[PATCH v2 5/9] ARM: shmobile: lager dts: Enable SCIF_CLK frequency and pins

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.

This increases the range and accuracy of supported baud rates.

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
Untested, based on schematics.

v2:
  - New.
---
 arch/arm/boot/dts/r8a7790-lager.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 44ba69b974a21de2..7773cb1f10317d85 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -291,6 +291,9 @@
 };
 
 &pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
 	du_pins: du {
 		renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
 		renesas,function = "du";
@@ -301,6 +304,11 @@
 		renesas,function = "scif0";
 	};
 
+	scif_clk_pins: scif_clk {
+		renesas,groups = "scif_clk";
+		renesas,function = "scif_clk";
+	};
+
 	ether_pins: ether {
 		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
 		renesas,function = "eth";
@@ -484,6 +492,11 @@
 	status = "okay";
 };
 
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
 &msiof1 {
 	pinctrl-0 = <&msiof1_pins>;
 	pinctrl-names = "default";
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux