This is a series to replace Alexander Aring's power domains submission. It uses a new firmware interface to add support for the other power domains in the system, which I needed for the 3D support, while still supporting the USB domain on older firmwares. It also drops the static declarations, so that the driver instance is entirely contained inside of the device. Alexander Aring (4): power: domain: add pm_genpd_exit ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT. Eric Anholt (1): ARM: bcm2835: Define two new packets from the latest firmware. .../bindings/arm/bcm/raspberrypi,bcm2835-power.txt | 47 ++++ arch/arm/boot/dts/bcm2835-rpi.dtsi | 11 + arch/arm/boot/dts/bcm2835.dtsi | 2 +- arch/arm/mach-bcm/Kconfig | 10 + arch/arm/mach-bcm/Makefile | 1 + arch/arm/mach-bcm/raspberrypi-power.c | 269 +++++++++++++++++++++ drivers/base/power/domain.c | 22 ++ include/dt-bindings/arm/raspberrypi-power.h | 41 ++++ include/linux/pm_domain.h | 4 + include/soc/bcm2835/raspberrypi-firmware.h | 2 + 10 files changed, 408 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt create mode 100644 arch/arm/mach-bcm/raspberrypi-power.c create mode 100644 include/dt-bindings/arm/raspberrypi-power.h -- 2.6.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
