On Thu, Dec 10, 2015 at 09:28:38PM +0000, Simon Arlott wrote: > Add device tree binding for the BCM6345 soft reset controller. > > The BCM6345 contains a soft-reset controller activated by setting > a bit (that must previously have been cleared). > > Signed-off-by: Simon Arlott <simon@xxxxxxxxxxx> > --- > v3: Resend. Example has changed because usbh now has two compatible > strings and uses a power domain instead of a regulator. Not really all that important to this binding definition, so you can keep my ack. > > v2: Renamed to bcm6345, removed "mask" property. > Acked-by: Rob Herring <robh@xxxxxxxxxx> > > .../bindings/reset/brcm,bcm6345-reset.txt | 33 ++++++++++++++++++++++ > 1 file changed, 33 insertions(+) > create mode 100644 Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt > > diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt > new file mode 100644 > index 0000000..0313040 > --- /dev/null > +++ b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt > @@ -0,0 +1,33 @@ > +Broadcom BCM6345 reset controller > + > +The BCM6345 contains a basic soft reset controller in the perf register > +set which resets components using a bit in a register. > + > +Please also refer to reset.txt in this directory for common reset > +controller binding usage. > + > +Required properties: > +- compatible: Should be "brcm,bcm<soc>-reset", "brcm,bcm6345-reset" > +- regmap: The register map phandle > +- offset: Offset in the register map for the reset register (in bytes) > +- #reset-cells: Must be set to 1 > + > +Example: > + > +periph_soft_rst: reset-controller { > + compatible = "brcm,bcm63168-reset", "brcm,bcm6345-reset"; > + regmap = <&periph_cntl>; > + offset = <0x10>; > + > + #reset-cells = <1>; > +}; > + > +usbh: usbphy@10002700 { > + compatible = "brcm,bcm63168-usbh", "brcm,bcm6328-usbh"; > + reg = <0x10002700 0x38>; > + clocks = <&periph_clk 13>, <&timer_clk 18>; > + resets = <&periph_soft_rst 6>; > + power-domains = <&misc_iddq_ctrl 4>; > + #phy-cells = <0>; > +}; > + > -- > 2.1.4 > > -- > Simon Arlott -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html