On Mon, Dec 21, 2015 at 2:18 PM, Chen-Yu Tsai <wens@xxxxxxxx> wrote: > Hi, > > On Sat, Dec 19, 2015 at 11:05 PM, <codekipper@xxxxxxxxx> wrote: >> From: Marcus Cooper <codekipper@xxxxxxxxx> >> >> Itead have a core module board that can be populated with either >> an Allwinner A10 or A20 SoC. This patch creates a common dtsi >> which these boards can use. >> >> Signed-off-by: Marcus Cooper <codekipper@xxxxxxxxx> >> --- >> arch/arm/boot/dts/sunxi-itead-core-common.dtsi | 114 +++++++++++++++++++++++++ >> 1 file changed, 114 insertions(+) >> create mode 100644 arch/arm/boot/dts/sunxi-itead-core-common.dtsi >> >> diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi >> new file mode 100644 >> index 0000000..41449fa >> --- /dev/null >> +++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi >> @@ -0,0 +1,114 @@ >> +/* >> + * Copyright 2015 - Marcus Cooper <codekipper@xxxxxxxxx> >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPL or the X11 license, at your option. Note that this dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This file is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of the >> + * License, or (at your option) any later version. >> + * >> + * This file is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + */ >> + >> +#include "sunxi-common-regulators.dtsi" >> + >> +#include <dt-bindings/gpio/gpio.h> >> +#include <dt-bindings/interrupt-controller/irq.h> >> +#include <dt-bindings/pinctrl/sun4i-a10.h> >> + >> +/ { >> + aliases { >> + serial0 = &uart0; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> +}; >> + >> +&ahci { >> + target-supply = <®_ahci_5v>; >> + status = "okay"; >> +}; >> + >> +&codec { >> + status = "okay"; >> +}; >> + >> +&ehci0 { >> + status = "okay"; >> +}; >> + >> +&ehci1 { >> + status = "okay"; >> +}; >> + >> +&i2c1 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&i2c1_pins_a>; >> + status = "okay"; >> +}; >> + >> +&ohci0 { >> + status = "okay"; >> +}; >> + >> +&ohci1 { >> + status = "okay"; >> +}; >> + >> +®_ahci_5v { >> + pinctrl-0 = <&ahci_pwr_pin_a>; >> + gpio = <&pio 1 8 GPIO_ACTIVE_HIGH>; > > These 2 lines are in sunxi-common-regulators.dtsi. No need to repeat them here. > > Otherwise, > > Acked-by: Chen-Yu Tsai <wens@xxxxxxxx> On second thought: What happens when you have a base board that doesn't support all the peripherals you enabled here? Like a small baseboard without SATA? Thanks ChenYu >> + status = "okay"; >> +}; >> + >> +®_usb1_vbus { >> + status = "okay"; >> +}; >> + >> +®_usb2_vbus { >> + status = "okay"; >> +}; >> + >> +&uart0 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&uart0_pins_a>; >> + status = "okay"; >> +}; >> + >> +&usbphy { >> + usb1_vbus-supply = <®_usb1_vbus>; >> + usb2_vbus-supply = <®_usb2_vbus>; >> + status = "okay"; >> +}; >> -- >> 1.9.1 >> >> -- >> You received this message because you are subscribed to the Google Groups "linux-sunxi" group. >> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx. >> For more options, visit https://groups.google.com/d/optout. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html