Hi also pls fix this typo stmmac: create of compatible mdio bus for stmacc driver ^^^^^^^^ stmmac On 12/9/2015 9:39 AM, Phil Reid wrote:
The DSA driver needs to be passed a reference to an mdio bus. Typically the mac is configured to use a fixed link but the mdio bus still needs to be registered so that it con configure the switch. This patch follows the same process as the altera tse ethernet driver for creation of the mdio bus. Acked-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/net/stmmac.txt | 8 ++++++ drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 31 +++++++++++++++------- .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 +- 3 files changed, 31 insertions(+), 10 deletions(-) diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index f34fc3c..fd5ddf8 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -47,6 +47,7 @@ Optional properties: - snps,burst_len: The AXI burst lenth value of the AXI BUS MODE register. - tx-fifo-depth: See ethernet.txt file in the same directory - rx-fifo-depth: See ethernet.txt file in the same directory +- mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus. Examples: @@ -65,4 +66,11 @@ Examples: tx-fifo-depth = <16384>; clocks = <&clock>; clock-names = "stmmaceth"; + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy1: ethernet-phy@0 { + }; + }; }; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index bba670c..bb6f75c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -29,7 +29,7 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/of_gpio.h> - +#include <linux/of_mdio.h> #include <asm/io.h> #include "stmmac.h" @@ -200,10 +200,29 @@ int stmmac_mdio_register(struct net_device *ndev) struct stmmac_priv *priv = netdev_priv(ndev); struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data; int addr, found; + struct device_node *mdio_node = NULL; + struct device_node *child_node = NULL; if (!mdio_bus_data) return 0; + if (IS_ENABLED(CONFIG_OF)) { + for_each_child_of_node(priv->device->of_node, child_node) { + if (of_device_is_compatible(child_node, + "snps,dwmac-mdio")) { + mdio_node = child_node; + break; + } + } + + if (mdio_node) { + netdev_dbg(ndev, "FOUND MDIO subnode\n"); + } else { + netdev_err(ndev, "NO MDIO subnode\n"); + return 0; + } + } + new_bus = mdiobus_alloc(); if (new_bus == NULL) return -ENOMEM; @@ -231,7 +250,8 @@ int stmmac_mdio_register(struct net_device *ndev) new_bus->irq = irqlist; new_bus->phy_mask = mdio_bus_data->phy_mask; new_bus->parent = priv->device; - err = mdiobus_register(new_bus); + + err = of_mdiobus_register(new_bus, mdio_node); if (err != 0) { pr_err("%s: Cannot register as MDIO bus\n", new_bus->name); goto bus_register_fail; @@ -284,13 +304,6 @@ int stmmac_mdio_register(struct net_device *ndev) } } - if (!found) { - pr_warn("%s: No PHY found\n", ndev->name); - mdiobus_unregister(new_bus); - mdiobus_free(new_bus); - return -ENODEV; - }
hmm, this could be necessary on some platforms that wants to get the phy addr at runtime and in case of failure then removes the registered bus.
- priv->mii = new_bus; return 0; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index d02691b..6863420 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -146,7 +146,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0) dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n"); - if (plat->phy_node || plat->phy_bus_name)
can this breaks some conf case?
+ if (plat->phy_bus_name) plat->mdio_bus_data = NULL; else plat->mdio_bus_data =
peppe -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html