Hi Andy,
Am Dienstag, 22. Dezember 2015, 17:16:52 schrieb Andy Yan:
> Add reboot mode driver DT node for rk3xxx,rk3288 platform
in general, I like that concept a lot :-) . Below some small issues.
> Signed-off-by: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
>
> ---
>
> Changes in v1:
> - correct the maskrom magic number
> - use macro defined in rockchip_boot-mode.h for reboot-mode DT node
>
> arch/arm/boot/dts/rk3288.dtsi | 26 ++++++++++++++++++++++++++
> arch/arm/boot/dts/rk3xxx.dtsi | 26 ++++++++++++++++++++++++++
> 2 files changed, 52 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 04ea209..c6ea207 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -45,6 +45,7 @@
> #include <dt-bindings/clock/rk3288-cru.h>
> #include <dt-bindings/thermal/thermal.h>
> #include <dt-bindings/power/rk3288-power.h>
> +#include <dt-bindings/soc/rockchip_boot-mode.h>
> #include "skeleton.dtsi"
>
> / {
> @@ -170,6 +171,31 @@
> };
> };
>
> + reboot_mode {
nodes are commonly written with a dash "-" instead of an underscore "_".
> + compatible = "rockchip,reboot-mode";
> + rockchip,regmap = <&pmu>;
I do believe this should be a sub-node of the pmu, similar to the power-
domains. Due to the "simple-mfd" compatible of the pmu, it will get probed
automatically and the driver can than get the regmap via
parent = dev->parent;
regmap = syscon_node_to_regmap(parent->of_node);
as the power-domains do and therefore also doesn't need the rockchip,regmap
property.
> + offset = <0x94>;
> + loader {
> + linux,mode = "loader";
> + linux,magic = <BOOT_LOADER>;
linux,mode seems correct, but the magic value is actually not linux-specific
but instead firmware-specific, so I'm not sure about that linux-prefix there
But I guess that would be for the dt-people :-)
> + };
> +
> + maskrom {
> + linux,mode = "maskrom";
> + linux,magic = <BOOT_MASKROM>;
> + };
Just for my understanding, while I expect the bootloader to interpret the
other values, does the maskrom read and handle this one?
> +
> + recovery {
> + linux,mode = "recovery";
> + linux,magic = <BOOT_RECOVERY>;
> + };
> +
> + fastboot {
> + linux,mode = "fastboot";
> + linux,magic = <BOOT_FASTBOOT>;
> + };
> + };
> +
> reserved-memory {
> #address-cells = <1>;
> #size-cells = <1>;
I do believe rk3288-veyron.dtsi would need some sort of special handling.
I don't think coreboot interprets most of those handles, but I guess only the
maskrom one would be handled by the maskrom?
Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
