On Sat, Dec 05, 2015 at 06:53:41AM -0500, Kapil Hali wrote:
> These changes cleans up SMP implementaion for Broadcom's
> Kona SoC which are required for handling SMP for iProc
> family of SoCs at a single place for BCM NSP and BCM Kona.
>
> Signed-off-by: Kapil Hali <kapilh@xxxxxxxxxxxx>
> ---
> .../bindings/arm/bcm/brcm,bcm11351-cpu-method.txt | 12 ++--
> arch/arm/boot/dts/bcm11351.dtsi | 4 +-
> arch/arm/boot/dts/bcm21664.dtsi | 4 +-
For the bindings:
Acked-by: Rob Herring <robh@xxxxxxxxxx>
> arch/arm/mach-bcm/kona_smp.c | 82 ++++++++++++++--------
> 4 files changed, 64 insertions(+), 38 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
> index 8240c02..3c5fe4b 100644
> --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
> +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
> @@ -1,17 +1,17 @@
> Broadcom Kona Family CPU Enable Method
> --------------------------------------
> This binding defines the enable method used for starting secondary
> -CPUs in the following Broadcom SoCs:
> +CPU in the following Broadcom SoCs:
> BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
>
> The enable method is specified by defining the following required
> -properties in the "cpus" device tree node:
> +properties in the corresponding secondary "cpu" device tree node:
> - enable-method = "brcm,bcm11351-cpu-method";
> - secondary-boot-reg = <...>;
>
> The secondary-boot-reg property is a u32 value that specifies the
> -physical address of the register used to request the ROM holding pen
> -code release a secondary CPU. The value written to the register is
> +physical address of the register used to request the ROM code
> +release a secondary CPU. The value written to the register is
> formed by encoding the target CPU id into the low bits of the
> physical start address it should jump to.
>
> @@ -19,8 +19,6 @@ Example:
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> - enable-method = "brcm,bcm11351-cpu-method";
> - secondary-boot-reg = <0x3500417c>;
>
> cpu0: cpu@0 {
> device_type = "cpu";
> @@ -31,6 +29,8 @@ Example:
> cpu1: cpu@1 {
> device_type = "cpu";
> compatible = "arm,cortex-a9";
> + enable-method = "brcm,bcm11351-cpu-method";
> + secondary-boot-reg = <0x3500417c>;
> reg = <1>;
> };
> };
> diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
> index 2ddaa51..18045c3 100644
> --- a/arch/arm/boot/dts/bcm11351.dtsi
> +++ b/arch/arm/boot/dts/bcm11351.dtsi
> @@ -30,8 +30,6 @@
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> - enable-method = "brcm,bcm11351-cpu-method";
> - secondary-boot-reg = <0x3500417c>;
>
> cpu0: cpu@0 {
> device_type = "cpu";
> @@ -42,6 +40,8 @@
> cpu1: cpu@1 {
> device_type = "cpu";
> compatible = "arm,cortex-a9";
> + enable-method = "brcm,bcm11351-cpu-method";
> + secondary-boot-reg = <0x3500417c>;
> reg = <1>;
> };
> };
> diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
> index 2016b72..6dde95f 100644
> --- a/arch/arm/boot/dts/bcm21664.dtsi
> +++ b/arch/arm/boot/dts/bcm21664.dtsi
> @@ -30,8 +30,6 @@
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> - enable-method = "brcm,bcm11351-cpu-method";
> - secondary-boot-reg = <0x35004178>;
>
> cpu0: cpu@0 {
> device_type = "cpu";
> @@ -42,6 +40,8 @@
> cpu1: cpu@1 {
> device_type = "cpu";
> compatible = "arm,cortex-a9";
> + enable-method = "brcm,bcm11351-cpu-method";
> + secondary-boot-reg = <0x35004178>;
> reg = <1>;
> };
> };
> diff --git a/arch/arm/mach-bcm/kona_smp.c b/arch/arm/mach-bcm/kona_smp.c
> index 66a0465..15af781 100644
> --- a/arch/arm/mach-bcm/kona_smp.c
> +++ b/arch/arm/mach-bcm/kona_smp.c
> @@ -1,5 +1,5 @@
> /*
> - * Copyright (C) 2014 Broadcom Corporation
> + * Copyright (C) 2014-2015 Broadcom Corporation
> * Copyright 2014 Linaro Limited
> *
> * This program is free software; you can redistribute it and/or
> @@ -30,9 +30,10 @@
>
> /* Name of device node property defining secondary boot register location */
> #define OF_SECONDARY_BOOT "secondary-boot-reg"
> +#define MPIDR_CPUID_BITMASK 0x3
>
> /* I/O address of register used to coordinate secondary core startup */
> -static u32 secondary_boot;
> +static u32 secondary_boot_addr;
>
> /*
> * Enable the Cortex A9 Snoop Control Unit
> @@ -78,44 +79,68 @@ static int __init scu_a9_enable(void)
> static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
> {
> static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
> - struct device_node *node;
> + struct device_node *cpus_node = NULL;
> + struct device_node *cpu_node = NULL;
> int ret;
>
> - BUG_ON(secondary_boot); /* We're called only once */
> -
> /*
> * This function is only called via smp_ops->smp_prepare_cpu().
> * That only happens if a "/cpus" device tree node exists
> * and has an "enable-method" property that selects the SMP
> * operations defined herein.
> */
> - node = of_find_node_by_path("/cpus");
> - BUG_ON(!node);
> -
> - /*
> - * Our secondary enable method requires a "secondary-boot-reg"
> - * property to specify a register address used to request the
> - * ROM code boot a secondary code. If we have any trouble
> - * getting this we fall back to uniprocessor mode.
> - */
> - if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) {
> - pr_err("%s: missing/invalid " OF_SECONDARY_BOOT " property\n",
> - node->name);
> - ret = -ENOENT; /* Arrange to disable SMP */
> - goto out;
> + cpus_node = of_find_node_by_path("/cpus");
> + if (!cpus_node)
> + return;
> +
> + for_each_child_of_node(cpus_node, cpu_node) {
> + u32 cpuid;
> +
> + if (of_node_cmp(cpu_node->type, "cpu"))
> + continue;
> +
> + if (of_property_read_u32(cpu_node, "reg", &cpuid)) {
> + pr_debug("%s: missing reg property\n",
> + cpu_node->full_name);
> + ret = -ENOENT;
> + goto out;
> + }
> +
> + /*
> + * "secondary-boot-reg" property should be defined only
> + * for secondary cpu
> + */
> + if ((cpuid & MPIDR_CPUID_BITMASK) == 1) {
> + /*
> + * Our secondary enable method requires a
> + * "secondary-boot-reg" property to specify a register
> + * address used to request the ROM code boot a secondary
> + * core. If we have any trouble getting this we fall
> + * back to uniprocessor mode.
> + */
> + if (of_property_read_u32(cpu_node,
> + OF_SECONDARY_BOOT,
> + &secondary_boot_addr)) {
> + pr_warn("%s: no" OF_SECONDARY_BOOT "property\n",
> + cpu_node->name);
> + ret = -ENOENT;
> + goto out;
> + }
> + }
> }
>
> /*
> - * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
> + * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
> * returned, the SoC reported a uniprocessor configuration.
> * We bail on any other error.
> */
> ret = scu_a9_enable();
> out:
> - of_node_put(node);
> + of_node_put(cpu_node);
> + of_node_put(cpus_node);
> +
> if (ret) {
> /* Update the CPU present map to reflect uniprocessor mode */
> - BUG_ON(ret != -ENOENT);
> pr_warn("disabling SMP\n");
> init_cpu_present(&only_cpu_0);
> }
> @@ -139,7 +164,7 @@ out:
> * - Wait for the secondary boot register to be re-written, which
> * indicates the secondary core has started.
> */
> -static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
> +static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
> {
> void __iomem *boot_reg;
> phys_addr_t boot_func;
> @@ -154,15 +179,16 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
> return -EINVAL;
> }
>
> - if (!secondary_boot) {
> + if (!secondary_boot_addr) {
> pr_err("required secondary boot register not specified\n");
> return -EINVAL;
> }
>
> - boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32));
> + boot_reg = ioremap_nocache(
> + (phys_addr_t)secondary_boot_addr, sizeof(u32));
> if (!boot_reg) {
> pr_err("unable to map boot register for cpu %u\n", cpu_id);
> - return -ENOSYS;
> + return -ENOMEM;
> }
>
> /*
> @@ -191,12 +217,12 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
>
> pr_err("timeout waiting for cpu %u to start\n", cpu_id);
>
> - return -ENOSYS;
> + return -ENXIO;
> }
>
> static struct smp_operations bcm_smp_ops __initdata = {
> .smp_prepare_cpus = bcm_smp_prepare_cpus,
> - .smp_boot_secondary = bcm_boot_secondary,
> + .smp_boot_secondary = kona_boot_secondary,
> };
> CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
> &bcm_smp_ops);
> --
> 2.1.0
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
