Add support for Advantech/GE B850v3 board. Signed-off-by: Akshay Bhat <akshay.bhat@xxxxxxxxxxx> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-b850v3.dts | 127 +++++++++++++++++++++++++++++++++++++ 2 files changed, 128 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-b850v3.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9cdff66..37d5b09 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -312,6 +312,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-arm2.dtb \ imx6q-b450v3.dtb \ imx6q-b650v3.dtb \ + imx6q-b850v3.dtb \ imx6q-cm-fx6.dtb \ imx6q-cubox-i.dtb \ imx6q-dfi-fs700-m60.dtb \ diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts new file mode 100644 index 0000000..652f237 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -0,0 +1,127 @@ +/* + * Copyright 2015 Timesys Corporation. + * Copyright 2015 General Electric Company + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include "imx6q-bx50v3.dtsi" + +/ { + model = "General Electric B850v3"; + compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q"; + + chosen { + stdout-path = &uart3; + }; + + panel_lvds0 { + compatible = "auo,b133htn01"; + backlight = <&backlight_lvds>; + ddc-i2c-bus = <&mux_i2c12>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&ldb { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + fsl,dual-channel; + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&i2c2 { + pca9547_ddc: mux@70 { + compatible = "nxp,pca9547"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + mux_i2c11: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + }; + + mux_i2c12: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + + mux_i2c13: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + + mux_i2c14: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + + mux_i2c15: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + + mux_i2c16: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + + mux_i2c17: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + + mux_i2c18: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + }; + }; +}; + +&hdmi { + ddc-i2c-bus = <&mux_i2c11>; +}; + +&mux_i2c3 { + ads7830_2: ads7830@4a { + compatible = "ti,ads7830"; + reg = <0x4a>; + }; +}; -- 2.6.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html