This commit adds documentation for the Technologic Systems version of SJA1000. The difference with the NXP version is in the way the registers are accessed. Signed-off-by: Damien Riegel <damien.riegel@xxxxxxxxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/net/can/sja1000.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/can/sja1000.txt b/Documentation/devicetree/bindings/net/can/sja1000.txt index b4a6d53..7a158d5 100644 --- a/Documentation/devicetree/bindings/net/can/sja1000.txt +++ b/Documentation/devicetree/bindings/net/can/sja1000.txt @@ -2,7 +2,7 @@ Memory mapped SJA1000 CAN controller from NXP (formerly Philips) Required properties: -- compatible : should be "nxp,sja1000". +- compatible : should be one of "nxp,sja1000", "technologic,sja1000". - reg : should specify the chip select, address offset and size required to map the registers of the SJA1000. The size is usually 0x80. @@ -14,6 +14,7 @@ Optional properties: - reg-io-width : Specify the size (in bytes) of the IO accesses that should be performed on the device. Valid value is 1, 2 or 4. + Must be set to 2 for technologic version. Default to 1 (8 bits). - nxp,external-clock-frequency : Frequency of the external oscillator -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
