On Tue, Dec 08, 2015 at 02:32:03PM +0000, Lee Jones wrote:
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> .../devicetree/bindings/cpufreq/cpufreq-st.txt | 91 ++++++++++++++++++++++
> 1 file changed, 91 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt
>
> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt
> new file mode 100644
> index 0000000..d91a02a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt
> @@ -0,0 +1,91 @@
> +Binding for ST's CPUFreq driver
> +===============================
> +
> +ST's CPUFreq driver attempts to read 'process' and 'version' attributes
> +from the SoC, then supplies the OPP framework with 'prop' and 'supported
> +hardware' information respectively. The framework is then able to read
> +the DT and operate in the usual way.
> +
> +For more information about the expected DT format [See: ../opp/opp.txt].
> +
> +Frequency Scaling only
> +----------------------
> +
> +No vendor specific driver required for this.
> +
> +Located in CPU's node:
> +
> +- operating-points : [See: ../power/opp.txt]
> +
> +Example [safe]
> +--------------
> +
> +cpus {
> + cpu@0 {
> + /* kHz uV */
> + operating-points = <1500000 0
> + 1200000 0
> + 800000 0
> + 500000 0>;
> + };
> +};
> +
> +Dynamic Voltage and Frequency Scaling (DVFS)
> +--------------------------------------------
> +
> +This requires the ST CPUFreq driver to supply 'process' and 'version' info.
> +
> +Located in CPU's node:
> +
> +- operating-points-v2 : [See ../power/opp.txt]
> +
> +Example [unsafe]
> +----------------
> +
> +cpus {
> + cpu@0 {
> + operating-points-v2 = <&cpu0_opp_table>;
> + };
> +};
> +
> +cpu0_opp_table: opp_table {
> + compatible = "operating-points-v2";
> +
> + /* ############################################################### */
> + /* # WARNING: Do not attempt to copy/replicate these nodes, # */
> + /* # they are only to be supplied by the bootloader !!! # */
> + /* ############################################################### */
> + opp0 {
> + /* Major Minor Substrate */
> + /* 2 all all */
> + opp-supported-hw = <0x00000004 0xffffffff 0xffffffff>;
> + opp-hz = /bits/ 64 <1500000000>;
> + clock-latency-ns = <10000000>;
> +
> + opp-microvolt-pcode0 = <1200000>;
> + opp-microvolt-pcode1 = <1200000>;
> + opp-microvolt-pcode2 = <1200000>;
> + opp-microvolt-pcode3 = <1200000>;
> + opp-microvolt-pcode4 = <1170000>;
> + opp-microvolt-pcode5 = <1140000>;
> + opp-microvolt-pcode6 = <1100000>;
> + opp-microvolt-pcode7 = <1070000>;
> + };
> +
> + opp1 {
> + /* Major Minor Substrate */
> + /* all all all */
> + opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
> + opp-hz = /bits/ 64 <1200000000>;
> + clock-latency-ns = <10000000>;
> +
> + opp-microvolt-pcode0 = <1110000>;
> + opp-microvolt-pcode1 = <1150000>;
> + opp-microvolt-pcode2 = <1100000>;
> + opp-microvolt-pcode3 = <1080000>;
> + opp-microvolt-pcode4 = <1040000>;
> + opp-microvolt-pcode5 = <1020000>;
> + opp-microvolt-pcode6 = <980000>;
> + opp-microvolt-pcode7 = <930000>;
> + };
> +};
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
