Adds support for querying the phy bus width from the generic phy subsystem. Configure UTMI bus width in GUSBCFG based on this value. Signed-off-by: Matt Porter <matt.porter@xxxxxxxxxx> --- drivers/usb/gadget/s3c-hsotg.c | 14 +++++++++++++- drivers/usb/gadget/s3c-hsotg.h | 1 + 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index f97978b..0be6242 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -139,6 +139,7 @@ struct s3c_hsotg_ep { * @regs: The memory area mapped for accessing registers. * @irq: The IRQ number we are using * @supplies: Definition of USB power supplies + * @phyif: PHY interface width * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. * @num_of_eps: Number of available EPs (excluding EP0) * @debug_root: root directrory for debugfs. @@ -167,6 +168,7 @@ struct s3c_hsotg { struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)]; + u32 phyif; unsigned int dedicated_fifos:1; unsigned char num_of_eps; @@ -2215,7 +2217,7 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) */ /* set the PLL on, remove the HNP/SRP and set the PHY */ - writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) | + writel(hsotg->phyif | GUSBCFG_TOutCal(7) | (0x5 << 10), hsotg->regs + GUSBCFG); s3c_hsotg_init_fifo(hsotg); @@ -3557,6 +3559,16 @@ static int s3c_hsotg_probe(struct platform_device *pdev) goto err_supplies; } + /* Set default UTMI width */ + hsotg->phyif = GUSBCFG_PHYIf16; + + /* + * If using the generic PHY framework, check if the PHY bus + * width is 8-bit and set the phyif appropriately. + */ + if (hsotg->gphy && (phy_get_bus_width(gphy) == 8)) + hsotg->phyif = GUSBCFG_PHYIf8; + /* usb phy enable */ s3c_hsotg_phy_enable(hsotg); diff --git a/drivers/usb/gadget/s3c-hsotg.h b/drivers/usb/gadget/s3c-hsotg.h index d650b12..85f549f 100644 --- a/drivers/usb/gadget/s3c-hsotg.h +++ b/drivers/usb/gadget/s3c-hsotg.h @@ -55,6 +55,7 @@ #define GUSBCFG_HNPCap (1 << 9) #define GUSBCFG_SRPCap (1 << 8) #define GUSBCFG_PHYIf16 (1 << 3) +#define GUSBCFG_PHYIf8 (0 << 3) #define GUSBCFG_TOutCal_MASK (0x7 << 0) #define GUSBCFG_TOutCal_SHIFT (0) #define GUSBCFG_TOutCal_LIMIT (0x7) -- 1.8.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html