The i.MX6Quad Plus processor is an high performance SOC of i.MX6 family.
It has enhanced graphics performance and increased overall memory bandwidth
compared to i.MX6Q. Most of the design are same as i.MX6Quad/Dual, so code
for i.MX6Quad can be resued by this chip. The revision number is identied as
i.MX6Q Rev2.0, but actually it is a new chip, as we did many change to the
overall architecture.
This patch adds basic dtsi file support for the new i.MX6Quad Plus processor.
Signed-off-by: Bai Ping <b51503@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx6q.dtsi | 2 +-
arch/arm/boot/dts/imx6qp.dtsi | 157 ++++++++++++++++++++++++++++++
include/dt-bindings/clock/imx6qdl-clock.h | 16 ++-
3 files changed, 173 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6qp.dtsi
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index a266a56..e26d0fd 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -22,7 +22,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
new file mode 100644
index 0000000..e43751f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -0,0 +1,157 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/ {
+ aliases {
+ pre0 = &pre1;
+ pre1 = &pre2;
+ pre2 = &pre3;
+ pre3 = &pre4;
+ prg0 = &prg1;
+ prg1 = &prg2;
+ };
+
+ soc {
+ ocram_2: sram@00940000 {
+ compatible = "mmio-sram";
+ reg = <0x00940000 0x20000>;
+ clocks = <&clks IMX6QDL_CLK_OCRAM>;
+ };
+
+ ocram_3: sram@00960000 {
+ compatible = "mmio-sram";
+ reg = <0x00960000 0x20000>;
+ clocks = <&clks IMX6QDL_CLK_OCRAM>;
+ };
+
+ pcie: pcie@0x01000000 {
+ compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
+ reg = <0x01ffc000 0x4000>, <0x01f00000 0x80000>;
+ reg-names = "dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
+ num-lanes = <1>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_PCIE_REF_125M>,
+ <&clks IMX6QDL_CLK_SATA_REF_100M>,
+ <&clks IMX6QDL_CLK_LVDS1_GATE>, <&clks IMX6QDL_CLK_PCIE_AXI>;
+ clock-names = "pcie_phy", "ref_100m", "pcie_bus", "pcie";
+ status = "disabled";
+ };
+
+ aips-bus@02100000 { /* AIPS2 */
+ pre1: pre@021c8000 {
+ compatible = "fsl,imx6q-pre";
+ reg = <0x021c8000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRE0>;
+ interrupts = <0 90 IRQ_TYPE_EDGE_RISING>;
+ ocram = <&ocram_2>;
+ status = "disabled";
+ };
+
+ pre2: pre@021c9000 {
+ compatible = "fsl,imx6q-pre";
+ reg = <0x021c9000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRE1>;
+ interrupts = <0 97 IRQ_TYPE_EDGE_RISING>;
+ ocram = <&ocram_2>;
+ status = "disabled";
+ };
+
+ pre3: pre@021ca000 {
+ compatible = "fsl,imx6q-pre";
+ reg = <0x021ca000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRE2>;
+ interrupts = <0 98 IRQ_TYPE_EDGE_RISING>;
+ ocram = <&ocram_3>;
+ status = "disabled";
+ };
+
+ pre4: pre@021cb000 {
+ compatible = "fsl,imx6q-pre";
+ reg = <0x021cb000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRE3>;
+ interrupts = <0 99 IRQ_TYPE_EDGE_RISING>;
+ ocram = <&ocram_3>;
+ status = "disabled";
+ };
+
+ prg1: prg@021cc000 {
+ compatible = "fsl,imx6q-prg";
+ reg = <0x021cc000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRG0_AXI>,
+ <&clks IMX6QDL_CLK_PRG0_APB>;
+ clock-names = "axi", "apb";
+ gpr = <&gpr>;
+ status = "disabled";
+ };
+
+ prg2: prg@021cd000 {
+ compatible = "fsl,imx6q-prg";
+ reg = <0x021cd000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRG1_AXI>,
+ <&clks IMX6QDL_CLK_PRG1_APB>;
+ clock-names = "axi", "apb";
+ gpr = <&gpr>;
+ status = "disabled";
+ };
+ };
+
+ ipu1: ipu@02400000 {
+ compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+ clocks = <&clks IMX6QDL_CLK_IPU1>,
+ <&clks IMX6QDL_CLK_IPU1_DI0>, <&clks IMX6QDL_CLK_IPU1_DI1>,
+ <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>,
+ <&clks IMX6QDL_CLK_PRG0_APB>;
+ clock-names = "bus",
+ "di0", "di1",
+ "di0_sel", "di1_sel",
+ "ldb_di0", "ldb_di1", "prg";
+ };
+
+ ipu2: ipu@02800000 {
+ compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+ clocks = <&clks IMX6QDL_CLK_IPU2>,
+ <&clks IMX6QDL_CLK_IPU2_DI0>, <&clks IMX6QDL_CLK_IPU2_DI1>,
+ <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>,
+ <&clks IMX6QDL_CLK_PRG1_APB>;
+ clock-names = "bus",
+ "di0", "di1",
+ "di0_sel", "di1_sel",
+ "ldb_di0", "ldb_di1", "prg";
+ };
+
+ sata: sata@02200000 {
+ compatible = "fsl,imx6qp-ahci";
+ reg = <0x02200000 0x4000>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_SATA>,
+ <&clks IMX6QDL_CLK_SATA_REF_100M>,
+ <&clks IMX6QDL_CLK_AHB>;
+ clock-names = "sata", "sata_ref", "ahb";
+ status = "disabled";
+ };
+ };
+};
+
+&ldb {
+ compatible = "fsl,imx6qp-ldb", "fsl,imx6q-ldb", "fsl,imx53-ldb";
+};
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
index 77985cc..2905033 100644
--- a/include/dt-bindings/clock/imx6qdl-clock.h
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -255,6 +255,20 @@
#define IMX6QDL_CLK_CAAM_ACLK 242
#define IMX6QDL_CLK_CAAM_IPG 243
#define IMX6QDL_CLK_SPDIF_GCLK 244
-#define IMX6QDL_CLK_END 245
+#define IMX6QDL_CLK_UART_SEL 245
+#define IMX6QDL_CLK_IPG_PER_SEL 246
+#define IMX6QDL_CLK_ECSPI_SEL 247
+#define IMX6QDL_CLK_CAN_SEL 248
+#define IMX6QDL_CLK_MMDC_CH1_AXI_CG 249
+#define IMX6QDL_CLK_PRE0 250
+#define IMX6QDL_CLK_PRE1 251
+#define IMX6QDL_CLK_PRE2 252
+#define IMX6QDL_CLK_PRE3 253
+#define IMX6QDL_CLK_PRG0_AXI 254
+#define IMX6QDL_CLK_PRG1_AXI 255
+#define IMX6QDL_CLK_PRG0_APB 256
+#define IMX6QDL_CLK_PRG1_APB 257
+#define IMX6QDL_CLK_PRE_AXI 258
+#define IMX6QDL_CLK_END 259
#endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
