On Tue, 2015-12-22 at 06:18 +0200, igal.liberman@xxxxxxxxxxxxx wrote: > From: Igal Liberman <igal.liberman@xxxxxxxxxxxxx> > > Signed-off-by: Igal Liberman <igal.liberman@xxxxxxxxxxxxx> > --- > .../devicetree/bindings/powerpc/fsl/fman.txt | 39 ++++++++++++++++++++ > 1 file changed, 39 insertions(+) > > diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt > b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt > index 1fc5328..7a6d7c3 100644 > --- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt > +++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt > @@ -315,6 +315,16 @@ PROPERTIES > Value type: <phandle> > Definition: A phandle for 1EEE1588 timer. > > +- pcsphy-handle > + Usage required for "fsl,fman-memac" MACs > + Value type: <phandle> > + Definition: A phandle for pcsphy. > + > +- tbi-handle > + Usage required for "fsl,fman-dtsec" MACs > + Value type: <phandle> > + Definition: A phandle for tbiphy. > + > EXAMPLE > > fman1_tx28: port@a8000 { > @@ -340,6 +350,7 @@ ethernet@e0000 { > reg = <0xe0000 0x1000>; > fsl,fman-ports = <&fman1_rx8 &fman1_tx28>; > ptp-timer = <&ptp-timer>; > + tbi-handle = <&tbi0>; > }; > > ============================================================================ > @@ -415,6 +426,13 @@ PROPERTIES > The settings and programming routines for internal/external > MDIO are different. Must be included for internal MDIO. > > +For internal PHY device on internal mdio bus, a PHY node should be created. > +See the definition of the PHY node in booting-without-of.txt for an > +example of how to define a PHY (Internal PHY has no interrupt line). > +- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY. > +- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY, > + PCS PHY addr must be '0'. Will this replace the need for fixed PHYs ? Jocke-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html