This patch-set includes the two features as following. The generic exynos bus frequency driver is able to support almost Exynos SoCs for bus frequency scaling. And the new passive governor is able to make the dependency on between devices for frequency/voltage scaling. I had posted the patch-set[2] with the similiar concept. This is is revised version for exynos bus frequency. - Generic exynos bus frequency driver - New passive governor of DEVFREQ framework Depend on: - next-20151210 tag of linux-next (master branch). - Merge the latest devfreq patches on devfreq.git[2] (for-rafael branch). [1] https://git.kernel.org/cgit/linux/kernel/git/mzx/devfreq.git/ (branch: for-rafael) [2] https://lkml.org/lkml/2015/1/7/872 : [PATCHv3 0/8] devfreq: Add generic exynos memory-bus frequency driver Changes from v3: (https://lkml.org/lkml/2015/12/11/75) - Add the reviewed-by tag from Krzysztof Kozlowski (patch2/3/13/14/15/16/17) - Fix typo of the description on patch14 - Modify the subject and description of patch17 - Reorder the 'bus_xxx' device tree node alphabetically in both exynos3250-rinato/monk.dts and exynos4412-trats/odroidu3 Changes from v2: (https://lkml.org/lkml/2015/12/8/869) - Fix typo on documentation - Modify the more appropriate sentence on patch description - Add the detailed description about both parent and passive bus device - Modify the DMC frequency for Exynos4x12 DMC bus (200MHz -> 267MHz) - Modify the voltage of 200MHz was included in Exynos3250 DMC bus (800mV -> 825mV) - Rename OPP nodes as 'opp@<opp-hz>' - Delete the duplicate 'opp-microvolt' property of passive devfreq device - Reorder the 'bus_xxx' device tree node alphabetically in exynos3250-rinato/monk.dts - Reorder the 'bus_xxx' device tree node alphabetically in exynos4412-trats/odroidu3 - Add new exynos4412-ppmu-common.dtsi to remove the duplicate PPMU dt node on rinato/monk/trats2/odroid-u3 board - Add the log message if bus device is registered to devfreq framework successfully - Add the reviewed-by tag from Krzysztof Kozlowski - Add the tested-by tag from Anand Moon on Odroid U3 - Add 'SAMSUNG BUS FREQUENCY DRIVER' entry to MAINTAINERS Changes from v1: (https://lkml.org/lkml/2015/11/26/260) - Check whether the instance of regulator is NULL or not when executing regulator_disable() because of only parent devfreq device has the regulator instance. After fixing it, the wake-up from suspend state is well working. (patch1) - Fix bug which checks 'bus-clk' instead of 'bus->regulator' after calling devm_clk_get() (on patch1) - Update the documentation to remove the description about DEVFREQ-EVENT subsystem (on patch2) - Add the full name of DMC (Dynamic Memory Controller) (on patch2) - Modify the detailed correlation of buses for Exynos3250 on documentation (patch2) - Add the MFC bus node for Exynos3250 (on patch11, patch12) - Fix the duplicate frequency of bus_display on Exynos4x12.dtsi - Add the PPMU node for exynos4412-odroidu3 - Add the support of bus frequency for exynos4412-odroidu3 Detailed descirption for patch-set: 1. Add generic exynos bus frequency driver : This patch-set adds the generic exynos bus frequency driver for AXI bus of sub-blocks in exynos SoC. The Samsung Exynos SoC have the common architecture for bus between DRAM and sub-blocks in SoC. There are the different buses according to Exynos SoC because Exynos SoC has the differnt sub-blocks and bus speed. In spite of this difference among Exynos SoCs, this driver is able to support almost Exynos SoC by adding unique data of each bus in the devicetree file. In devicetree, each bus node has a bus clock, regulator, operation-point and devfreq-event devices which measure the utilization of each bus block. For example, - The bus of DMC block in exynos3250.dtsi are listed below: bus_dmc: bus_dmc { compatible = "samsung,exynos-bus"; clocks = <&cmu_dmc CLK_DIV_DMC>; clock-names = "bus"; operating-points-v2 = <&bus_dmc_opp_table>; status = "disabled"; }; bus_dmc_opp_table: opp_table1 { compatible = "operating-points-v2"; opp-shared; opp@50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <800000>; }; opp@100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <800000>; }; opp@134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <800000>; }; opp@200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <825000>; }; opp@400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <875000>; }; }; - Usage case to handle the frequency and voltage of bus on runtime in exynos3250-rinato.dts are listed below: &bus_dmc { devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; vdd-supply = <&buck1_reg>; /* VDD_MIF */ status = "okay"; }; 2. Add new passive governor of DEVFREQ framework (patch5-patch7) : This patch-set add the new passive governor for DEVFREQ framework. The existing governors (ondemand, performance and so on) are used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The existing governors are independently used for specific device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. The passive governor depends on operation of parent driver with existing governors(ondemand, performance and so on) extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: For exameple, There are one more bus device drivers in Exynos3250 which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, LEFTBUS bus driver is operated as parent with ondemand governor and then the rest device driver with passive governor. The buses of Internal block in exynos3250.dtsi are listed below: When LEFTBUS bus driver (parent) changes the bus frequency with ondemand governor on runtime, the rest bus devices which sharing the same power line (VDD_INT) will change the each bus frequency according to the decision of LEFTBUS bus driver (parent). - INT (Internal) block : VDD_INT |--- LEFTBUS |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM - The buss of INT block in exynos3250.dtsi are listed below: bus_leftbus: bus_leftbus { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_GDL>; clock-names = "bus"; operating-points-v2 = <&bus_leftbus_opp_table>; status = "disabled"; }; bus_rightbus: bus_rightbus { compatible = "samsung,exynos-bus"; clocks = <&cmu CLK_DIV_GDR>; clock-names = "bus"; operating-points-v2 = <&bus_leftbus_opp_table>; status = "disabled"; }; (Omit the rest bus dt node) - Usage case to handle the frequency and voltage of bus on runtime in exynos3250-rinato.dts are listed below: /* Parent bus device of VDD_INT */ &bus_leftbus { devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; vdd-supply = <&buck3_reg>; status = "okay"; }; /* Passive bus device depend on LEFTBUS bus. */ &bus_rightbus { devfreq = <&bus_leftbus>; /* 'devfreq' property indicates the phandle of parent device. */ status = "okay"; }; (Omit the rest bus dt node) Chanwoo Choi (20): PM / devfreq: exynos: Add generic exynos bus frequency driver PM / devfreq: exynos: Add documentation for generic exynos bus frequency driver ARM: dts: Add DMC bus node for Exynos3250 ARM: dts: Add DMC bus frequency for exynos3250-rinato/monk PM / devfreq: Add new passive governor PM / devfreq: Add devfreq_get_devfreq_by_phandle() PM / devfreq: Show the related information according to governor type PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor PM / devfreq: exynos: Update documentation for bus devices using passive governor PM / devfreq: exynos: Add the detailed correlation between sub-blocks and power line PM / devfreq: exynos: Remove unused exynos4/5 busfreq driver MAINTAINERS: Add samsung bus frequency driver entry ARM: dts: Add bus nodes using VDD_INT for Exynos3250 ARM: dts: Add bus nodes using VDD_MIF for Exynos4x12 ARM: dts: Add bus nodes using VDD_INT for Exynos4x12 ARM: dts: Add bus nodes using VDD_MIF for Exynos4210 ARM: dts: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodes ARM: dts: Add support of bus frequency using VDD_INT for exynos3250-rinato ARM: dts: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3 ARM: dts: Add support of bus frequency for exynos4412-trats/odroidu3 .../devicetree/bindings/devfreq/exynos-bus.txt | 388 +++++++ MAINTAINERS | 9 + arch/arm/boot/dts/exynos3250-monk.dts | 47 +- arch/arm/boot/dts/exynos3250-rinato.dts | 88 +- arch/arm/boot/dts/exynos3250.dtsi | 181 ++++ arch/arm/boot/dts/exynos4210.dtsi | 159 +++ arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 54 +- arch/arm/boot/dts/exynos4412-ppmu-common.dtsi | 50 + arch/arm/boot/dts/exynos4412-trats2.dts | 88 +- arch/arm/boot/dts/exynos4x12.dtsi | 174 ++++ drivers/devfreq/Kconfig | 37 +- drivers/devfreq/Makefile | 2 + drivers/devfreq/devfreq.c | 120 ++- drivers/devfreq/exynos/Makefile | 3 +- drivers/devfreq/exynos/exynos-bus.c | 556 +++++++++++ drivers/devfreq/exynos/exynos4_bus.c | 1055 -------------------- drivers/devfreq/exynos/exynos4_bus.h | 110 -- drivers/devfreq/exynos/exynos5_bus.c | 431 -------- drivers/devfreq/exynos/exynos_ppmu.c | 119 --- drivers/devfreq/exynos/exynos_ppmu.h | 86 -- drivers/devfreq/governor.h | 7 + drivers/devfreq/governor_passive.c | 109 ++ drivers/devfreq/governor_performance.c | 1 + drivers/devfreq/governor_powersave.c | 1 + drivers/devfreq/governor_simpleondemand.c | 1 + drivers/devfreq/governor_userspace.c | 1 + include/linux/devfreq.h | 26 + 27 files changed, 1955 insertions(+), 1948 deletions(-) create mode 100644 Documentation/devicetree/bindings/devfreq/exynos-bus.txt create mode 100644 arch/arm/boot/dts/exynos4412-ppmu-common.dtsi create mode 100644 drivers/devfreq/exynos/exynos-bus.c delete mode 100644 drivers/devfreq/exynos/exynos4_bus.c delete mode 100644 drivers/devfreq/exynos/exynos4_bus.h delete mode 100644 drivers/devfreq/exynos/exynos5_bus.c delete mode 100644 drivers/devfreq/exynos/exynos_ppmu.c delete mode 100644 drivers/devfreq/exynos/exynos_ppmu.h create mode 100644 drivers/devfreq/governor_passive.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
