On Mon, Dec 14, 2015 at 03:42:07PM -0700, Joshua Henderson wrote:
dt/bindings: ... is preferred for the subject.
> This adds support for the Microchip PIC32 platform along with the
> specific variant PIC32MZDA on a PIC32MZDA Starter Kit.
>
> Signed-off-by: Joshua Henderson <joshua.henderson@xxxxxxxxxxxxx>
> Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> .../bindings/mips/pic32/microchip,pic32mzda.txt | 33 ++++++++++++++++++++
> 1 file changed, 33 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mips/pic32/microchip,pic32mzda.txt
>
> diff --git a/Documentation/devicetree/bindings/mips/pic32/microchip,pic32mzda.txt b/Documentation/devicetree/bindings/mips/pic32/microchip,pic32mzda.txt
> new file mode 100644
> index 0000000..bcf3e04
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/pic32/microchip,pic32mzda.txt
> @@ -0,0 +1,33 @@
> +* Microchip PIC32MZDA Platforms
> +
> +PIC32MZDA Starter Kit
> +Required root node properties:
> + - compatible = "microchip,pic32mzda-sk", "microchip,pic32mzda"
> +
> +CPU nodes:
> +----------
> +A "cpus" node is required. Required properties:
> + - #address-cells: Must be 1.
> + - #size-cells: Must be 0.
> +A CPU sub-node is also required. Required properties:
> + - device_type: Must be "cpu".
> + - compatible: Must be "mti,mips14KEc".
> +Example:
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "mti,mips14KEc";
> + };
> + };
> +
> +Boot protocol
> +--------------
> +In accordance with the MIPS UHI specification[1], the bootloader must pass the
> +following arguments to the kernel:
> + - $a0: -2.
> + - $a1: KSEG0 address of the flattened device-tree blob.
> +
> +[1] http://prplfoundation.org/wiki/MIPS_documentation
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
