This patch adds basic dts file for imx6qp-sabreauto board.
Signed-off-by: Bai Ping <b51503@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6qp-sabreauto.dts | 67 ++++++++++++++++++++++++++++++++++
2 files changed, 68 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6qp-sabreauto.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index dfba765..7996a51 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -329,6 +329,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-phytec-pbab01.dtb \
imx6q-rex-pro.dtb \
imx6q-sabreauto.dtb \
+ imx6qp-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
imx6q-sbc6x.dtb \
diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts
new file mode 100644
index 0000000..b24aae6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "imx6q-sabreauto.dts"
+#include "imx6qp.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
+ compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+};
+
+
+&fec {
+ pinctrl-assert-gpios = <&max7322 0 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c2 {
+ max7322: gpio@68 {
+ compatible = "maxim,max7322";
+ reg = <0x68>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&iomuxc {
+ imx6qdl-sabreauto {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b018
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b018
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b018
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b018
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b018
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b018
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b018
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b018
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b018
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b018
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b018
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b018
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+ };
+};
+
+&pcie {
+ reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&vgen3_reg {
+ regulator-always-on;
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
