Re: [PATCH 2/3] doc: dt-binding: generic onboard USB HUB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Dec 08, 2015 at 12:30:59AM -0200, Fabio Estevam wrote:
> On Mon, Dec 7, 2015 at 11:37 PM, Peter Chen <peter.chen@xxxxxxxxxxxxx> wrote:
> > Add dt-binding documentation for generic onboard USB HUB.
> >
> > Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
> > ---
> >  .../bindings/usb/generic-onboard-hub.txt           | 28 ++++++++++++++++++++++
> >  1 file changed, 28 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/usb/generic-onboard-hub.txt
> >
> > diff --git a/Documentation/devicetree/bindings/usb/generic-onboard-hub.txt b/Documentation/devicetree/bindings/usb/generic-onboard-hub.txt
> > new file mode 100644
> > index 0000000..ea92205
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/generic-onboard-hub.txt
> > @@ -0,0 +1,28 @@
> > +Generic Onboard USB HUB
> > +
> > +Required properties:
> > +- compatible: should be "generic-onboard-hub"
> > +
> > +Optional properties:
> > +- clocks: the input clock for HUB.
> > +
> > +- clock-names: Should be "external_clk"
> > +
> > +- hub-reset-gpios: Should specify the GPIO for reset.
> > +
> > +- hub-reset-active-high: the active reset signal is high, if this property is
> > +  not set, the active reset signal is low.
> > +
> > +- hub-reset-duration-us: the duration for assert reset signal, the time unit
> > +  is microsecond.
> > +
> > +Example:
> > +
> > +       usb_hub1 {
> > +               compatible = "generic-onboard-hub";
> > +               clocks = <&clks IMX6QDL_CLK_CKO>;
> > +               clock-names = "external_clk";
> > +               hub-reset-gpios = <&gpio7 12 0>;
> > +               hub-reset-active-high;
> 
> I think you could drop the 'hub-reset-active-high' property and do
> like this instead:
> 
> hub-reset-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
> 
> or
> 
> hub-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;

Yes, you are right, would you have a test to see if can work for
udoo board?

-- 

Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux