[PATCH 3/3] ARM: dts: Addition of binding for gpio switches on peach-pi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




The peach pi has a GPIO connected to the firmware write protect, developer
mode and recovery mode lines (which are primarily controlled via external
switches on developer test board). This patch adds the required nodes to
the device tree to configure the pinmuxing and allow these to be read from
user space.

Signed-off-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/exynos5800-peach-pi.dts | 46 +++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 49a4f43..2937372 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -53,6 +53,31 @@
 		};
 	};
 
+	gpio-switch {
+		compatible = "gpio-switch";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wp_gpio &dev_mode &rec_mode>;
+
+		write-protect {
+			label = "write-protect";
+			gpios = <&gpx3 0 GPIO_ACTIVE_LOW>;
+			read-only;
+		};
+
+		developer-switch {
+			label = "developer-switch";
+			gpios = <&gpx1 3 GPIO_ACTIVE_HIGH>;
+			read-only;
+		};
+
+		recovery-switch {
+			label = "recovery-switch";
+			gpios = <&gpx0 7 GPIO_ACTIVE_LOW>;
+			read-only;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -731,6 +756,13 @@
 		samsung,pin-val = <0>;
 	};
 
+	rec_mode: rec-mode {
+		samsung,pins = "gpx0-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	tpm_irq: tpm-irq {
 		samsung,pins = "gpx1-0";
 		samsung,pin-function = <0>;
@@ -752,6 +784,13 @@
 		samsung,pin-drv = <0>;
 	};
 
+	dev_mode: dev-mode {
+		samsung,pins = "gpx1-3";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
 	ec_irq: ec-irq {
 		samsung,pins = "gpx1-5";
 		samsung,pin-function = <0>;
@@ -773,6 +812,13 @@
 		samsung,pin-drv = <0>;
 	};
 
+	wp_gpio: wp_gpio {
+		samsung,pins = "gpx3-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	max77802_irq: max77802-irq {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <0>;
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux