On Tue, Dec 08, 2015 at 11:41:38AM -0500, Damien Riegel wrote: > This device tree adds support for TS-4800 by Technologic Systems. This > board is based on MX51-babbage, but there are some subtle differences in > the pins used, and there is an additional FPGA that is memory-mapped. > > More details here: > http://wiki.embeddedarm.com/wiki/TS-4800 > > Signed-off-by: Damien Riegel <damien.riegel@xxxxxxxxxxxxxxxxxxxx> It looks pretty neat. Some small comments are below. > --- > arch/arm/boot/dts/Makefile | 3 +- > arch/arm/boot/dts/imx51-ts4800.dts | 190 +++++++++++++++++++++++++++++++++++++ > 2 files changed, 192 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boot/dts/imx51-ts4800.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index bb8fa02..41b9985 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -258,7 +258,8 @@ dtb-$(CONFIG_SOC_IMX51) += \ > imx51-apf51dev.dtb \ > imx51-babbage.dtb \ > imx51-digi-connectcore-jsk.dtb \ > - imx51-eukrea-mbimxsd51-baseboard.dtb > + imx51-eukrea-mbimxsd51-baseboard.dtb \ > + imx51-ts4800.dtb > dtb-$(CONFIG_SOC_IMX53) += \ > imx53-ard.dtb \ > imx53-m53evk.dtb \ > diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts > new file mode 100644 > index 0000000..a0b2c6f > --- /dev/null > +++ b/arch/arm/boot/dts/imx51-ts4800.dts > @@ -0,0 +1,190 @@ > +/* > + * Copyright 2015 Savoir-faire Linux > + * > + * This device tree is based on imx51-babbage.dts > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ GPL/X11 dual licences are suggested for the new addition of the dts files. You can find a lot of examples in arch/arm/boot/dts. > + > +/dts-v1/; > +#include "imx51.dtsi" > + > +/ { > + model = "Technologic Systems TS-4800"; > + compatible = "technologic,imx51-ts4800", "fsl,imx51"; > + > + chosen { > + stdout-path = &uart1; > + }; > + > + memory { > + reg = <0x90000000 0x10000000>; > + }; > + > + soc { > + fpga { > + compatible = "simple-bus"; > + reg = <0xb0000000 0x1d000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + syscon: syscon@b0010000 { > + compatible = "syscon", "simple-mfd"; > + reg = <0xb0010000 0x3d>; > + reg-io-width = <2>; > + > + wdt@e { > + compatible = "technologic,ts4800-wdt"; > + syscon = <&syscon 0xe>; > + }; > + }; > + }; > + }; > + > + clocks { > + ckih1 { > + clock-frequency = <22579200>; > + }; > + > + ckih2 { > + clock-frequency = <24576000>; > + }; > + }; > +}; > + > +&esdhc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_esdhc1>; > + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; > + wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_fec>; > + phy-mode = "mii"; > + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; > + phy-reset-duration = <1>; > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + status = "okay"; > +}; > + > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3>; > + status = "okay"; > +}; > + > +&i2c2 { Move this node after &fec to get them sort alphabetically (iomuxc could be an exception). > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > + > + rtc: m41t00@68 { > + compatible = "stm,m41t00"; > + reg = <0x68>; > + }; > +}; > + > + > +&iomuxc { > + imx51-ts4800 { > + With commit 5fcdf6a7ed95 (pinctrl: imx: Allow parsing DT without function nodes) in place, this container node can just be saved now. Shawn > + pinctrl_ecspi1: ecspi1grp { > + fsl,pins = < > + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 > + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 > + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 > + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ > + >; > + }; > + > + pinctrl_esdhc1: esdhc1grp { > + fsl,pins = < > + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 > + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 > + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 > + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 > + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 > + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 > + MX51_PAD_GPIO1_0__GPIO1_0 0x100 > + MX51_PAD_GPIO1_1__GPIO1_1 0x100 > + >; > + }; > + > + pinctrl_fec: fecgrp { > + fsl,pins = < > + MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5 > + MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085 > + MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085 > + MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085 > + MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180 > + MX51_PAD_EIM_CS5__FEC_CRS 0x00000180 > + MX51_PAD_DISP2_DAT10__FEC_COL 0x00000180 > + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x00000180 > + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x00002180 > + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x00002004 > + MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004 > + MX51_PAD_DI2_PIN2__FEC_MDC 0x00002004 > + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x00002004 > + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x00002004 > + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x00002004 > + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x00002004 > + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x00002180 > + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x000020a4 > + MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */ > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed > + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 > + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 > + MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 > + MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 > + MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 > + >; > + }; > + > + pinctrl_uart3: uart3grp { > + fsl,pins = < > + MX51_PAD_EIM_D25__UART3_RXD 0x1c5 > + MX51_PAD_EIM_D26__UART3_TXD 0x1c5 > + MX51_PAD_EIM_D27__UART3_RTS 0x1c5 > + MX51_PAD_EIM_D24__UART3_CTS 0x1c5 > + >; > + }; > + > + }; > +}; > -- > 2.5.0 > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
