Re: [PATCH v4 2/5] DT: PCI: qcom: Document PCIe devicetree bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, Dec 03, 2015 at 03:35:21PM +0200, Stanimir Varbanov wrote:
> From: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
> 
> Document Qualcomm PCIe driver devicetree bindings.
> 
> Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>

Acked-by: Rob Herring <robh@xxxxxxxxxx>

> ---
>  .../devicetree/bindings/pci/qcom,pcie.txt          |  233 ++++++++++++++++++++
>  1 file changed, 233 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> new file mode 100644
> index 000000000000..6d71ee2e335d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> @@ -0,0 +1,233 @@
> +* Qualcomm PCI express root complex
> +
> +- compatible:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: Value should contain
> +			- "qcom,pcie-ipq8064" for ipq8064
> +			- "qcom,pcie-apq8064" for apq8064
> +			- "qcom,pcie-apq8084" for apq8084
> +
> +- reg:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: Register ranges as listed in the reg-names property
> +
> +- reg-names:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: Must include the following entries
> +			- "parf"   Qualcomm specific registers
> +			- "dbi"	   Designware PCIe registers
> +			- "elbi"   External local bus interface registers
> +			- "config" PCIe configuration space
> +
> +- device_type:
> +	Usage: required
> +	Value type: <string>
> +	Definition: Should be "pci". As specified in designware-pcie.txt
> +
> +- #address-cells:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: Should be set to 3. As specified in designware-pcie.txt
> +
> +- #size-cells:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: Should be set 2. As specified in designware-pcie.txt
> +
> +- ranges:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: As specified in designware-pcie.txt
> +
> +- interrupts:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: MSI interrupt
> +
> +- interrupt-names:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: Should contain "msi"
> +
> +- #interrupt-cells:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: Should be 1. As specified in designware-pcie.txt
> +
> +- interrupt-map-mask:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: As specified in designware-pcie.txt
> +
> +- interrupt-map:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: As specified in designware-pcie.txt
> +
> +- clocks:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: List of phandle and clock specifier pairs as listed
> +		    in clock-names property
> +
> +- clock-names:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: Should contain the following entries
> +			- "iface"	Configuration AHB clock
> +
> +- clock-names:
> +	Usage: required for ipq/apq8064
> +	Value type: <stringlist>
> +	Definition: Should contain the following entries
> +			- "core"	Clocks the pcie hw block
> +			- "phy"		Clocks the pcie PHY block
> +- clock-names:
> +	Usage: required for apq8084
> +	Value type: <stringlist>
> +	Definition: Should contain the following entries
> +			- "aux"		Auxiliary (AUX) clock
> +			- "bus_master"	Master AXI clock
> +			- "bus_slave"	Slave AXI clock
> +- resets:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: List of phandle and reset specifier pairs as listed
> +		    in reset-names property
> +
> +- reset-names:
> +	Usage: required for ipq/apq8064
> +	Value type: <stringlist>
> +	Definition: Should contain the following entries
> +			- "axi"  AXI reset
> +			- "ahb"  AHB reset
> +			- "por"  POR reset
> +			- "pci"  PCI reset
> +			- "phy"  PHY reset
> +
> +- reset-names:
> +	Usage: required for apq8084
> +	Value type: <stringlist>
> +	Definition: Should contain the following entries
> +			- "core" Core reset
> +
> +- power-domains:
> +	Usage: required for apq8084
> +	Value type: <prop-encoded-array>
> +	Definition: A phandle and power domain specifier pair to the
> +		    power domain which is responsible for collapsing
> +		    and restoring power to the peripheral
> +
> +- vdda-supply:
> +	Usage: required
> +	Value type: <phandle>
> +	Definition: A phandle to the core analog power supply
> +
> +- vdda_phy-supply:
> +	Usage: required for ipq/apq8064
> +	Value type: <phandle>
> +	Definition: A phandle to the analog power supply for PHY
> +
> +- vdda_refclk-supply:
> +	Usage: required for ipq/apq8064
> +	Value type: <phandle>
> +	Definition: A phandle to the analog power supply for IC which generates
> +		    reference clock
> +
> +- phys:
> +	Usage: required for apq8084
> +	Value type: <phandle>
> +	Definition: List of phandle(s) as listed in phy-names property
> +
> +- phy-names:
> +	Usage: required for apq8084
> +	Value type: <stringlist>
> +	Definition: Should contain "pciephy"
> +
> +- <name>-gpios:
> +	Usage: optional
> +	Value type: <prop-encoded-array>
> +	Definition: List of phandle and gpio specifier pairs. Should contain
> +			- "perst-gpios"	PCIe endpoint reset signal line
> +			- "wake-gpios"	PCIe endpoint wake signal line
> +
> +* Example for ipq/apq8064
> +	pcie@1b500000 {
> +		compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie";
> +		reg = <0x1b500000 0x1000
> +		       0x1b502000 0x80
> +		       0x1b600000 0x100
> +		       0x0ff00000 0x100000>;
> +		reg-names = "dbi", "elbi", "parf", "config";
> +		device_type = "pci";
> +		linux,pci-domain = <0>;
> +		bus-range = <0x00 0xff>;
> +		num-lanes = <1>;
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
> +			  0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
> +		interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
> +		interrupt-names = "msi";
> +		#interrupt-cells = <1>;
> +		interrupt-map-mask = <0 0 0 0x7>;
> +		interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> +				<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
> +				<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
> +				<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
> +		clocks = <&gcc PCIE_A_CLK>,
> +			 <&gcc PCIE_H_CLK>,
> +			 <&gcc PCIE_PHY_CLK>;
> +		clock-names = "core", "iface", "phy";
> +		resets = <&gcc PCIE_ACLK_RESET>,
> +			 <&gcc PCIE_HCLK_RESET>,
> +			 <&gcc PCIE_POR_RESET>,
> +			 <&gcc PCIE_PCI_RESET>,
> +			 <&gcc PCIE_PHY_RESET>;
> +		reset-names = "axi", "ahb", "por", "pci", "phy";
> +		pinctrl-0 = <&pcie_pins_default>;
> +		pinctrl-names = "default";
> +	};
> +
> +* Example for apq8084
> +	pcie0@fc520000 {
> +		compatible = "qcom,pcie-apq8084", "snps,dw-pcie";
> +		reg = <0xfc520000 0x2000>,
> +		      <0xff000000 0x1000>,
> +		      <0xff001000 0x1000>,
> +		      <0xff002000 0x2000>;
> +		reg-names = "parf", "dbi", "elbi", "config";
> +		device_type = "pci";
> +		linux,pci-domain = <0>;
> +		bus-range = <0x00 0xff>;
> +		num-lanes = <1>;
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		ranges = <0x81000000 0 0          0xff200000 0 0x00100000   /* I/O */
> +			  0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */
> +		interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
> +		interrupt-names = "msi";
> +		#interrupt-cells = <1>;
> +		interrupt-map-mask = <0 0 0 0x7>;
> +		interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> +				<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
> +				<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
> +				<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
> +		clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> +			 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
> +			 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
> +			 <&gcc GCC_PCIE_0_AUX_CLK>;
> +		clock-names = "iface", "master_bus", "slave_bus", "aux";
> +		resets = <&gcc GCC_PCIE_0_BCR>;
> +		reset-names = "core";
> +		power-domains = <&gcc PCIE0_GDSC>;
> +		vdda-supply = <&pma8084_l3>;
> +		phys = <&pciephy0>;
> +		phy-names = "pciephy";
> +		perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>;
> +		pinctrl-0 = <&pcie0_pins_default>;
> +		pinctrl-names = "default";
> +	};
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux