On 12/05/2015 11:38 AM, Jonathan Cameron wrote:
On 02/12/15 19:57, Andrew F. Davis wrote:
Add the TI afe4404 heart monitor DT bindings documentation.
Create health directory created under iio.
Signed-off-by: Andrew F. Davis <afd@xxxxxx>
One little point inline - otherwise this is straightforward and
looks good to me.
Could add cross references to the interrupt and gpio docs.
Will add.
Jonathan
---
.../devicetree/bindings/iio/health/afe4404.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/health/afe4404.txt
diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt
new file mode 100644
index 0000000..25b77a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt
@@ -0,0 +1,27 @@
+* Texas Instruments AFE4404 Heart rate and Pulse Oximeter
+
+Required properties:
+ - compatible : Should be "ti,afe4404".
+ - reg : I2C address of the device.
+ - tx_sup-supply : Regulator supply to LEDs.
If the sup bit is for supply I'd drop it and just have
tx-supply.
It is, the name of the pin in the datasheet is "tx_sup", so
I went with that.
+ - interrupt-parent : Phandle to he parent interrupt controller.
+ - interrupts : The interrupt line the device ADC_RDY pin is connected to.
+
+Optional properties:
+ - reset-gpios : GPIO used to reset the device.
+
+Example:
+
+&i2c2 {
+ heart_mon@58 {
+ compatible = "ti,afe4404";
+ reg = <0x58>;
+
+ tx_sup-supply = <&vbat>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+
+ reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ };
+};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
