Re: [PATCH v9 2/8] ARM: dt: Binding documentation for imx25 GCQ

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Sun, Dec 06, 2015 at 08:52:15PM +0100, Markus Pargmann wrote:
> The documentation describes the bindings for the imx25 GCQ unit which is
> essentially a generic conversion queue using the imx25 ADC.
> 
> Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>

Acked-by: Rob Herring <robh@xxxxxxxxxx>

> ---
> 
> Notes:
>     Changes in v9:
>      - Added the dt-bindings header to this patch instead of the driver
>     
>     Changes in v6:
>      - Changed bindings to use adc-refp and adc-refn. Also a bit of cleanup in the
>        setup routine.
>     
>     Changes in v5:
>      - Fixed locking
>      - Removed module owner
> 
>  .../devicetree/bindings/iio/adc/fsl,imx25-gcq.txt  | 58 ++++++++++++++++++++++
>  include/dt-bindings/iio/adc/fsl-imx25-gcq.h        | 18 +++++++
>  2 files changed, 76 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
>  create mode 100644 include/dt-bindings/iio/adc/fsl-imx25-gcq.h
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
> new file mode 100644
> index 000000000000..b0866d36a307
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
> @@ -0,0 +1,58 @@
> +Freescale i.MX25 ADC GCQ device
> +
> +This is a generic conversion queue device that can convert any of the
> +analog inputs using the ADC unit of the i.MX25.
> +
> +Required properties:
> + - compatible: Should be "fsl,imx25-gcq".
> + - reg: Should be the register range of the module.
> + - interrupts: Should be the interrupt number of the module.
> +   Typically this is <1>.
> + - interrupt-parent: phandle to the tsadc module of the i.MX25.
> + - #address-cells: Should be <1> (setting for the subnodes)
> + - #size-cells: Should be <0> (setting for the subnodes)
> +
> +Optional properties:
> + - vref-ext-supply: The regulator supplying the ADC reference voltage.
> +   Required when at least one subnode uses the this reference.
> + - vref-xp-supply: The regulator supplying the ADC reference voltage on pin XP.
> +   Required when at least one subnode uses this reference.
> + - vref-yp-supply: The regulator supplying the ADC reference voltage on pin YP.
> +   Required when at least one subnode uses this reference.
> +
> +Sub-nodes:
> +Optionally you can define subnodes which define the reference voltage
> +for the analog inputs.
> +
> +Required properties for subnodes:
> + - reg: Should be the number of the analog input.
> +     0: xp
> +     1: yp
> +     2: xn
> +     3: yn
> +     4: wiper
> +     5: inaux0
> +     6: inaux1
> +     7: inaux2
> +Optional properties for subnodes:
> + - fsl,adc-refp: specifies the positive reference input as defined in
> +     <dt-bindings/iio/adc/fsl-imx25-gcq.h>
> + - fsl,adc-refn: specifies the negative reference input as defined in
> +     <dt-bindings/iio/adc/fsl-imx25-gcq.h>
> +
> +Example:
> +
> +	adc: adc@50030800 {
> +		compatible = "fsl,imx25-gcq";
> +		reg = <0x50030800 0x60>;
> +		interrupt-parent = <&tscadc>;
> +		interrupts = <1>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		inaux@5 {
> +			reg = <5>;
> +			fsl,adc-refp = <MX25_ADC_REFP_INT>;
> +			fsl,adc-refn = <MX25_ADC_REFN_NGND>;
> +		};
> +	};
> diff --git a/include/dt-bindings/iio/adc/fsl-imx25-gcq.h b/include/dt-bindings/iio/adc/fsl-imx25-gcq.h
> new file mode 100644
> index 000000000000..87abdd4a7674
> --- /dev/null
> +++ b/include/dt-bindings/iio/adc/fsl-imx25-gcq.h
> @@ -0,0 +1,18 @@
> +/*
> + * This header provides constants for configuring the I.MX25 ADC
> + */
> +
> +#ifndef _DT_BINDINGS_IIO_ADC_FS_IMX25_GCQ_H
> +#define _DT_BINDINGS_IIO_ADC_FS_IMX25_GCQ_H
> +
> +#define MX25_ADC_REFP_YP	0 /* YP voltage reference */
> +#define MX25_ADC_REFP_XP	1 /* XP voltage reference */
> +#define MX25_ADC_REFP_EXT	2 /* External voltage reference */
> +#define MX25_ADC_REFP_INT	3 /* Internal voltage reference */
> +
> +#define MX25_ADC_REFN_XN	0 /* XN ground reference */
> +#define MX25_ADC_REFN_YN	1 /* YN ground reference */
> +#define MX25_ADC_REFN_NGND	2 /* Internal ground reference */
> +#define MX25_ADC_REFN_NGND2	3 /* External ground reference */
> +
> +#endif
> -- 
> 2.6.2
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux