On 09.12.2015 13:08, Chanwoo Choi wrote:
> This patch adds the bus nodes using VDD_INT for Exynos3250 SoC.
> Exynos3250 has following AXI buses to translate data between
> DRAM and sub-blocks.
>
> Following list specifies the detailed relation between DRAM and sub-blocks:
> - ACLK400 clock for MCUISP
> - ACLK266 clock for ISP
> - ACLK200 clock for FSYS
> - ACLK160 clock for LCD0
> - ACLK100 clock for PERIL
> - GDL clock for LEFTBUS
> - GDR clock for RIGHTBUS
> - SCLK_MFC clock for MFC
>
> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/exynos3250.dtsi | 160 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 160 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
> index 7214c5e42150..46dee1951ec1 100644
> --- a/arch/arm/boot/dts/exynos3250.dtsi
> +++ b/arch/arm/boot/dts/exynos3250.dtsi
> @@ -721,6 +721,166 @@
> opp-microvolt = <875000>;
> };
> };
> +
> + bus_leftbus: bus_leftbus {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_DIV_GDL>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_leftbus_opp_table>;
> + status = "disabled";
> + };
> +
> + bus_rightbus: bus_rightbus {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_DIV_GDR>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_leftbus_opp_table>;
> + status = "disabled";
> + };
> +
> + bus_lcd0: bus_lcd0 {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_DIV_ACLK_160>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_leftbus_opp_table>;
> + status = "disabled";
> + };
> +
> + bus_fsys: bus_fsys {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_DIV_ACLK_200>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_leftbus_opp_table>;
> + status = "disabled";
> + };
> +
> + bus_mcuisp: bus_mcuisp {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_mcuisp_opp_table>;
> + status = "disabled";
> + };
> +
> + bus_isp: bus_isp {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_DIV_ACLK_266>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_isp_opp_table>;
> + status = "disabled";
> + };
> +
> + bus_peril: bus_peril {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_DIV_ACLK_100>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_peril_opp_table>;
> + status = "disabled";
> + };
> +
> + bus_mfc: bus_mfc {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_SCLK_MFC>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_leftbus_opp_table>;
> + status = "disabled";
> + };
> +
> + bus_leftbus_opp_table: opp_table2 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp00 {
> + opp-hz = /bits/ 64 <50000000>;
> + opp-microvolt = <900000>;
> + };
> + opp01 {
> + opp-hz = /bits/ 64 <80000000>;
> + opp-microvolt = <900000>;
> + };
> + opp02 {
> + opp-hz = /bits/ 64 <100000000>;
> + opp-microvolt = <1000000>;
> + };
> + opp03 {
> + opp-hz = /bits/ 64 <134000000>;
> + opp-microvolt = <1000000>;
> + };
> + opp04 {
> + opp-hz = /bits/ 64 <200000000>;
> + opp-microvolt = <1000000>;
> + };
> + };
> +
> + bus_mcuisp_opp_table: opp_table3 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp00 {
> + opp-hz = /bits/ 64 <50000000>;
> + opp-microvolt = <900000>;
The voltages for all these INT-block tables have exactly the same value
which of course makes sense because this is the same regulator. However
the opp-microvolt property is an optional property. Do you have to
provide it in each OPP?
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
