Hi Laurent,
On Wednesday 16 December 2015 09:47:58 Laurent Pinchart wrote:
> Hi Markus,
>
> Thank you for the patch.
>
> On Monday 14 December 2015 15:41:53 Markus Pargmann wrote:
> > This patch adds V4L2 controls for Auto Exposure Control and Auto Gain
> > Control settings. These settings include low pass filter, update
> > frequency of these settings and the update interval for those units.
> >
> > Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
>
> Please see below for a few comments. If you agree about them there's no need
> to resubmit, I'll fix the patch when applying.
Most of them are fine, I commented on the open ones.
>
> > ---
> > drivers/media/i2c/mt9v032.c | 153 ++++++++++++++++++++++++++++++++++++++++-
> > 1 file changed, 152 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c
> > index cc16acf001de..6cbc3b87eda9 100644
> > --- a/drivers/media/i2c/mt9v032.c
> > +++ b/drivers/media/i2c/mt9v032.c
>
> [snip]
>
> > enum mt9v032_model {
> > @@ -162,6 +169,8 @@ struct mt9v032_model_data {
> > unsigned int min_shutter;
> > unsigned int max_shutter;
> > unsigned int pclk_reg;
> > + unsigned int aec_max_shutter_reg;
> > + const struct v4l2_ctrl_config * const aec_max_shutter_v4l2_ctrl;
> > };
> >
> > struct mt9v032_model_info {
> > @@ -175,6 +184,9 @@ static const struct mt9v032_model_version
> > mt9v032_versions[] = { { MT9V034_CHIP_ID_REV1, "MT9V024/MT9V034 rev1" },
> > };
> >
> > +static const struct v4l2_ctrl_config mt9v032_aec_max_shutter_width;
> > +static const struct v4l2_ctrl_config mt9v034_aec_max_shutter_width;
>
> We can avoid forward declarations by moving the mt9v032_model_data array
> further down in the driver.
>
> > static const struct mt9v032_model_data mt9v032_model_data[] = {
> > {
> > /* MT9V022, MT9V032 revisions 1/2/3 */
>
> [snip]
>
> > @@ 647,6 +663,33 @@ static int mt9v032_set_selection(struct v4l2_subdev
> > *subdev, */
> >
> > #define V4L2_CID_TEST_PATTERN_COLOR (V4L2_CID_USER_BASE | 0x1001)
> > +/*
> > + * Value between 1 and 64 to set the desired bin. This is effectively a
> > measure + * of how bright the image is supposed to be. Both AGC and AEC try
> > to reach + * this.
> > + */
> > +#define V4L2_CID_AEGC_DESIRED_BIN (V4L2_CID_USER_BASE | 0x1002)
> > +/*
> > + * LPF is the low pass filter capability of the chip. Both AEC and AGC have
> > + * this setting. This limits the speed in which AGC/AEC adjust their
> > settings.
> > + * Possible values are 0-2. 0 means no LPF. For 1 and 2 this equation is
> > used:
> > + * if |(Calculated new exp - current exp)| > (current exp / 4)
> > + * next exp = Calculated new exp
> > + * else
> > + * next exp = Current exp + ((Calculated new exp - current exp) /
> 2^LPF)
>
> Over 80 columns, you can fix it by just reducing the indentation by one tab.
>
> > + */
> > +#define V4L2_CID_AEC_LPF (V4L2_CID_USER_BASE | 0x1003)
> > +#define V4L2_CID_AGC_LPF (V4L2_CID_USER_BASE | 0x1004)
> > +/*
> > + * Value between 0 and 15. This is the number of frames being skipped
> > before
> > + * updating the auto exposure/gain.
> > + */
> > +#define V4L2_CID_AEC_UPDATE_INTERVAL (V4L2_CID_USER_BASE | 0x1005)
> > +#define V4L2_CID_AGC_UPDATE_INTERVAL (V4L2_CID_USER_BASE | 0x1006)
> > +/*
> > + * Maximum shutter width used for AEC.
> > + */
> > +#define V4L2_CID_AEC_MAX_SHUTTER_WIDTH (V4L2_CID_USER_BASE | 0x1007)
>
> [snip]
>
> > @@ -745,6 +810,84 @@ static const struct v4l2_ctrl_config
> > mt9v032_test_pattern_color = { .flags = 0,
> > };
> >
> > +static const struct v4l2_ctrl_config mt9v032_aegc_controls[] = {
> > + {
> > + .ops = &mt9v032_ctrl_ops,
> > + .id = V4L2_CID_AEGC_DESIRED_BIN,
> > + .type = V4L2_CTRL_TYPE_INTEGER,
> > + .name = "aec_agc_desired_bin",
>
> I forgot to reply to your e-mail asking what proper controls names would be,
> sorry.
>
> V4L2 control names contain spaces and use uppercase as needed. This one could
> be "AEC/AGC Desired Bin" for instance.
Ah I see. I was just wondering as v4l2-ctl showed everything with lowercase
letters and underscores. But with a closer look it seems something between
driver and v4l2-ctl translates them from uppercase/spaces to
lowercase/underscores. So yes that's fine then and makes sense.
>
> > + .min = 1,
> > + .max = 64,
> > + .step = 1,
> > + .def = 58,
> > + .flags = 0,
> > + }, {
> > + .ops = &mt9v032_ctrl_ops,
> > + .id = V4L2_CID_AEC_LPF,
> > + .type = V4L2_CTRL_TYPE_INTEGER,
> > + .name = "aec_lpf",
> > + .min = 0,
> > + .max = 2,
> > + .step = 1,
> > + .def = 0,
> > + .flags = 0,
> > + }, {
> > + .ops = &mt9v032_ctrl_ops,
> > + .id = V4L2_CID_AGC_LPF,
> > + .type = V4L2_CTRL_TYPE_INTEGER,
> > + .name = "agc_lpf",
> > + .min = 0,
> > + .max = 2,
> > + .step = 1,
> > + .def = 2,
> > + .flags = 0,
> > + }, {
> > + .ops = &mt9v032_ctrl_ops,
> > + .id = V4L2_CID_AEC_UPDATE_INTERVAL,
> > + .type = V4L2_CTRL_TYPE_INTEGER,
> > + .name = "aec_update_interval",
> > + .min = 0,
> > + .max = 16,
> > + .step = 1,
> > + .def = 2,
> > + .flags = 0,
> > + }, {
> > + .ops = &mt9v032_ctrl_ops,
> > + .id = V4L2_CID_AGC_UPDATE_INTERVAL,
> > + .type = V4L2_CTRL_TYPE_INTEGER,
> > + .name = "agc_update_interval",
> > + .min = 0,
> > + .max = 16,
> > + .step = 1,
> > + .def = 2,
> > + .flags = 0,
> > + }
> > +};
> > +
> > +static const struct v4l2_ctrl_config mt9v032_aec_max_shutter_width = {
> > + .ops = &mt9v032_ctrl_ops,
> > + .id = V4L2_CID_AEC_MAX_SHUTTER_WIDTH,
> > + .type = V4L2_CTRL_TYPE_INTEGER,
> > + .name = "aec_max_shutter_width",
> > + .min = 1,
> > + .max = MT9V032_TOTAL_SHUTTER_WIDTH_MAX,
>
> According the the MT9V032 datasheet I have, the maximum value is 2047 while
> MT9V032_TOTAL_SHUTTER_WIDTH_MAX is defined as 32767. Do you have any
> information that would hint for an error in the datasheet ?
The register is defined as having 15 bits. I simply assumed that the already
defined TOTAL_SHUTTER_WIDTH_MAX would apply for this register as well. At least
it should end up controlling the same property of the chip. I didn't test this
on mt9v032 but on mt9v024.
Thanks,
Markus
>
> > + .step = 1,
> > + .def = MT9V032_TOTAL_SHUTTER_WIDTH_DEF,
> > + .flags = 0,
> > +};
> > +
> > +static const struct v4l2_ctrl_config mt9v034_aec_max_shutter_width = {
> > + .ops = &mt9v032_ctrl_ops,
> > + .id = V4L2_CID_AEC_MAX_SHUTTER_WIDTH,
> > + .type = V4L2_CTRL_TYPE_INTEGER,
> > + .name = "aec_max_shutter_width",
> > + .min = 1,
> > + .max = MT9V034_TOTAL_SHUTTER_WIDTH_MAX,
> > + .step = 1,
> > + .def = MT9V032_TOTAL_SHUTTER_WIDTH_DEF,
> > + .flags = 0,
> > +};
>
> [snip]
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Attachment:
signature.asc
Description: This is a digitally signed message part.
