On Thu, Dec 03, 2015 at 08:55:52AM -0600, Rob Herring wrote: > On Tue, Dec 01, 2015 at 02:48:19PM +0100, Steffen Trumtrar wrote: > > Add the binding documentation for the Epson RX6110 RTC. > > > > Signed-off-by: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx> > > --- > > Changes since v1: > > - added i2c binding > > - compatible: "epson,rtc-rx6110" -> "epson,rx6110" > > - fixed typo > > > > .../devicetree/bindings/rtc/epson,rx6110.txt | 39 ++++++++++++++++++++++ > > 1 file changed, 39 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/rtc/epson,rx6110.txt > > > > diff --git a/Documentation/devicetree/bindings/rtc/epson,rx6110.txt b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt > > new file mode 100644 > > index 000000000000..8c3d06f117e8 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt > > @@ -0,0 +1,39 @@ > > +Epson RX6110 Real Time Clock > > +============================ > > + > > +The Epson RX6110 can be used with SPI or I2C busses. The kind of > > +bus depends on the SPISEL pin and can not be configured via software. > > + > > +I2C mode > > +-------- > > + > > +Required properties: > > + - compatible: should be: "epson,rx6110" > > + - reg : offset and length of the register set for the device > > For i2c, there is no size cell. Otherwise, Okay. I removed it from the binding documentation. > > Acked-by: Rob Herring <robh@xxxxxxxxxx> > Thanks, Steffen Trumtrar -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
