Provide ability to specify a fixed phy in the device tree and retain the mdio bus if no phy is found. This is needed where a dsa is connected via a fixed phy and uses the mdio bus for config. Fixed ptp ref clock calculatins for the stmmac when ptp ref clock is running at <= 50Mhz. Also add device tree setting to config ptp clk source on socfpga platforms. Phil Reid (5): stmmac: create of compatible mdio bus for stmacc driver stmmac: Correct documentation on stmmac clocks. stmmac: Fix calculations for ptp counters when clock input = 50Mhz. stmmac: Add ptp debugfs entry. stmmac: socfpga: Provide dt node to config ptp clk source. .../devicetree/bindings/net/socfpga-dwmac.txt | 2 + Documentation/devicetree/bindings/net/stmmac.txt | 27 +++++--- drivers/net/ethernet/stmicro/stmmac/common.h | 2 +- .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 10 +++ drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 + .../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 8 ++- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 79 +++++++++++++++++++--- drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 32 ++++++--- .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 +- drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h | 5 ++ 10 files changed, 134 insertions(+), 34 deletions(-) -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html