From: Carlo Caione <carlo@xxxxxxxxxxxx> Extend the pinctrl binding documentation with the support for external GPIO interrupts. Signed-off-by: Carlo Caione <carlo@xxxxxxxxxxxx> Signed-off-by: Beniamino Galvani <b.galvani@xxxxxxxxx> --- Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt index 3f6a524..de669ce 100644 --- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt @@ -3,6 +3,12 @@ Required properties for the root node: - compatible: "amlogic,meson8-pinctrl" or "amlogic,meson8b-pinctrl" - reg: address and size of registers controlling irq functionality + - reg-names: should be "irq" + - interrupt-controller: marks the device node as an interrupt controller + - #interrupt-cells: should be 2. The first cell is the GPIO number. The + second cell is used to specify trigger type. + - amlogic,irqs-gpio: specifies the GPIO IRQ numbers on the GIC (GPIO_IRQ#) + - interrupt-parent: specifies the parent interrupt controller. === GPIO sub-nodes === @@ -46,7 +52,12 @@ pinctrl-bindings.txt pinctrl: pinctrl@c1109880 { compatible = "amlogic,meson8-pinctrl"; + reg-names = "irq"; reg = <0xc1109880 0x10>; + interrupt-parent = <&gic>; + amlogic,irqs-gpio = <64 65 66 67 68 69 70 71>; + interrupt-controller; + #interrupt-cells = <2>; #address-cells = <1>; #size-cells = <1>; ranges; -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html