On 2015년 12월 14일 19:37, Charles Keepax wrote: > Add an example for all elements of the Arizona extcon device tree > binding. > > Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx> > --- > .../devicetree/bindings/extcon/extcon-arizona.txt | 26 ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt > index fd9b898..e27341f 100644 > --- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt > +++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt > @@ -47,3 +47,29 @@ Optional properties: > The third cell represents the value of the micd-pol-gpio pin. > > - wlf,gpsw : Settings for the general purpose switch > + > +Example: > + > +codec: wm8280@0 { > + compatible = "wlf,wm8280"; > + reg = <0>; > + ... > + > + wlf,use-jd2; > + wlf,use-jd2-nopull; > + wlf,jd-invert; > + > + wlf,micd-software-compare; > + wlf,micd-detect-debounce = <0>; > + wlf,micd-pol-gpio = <&codec 2 0>; > + wlf,micd-rate = <ARIZONA_MICD_TIME_8MS>; > + wlf,micd-dbtime = <4>; > + wlf,micd-timeout-ms = <100>; > + wlf,micd-force-micbias; > + wlf,micd-configs = < > + 0 1 0 /* MICDET1 MICBIAS1 GPIO=low */ > + 1 2 1 /* MICDET2 MICBIAS2 GPIO=high */ > + >; > + > + wlf,gpsw = <0>; > +}; > Looks good to me. Applied it. Thanks, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html