On Fri, Dec 18, 2015 at 01:47:14AM +0300, Sergei Shtylyov wrote: > Maxim Integrated MAX3355E chip integrates a charge pump and comparators to > enable a system with an integrated USB OTG dual-role transceiver to > function as an USB OTG dual-role device. In addition to sensing/controlling > Vbus, the chip also passes thru the ID signal from the USB OTG connector. > On some Renesas boards, this signal is just fed into the SoC thru a GPIO > pin -- there's no real OTG controller, only host and gadget USB controllers > sharing the same USB bus; however, we'd like to allow host or gadget > drivers to be loaded depending on the cable type, hence the need for the > MAX3355 extcon driver. The Vbus status signals are also wired to GPIOs > (however, we aren't currently interested in them), the OFFVBUS# signal is > controlled by the host controllers, there's also the SHDN# signal wired to > a GPIO, it should be driven high for the normal operation. > > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx> > > --- > The patch is against the 'extcon-next' branch of the 'extcon.git' repo. > > Changes in version 4: > - stopped calling kstrdup() for the device name; > - removed unneeded 'owner' field initializer; > - moved devm_extcon_allocate() call further down in the probe() method; > - extended the driver copyright; > - indented the continuation lines in the binding document. > > Changes in version 3: > - reformatted the change log. > > Changes in version 2: > - added the USB gadget cable support; > - added the remove() driver method which drives SHDN# GPIO low to save power; > - dropped vendor prefix from the ID GPIO property name; > - changed the GPIO property name suffix to "-gpios"; > - switched to usign extcon_set_cable_state_() API; > - switched to using the gpiod/sleeping 'gpiolib' APIs; > - addded error messages to max3355_probe(); > - added IRQF_NO_SUSPEND flasg to the devm_request_threaded_irq() call; > - renamed 'ret' variable to 'err' in max3355_probe(); > - expanded the Kconfig entry help text; > - added vendor name to the patch summary, the bindings document, the Kconfig > entry, the driver heading comment, the module description, and the change log; > - fixed up and reformatted the change log. > > Documentation/devicetree/bindings/extcon/extcon-max3355.txt | 21 + Acked-by: Rob Herring <robh@xxxxxxxxxx> > drivers/extcon/Kconfig | 8 > drivers/extcon/Makefile | 1 > drivers/extcon/extcon-max3355.c | 151 ++++++++++++ > 4 files changed, 181 insertions(+) -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
