The change adds COMMON_CLK_NXP configuration symbol and enables it for NXP LPC18XX architecture, this is needed to reuse drivers/clk/nxp folder for NXP common clock framework drivers other than LPC18XX one. Signed-off-by: Vladimir Zapolskiy <vz@xxxxxxxxx> Acked-by: Joachim Eastwood <manabian@xxxxxxxxx> --- Changes from v1 to v2: - removed explicit COMMON_CLK selection for NXP LPC18xx drivers/clk/Kconfig | 5 +++++ drivers/clk/Makefile | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index c3e3a02..7fc1eb9 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -175,6 +175,11 @@ config COMMON_CLK_PWM Adapter driver so that any PWM output can be (mis)used as clock signal at 50% duty cycle. +config COMMON_CLK_NXP + def_bool COMMON_CLK && ARCH_LPC18XX + ---help--- + Support for clock providers on NXP platforms. + config COMMON_CLK_PXA def_bool COMMON_CLK && ARCH_PXA ---help--- diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 820714c..15603c1 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -62,8 +62,8 @@ endif obj-$(CONFIG_PLAT_ORION) += mvebu/ obj-$(CONFIG_ARCH_MESON) += meson/ obj-$(CONFIG_ARCH_MXS) += mxs/ -obj-$(CONFIG_ARCH_LPC18XX) += nxp/ obj-$(CONFIG_MACH_PISTACHIO) += pistachio/ +obj-$(CONFIG_COMMON_CLK_NXP) += nxp/ obj-$(CONFIG_COMMON_CLK_PXA) += pxa/ obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html