Adds USB OTG/PHY and clock support to BCM281xx and enables UDC support on the bcm11351-brt and bcm28155-ap boards. Signed-off-by: Matt Porter <matt.porter@xxxxxxxxxx> Reviewed-by: Markus Mayer <markus.mayer@xxxxxxxxxx> Reviewed-by: Tim Kryger <tim.kryger@xxxxxxxxxx> --- arch/arm/boot/dts/bcm11351-brt.dts | 6 ++++++ arch/arm/boot/dts/bcm11351.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/bcm28155-ap.dts | 8 ++++++++ 3 files changed, 32 insertions(+) diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts index 9d36eb4..047c635 100644 --- a/arch/arm/boot/dts/bcm11351-brt.dts +++ b/arch/arm/boot/dts/bcm11351-brt.dts @@ -43,5 +43,11 @@ status = "okay"; }; + usbotg@3f120000 { + status = "okay"; + }; + usbphy@3f130000 { + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 0755f43..247f9fd 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -284,4 +284,22 @@ #clock-cells = <0>; }; }; + + usbotg: usbotg@3f120000 { + compatible = "snps,dwc2"; + reg = <0x3f120000 0x10000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usbphy: usbphy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index bc4e62c..8347d1b 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -62,4 +62,12 @@ max-frequency = <48000000>; status = "okay"; }; + + usbotg@3f120000 { + status = "okay"; + }; + + usbphy@3f130000 { + status = "okay"; + }; }; -- 1.8.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html