Re: [PATCH v10 05/17] dt-bindings: add document for analogix display port driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, Dec 07, 2015 at 02:39:07PM +0800, Yakir Yang wrote:
> Analogix dp driver is split from exynos dp driver, so we just
> make an copy of exynos_dp.txt, and then simplify exynos_dp.txt
> 
> Beside update some exynos dtsi file with the latest change
> according to the devicetree binding documents.
> 
> Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
> Tested-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>

Acked-by: Rob Herring <robh@xxxxxxxxxx>

> ---
> Changes in v10: None
> Changes in v9: None
> Changes in v8:
> - Correct the right document path of display-timing.txt (Heiko)
> - Correct the misspell of 'from' to 'frm'. (Heiko)
> 
> Changes in v7: None
> Changes in v6: None
> Changes in v5: None
> Changes in v4:
> - Split all DTS changes, and provide backward compatibility. Mark old
>   properties as deprecated but still support them. (Krzysztof)
> - Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob)
> - Deprecated some properties which could parsed from Edid/Mode/DPCD. (Thierry)
>     "analogix,color-space" & "analogix,color-depth"   &
>     "analogix,link-rate"   & "analogix,lane-count"    &
>     "analogix,ycbcr-coeff" & "analogix,dynamic-range" &
>     "vsync-active-high"    & "hsync-active-high"      & "interlaces"
> 
> Changes in v3:
> - Add devicetree binding documents. (Heiko)
> - Remove sync pol & colorimetry properies from the new analogix dp driver
>   devicetree binding. (Thierry)
> - Update the exist exynos dtsi file with the latest DP DT properies.
> 
> Changes in v2: None
> 
>  .../bindings/display/bridge/analogix_dp.txt        | 50 +++++++++++++++++
>  .../bindings/display/exynos/exynos_dp.txt          | 65 ++++++++--------------
>  2 files changed, 72 insertions(+), 43 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> new file mode 100644
> index 0000000..7659a7a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> @@ -0,0 +1,50 @@
> +Analogix Display Port bridge bindings
> +
> +Required properties for dp-controller:
> +	-compatible:
> +		platform specific such as:
> +		 * "samsung,exynos5-dp"
> +		 * "rockchip,rk3288-dp"
> +	-reg:
> +		physical base address of the controller and length
> +		of memory mapped region.
> +	-interrupts:
> +		interrupt combiner values.
> +	-clocks:
> +		from common clock binding: handle to dp clock.
> +	-clock-names:
> +		from common clock binding: Shall be "dp".
> +	-interrupt-parent:
> +		phandle to Interrupt combiner node.
> +	-phys:
> +		from general PHY binding: the phandle for the PHY device.
> +	-phy-names:
> +		from general PHY binding: Should be "dp".
> +
> +Optional properties for dp-controller:
> +	-hpd-gpios:
> +		Hotplug detect GPIO.
> +		Indicates which GPIO should be used for hotplug detection
> +	-port@[X]: SoC specific port nodes with endpoint definitions as defined
> +		in Documentation/devicetree/bindings/media/video-interfaces.txt,
> +		please refer to the SoC specific binding document:
> +		* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
> +		* Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
> +
> +
> +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> +-------------------------------------------------------------------------------
> +
> +Example:
> +
> +	dp-controller {
> +		compatible = "samsung,exynos5-dp";
> +		reg = <0x145b0000 0x10000>;
> +		interrupts = <10 3>;
> +		interrupt-parent = <&combiner>;
> +		clocks = <&clock 342>;
> +		clock-names = "dp";
> +
> +		phys = <&dp_phy>;
> +		phy-names = "dp";
> +	};
> diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
> index 64693f2..9905081 100644
> --- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
> +++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
> @@ -31,45 +31,31 @@ Required properties for dp-controller:
>  		from general PHY binding: the phandle for the PHY device.
>  	-phy-names:
>  		from general PHY binding: Should be "dp".
> -	-samsung,color-space:
> -		input video data format.
> -			COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
> -	-samsung,dynamic-range:
> -		dynamic range for input video data.
> -			VESA = 0, CEA = 1
> -	-samsung,ycbcr-coeff:
> -		YCbCr co-efficients for input video.
> -			COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
> -	-samsung,color-depth:
> -		number of bits per colour component.
> -			COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
> -	-samsung,link-rate:
> -		link rate supported by the panel.
> -			LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
> -	-samsung,lane-count:
> -		number of lanes supported by the panel.
> -			LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
> -	- display-timings: timings for the connected panel as described by
> -		Documentation/devicetree/bindings/display/display-timing.txt
>  
>  Optional properties for dp-controller:
> -	-interlaced:
> -		interlace scan mode.
> -			Progressive if defined, Interlaced if not defined
> -	-vsync-active-high:
> -		VSYNC polarity configuration.
> -			High if defined, Low if not defined
> -	-hsync-active-high:
> -		HSYNC polarity configuration.
> -			High if defined, Low if not defined
> -	-samsung,hpd-gpio:
> -		Hotplug detect GPIO.
> -			Indicates which GPIO should be used for hotplug
> -			detection
> -	-video interfaces: Device node can contain video interface port
> -			    nodes according to [1].
> +	- display-timings: timings for the connected panel as described by
> +		Documentation/devicetree/bindings/display/panel/display-timing.txt
> +
> +For the below properties, please refer to Analogix DP binding document:
> + * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> +	-phys (required)
> +	-phy-names (required)
> +	-hpd-gpios (optional)
> +	-video interfaces (optional)
>  
> -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> +Deprecated properties for DisplayPort:
> +-interlaced:            deprecated prop that can parsed from drm_display_mode.
> +-vsync-active-high:     deprecated prop that can parsed from drm_display_mode.
> +-hsync-active-high:     deprecated prop that can parsed from drm_display_mode.
> +-samsung,ycbcr-coeff:   deprecated prop that can parsed from drm_display_mode.
> +-samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode.
> +-samsung,color-space:   deprecated prop that can parsed from drm_display_info.
> +-samsung,color-depth:   deprecated prop that can parsed from drm_display_info.
> +-samsung,link-rate:     deprecated prop that can reading from monitor by dpcd method.
> +-samsung,lane-count:    deprecated prop that can reading from monitor by dpcd method.
> +-samsung,hpd-gpio:      deprecated name for hpd-gpios.
> +
> +-------------------------------------------------------------------------------
>  
>  Example:
>  
> @@ -88,13 +74,6 @@ SOC specific portion:
>  
>  Board Specific portion:
>  	dp-controller {
> -		samsung,color-space = <0>;
> -		samsung,dynamic-range = <0>;
> -		samsung,ycbcr-coeff = <0>;
> -		samsung,color-depth = <1>;
> -		samsung,link-rate = <0x0a>;
> -		samsung,lane-count = <4>;
> -
>  		display-timings {
>  			native-mode = <&lcd_timing>;
>  			lcd_timing: 1366x768 {
> -- 
> 1.9.1
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux