Add dt-binding documentation for generic onboard USB HUB.
Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
---
.../devicetree/bindings/usb/generic-onboard-hub.txt | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/generic-onboard-hub.txt
diff --git a/Documentation/devicetree/bindings/usb/generic-onboard-hub.txt b/Documentation/devicetree/bindings/usb/generic-onboard-hub.txt
new file mode 100644
index 0000000..d19d912
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/generic-onboard-hub.txt
@@ -0,0 +1,20 @@
+Generic Onboard USB HUB
+
+Required properties:
+- compatible: should be "generic-onboard-hub"
+
+Optional properties:
+- clocks: the input clock for USB HUB.
+- clock-frequency: the frequency for HUB's clock.
+- reset-gpios: Should specify the GPIO for reset.
+- reset-duration-us: the duration for assert reset signal, the time unit
+ is microsecond.
+
+Example:
+
+ usb_hub1 {
+ compatible = "generic-onboard-hub";
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ hub-reset-duration-us = <2>;
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
