The pinctrl gpio pull up/down is incorrect since the rk3036 SoCs
can't set the status in the internal.
We should keep the default status for enable the gpio status,
In fact, the pull_none is the disable the gpio pull up/down.
Signed-off-by: Xing Zheng <zhengxing@xxxxxxxxxxxxxx>
Signed-off-by: Caesar Wang <wxt@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/rk3036.dtsi | 34 +++++++++++++++-------------------
1 file changed, 15 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index f8758bf..620e6e0 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -427,12 +427,8 @@
#interrupt-cells = <2>;
};
- pcfg_pull_up: pcfg-pull-up {
- bias-pull-up;
- };
-
- pcfg_pull_down: pcfg-pull-down {
- bias-pull-down;
+ pcfg_pull_default: pcfg_pull_default {
+ bias-pull-pin-default;
};
pcfg_pull_none: pcfg-pull-none {
@@ -473,18 +469,18 @@
};
emmc_cmd: emmc-cmd {
- rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_default>;
};
emmc_bus8: emmc-bus8 {
- rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
- <1 25 RK_FUNC_2 &pcfg_pull_none>,
- <1 26 RK_FUNC_2 &pcfg_pull_none>,
- <1 27 RK_FUNC_2 &pcfg_pull_none>,
- <1 28 RK_FUNC_2 &pcfg_pull_none>,
- <1 29 RK_FUNC_2 &pcfg_pull_none>,
- <1 30 RK_FUNC_2 &pcfg_pull_none>,
- <1 31 RK_FUNC_2 &pcfg_pull_none>;
+ rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_default>,
+ <1 25 RK_FUNC_2 &pcfg_pull_default>,
+ <1 26 RK_FUNC_2 &pcfg_pull_default>,
+ <1 27 RK_FUNC_2 &pcfg_pull_default>,
+ <1 28 RK_FUNC_2 &pcfg_pull_default>,
+ <1 29 RK_FUNC_2 &pcfg_pull_default>,
+ <1 30 RK_FUNC_2 &pcfg_pull_default>,
+ <1 31 RK_FUNC_2 &pcfg_pull_default>;
};
};
@@ -522,12 +518,12 @@
uart0 {
uart0_xfer: uart0-xfer {
- rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_up>,
+ rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>,
<0 17 RK_FUNC_1 &pcfg_pull_none>;
};
uart0_cts: uart0-cts {
- rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_default>;
};
uart0_rts: uart0-rts {
@@ -537,7 +533,7 @@
uart1 {
uart1_xfer: uart1-xfer {
- rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
+ rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_default>,
<2 23 RK_FUNC_1 &pcfg_pull_none>;
};
/* no rts / cts for uart1 */
@@ -545,7 +541,7 @@
uart2 {
uart2_xfer: uart2-xfer {
- rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+ rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_default>,
<1 19 RK_FUNC_2 &pcfg_pull_none>;
};
/* no rts / cts for uart2 */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
