This series aims to add Advantech BA-16 module (iMX6 based) and GE board support. This series has been tested against linux-next tag next-20151127. Modifications: v3->v4: - Remove simple-bus for regulators as suggested by Lucas Stash - Use simple-panel instead of display-timings as suggested by Lucas Stash - Add epson RTC node - Reorder nodes alphabetically History: -------- [v1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-October/381872.html [v2]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-November/383276.html [v3]: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-November/384202.html Akshay Bhat (5): of: Add vendor prefix for Advantech Corporation of: Add vendor prefix for General Electric Company ARM: dts: imx: Add support for Advantech/GE B450v3 ARM: dts: imx: Add support for Advantech/GE B650v3 ARM: dts: imx: Add support for Advantech/GE B850v3 Justin Waters (2): ARM: dts: imx: Add Advantech BA-16 Qseven module ARM: dts: imx: Add support for Advantech/GE Bx50v3 .../devicetree/bindings/vendor-prefixes.txt | 2 + arch/arm/boot/dts/Makefile | 3 + arch/arm/boot/dts/imx6q-b450v3.dts | 84 +++ arch/arm/boot/dts/imx6q-b650v3.dts | 84 +++ arch/arm/boot/dts/imx6q-b850v3.dts | 127 +++++ arch/arm/boot/dts/imx6q-ba16.dtsi | 586 +++++++++++++++++++++ arch/arm/boot/dts/imx6q-bx50v3.dtsi | 207 ++++++++ 7 files changed, 1093 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-b450v3.dts create mode 100644 arch/arm/boot/dts/imx6q-b650v3.dts create mode 100644 arch/arm/boot/dts/imx6q-b850v3.dts create mode 100644 arch/arm/boot/dts/imx6q-ba16.dtsi create mode 100644 arch/arm/boot/dts/imx6q-bx50v3.dtsi -- 2.6.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html