Re: [PATCH v2 08/10] drm/hisilicon: Add dsi encoder driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 1 December 2015 at 16:58, Archit Taneja <architt@xxxxxxxxxxxxxx> wrote:

Hi Archit , thank you for review.

>
>
> On 11/28/2015 04:09 PM, Xinliang Liu wrote:
>>
>> Add dsi encoder driver for hi6220 SoC.
>>
>> Signed-off-by: Xinliang Liu <xinliang.liu@xxxxxxxxxx>
>> Signed-off-by: Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx>
>> Signed-off-by: Andy Green <andy.green@xxxxxxxxxx>
>> ---
>>   drivers/gpu/drm/hisilicon/Kconfig        |   1 +
>>   drivers/gpu/drm/hisilicon/Makefile       |   3 +-
>>   drivers/gpu/drm/hisilicon/hisi_drm_dsi.c | 728
>> +++++++++++++++++++++++++++++++
>>   drivers/gpu/drm/hisilicon/hisi_dsi_reg.h |  89 ++++
>>   4 files changed, 820 insertions(+), 1 deletion(-)
>>   create mode 100644 drivers/gpu/drm/hisilicon/hisi_drm_dsi.c
>>   create mode 100644 drivers/gpu/drm/hisilicon/hisi_dsi_reg.h
>>
>> diff --git a/drivers/gpu/drm/hisilicon/Kconfig
>> b/drivers/gpu/drm/hisilicon/Kconfig
>> index 70aa8d1..f1c33c2 100644
>> --- a/drivers/gpu/drm/hisilicon/Kconfig
>> +++ b/drivers/gpu/drm/hisilicon/Kconfig
>> @@ -4,6 +4,7 @@ config DRM_HISI
>>         select DRM_KMS_HELPER
>>         select DRM_GEM_CMA_HELPER
>>         select DRM_KMS_CMA_HELPER
>> +       select DRM_MIPI_DSI
>>         help
>>           Choose this option if you have a hisilicon chipsets(hi6220).
>>           If M is selected the module will be called hisi-drm.
>> diff --git a/drivers/gpu/drm/hisilicon/Makefile
>> b/drivers/gpu/drm/hisilicon/Makefile
>> index 3433c8b..5083c1f 100644
>> --- a/drivers/gpu/drm/hisilicon/Makefile
>> +++ b/drivers/gpu/drm/hisilicon/Makefile
>> @@ -1,4 +1,5 @@
>>   hisi-drm-y := hisi_drm_drv.o \
>> -             hisi_drm_ade.o
>> +             hisi_drm_ade.o \
>> +             hisi_drm_dsi.o
>>
>>   obj-$(CONFIG_DRM_HISI)        += hisi-drm.o
>> diff --git a/drivers/gpu/drm/hisilicon/hisi_drm_dsi.c
>> b/drivers/gpu/drm/hisilicon/hisi_drm_dsi.c
>> new file mode 100644
>> index 0000000..7a6cf66
>> --- /dev/null
>> +++ b/drivers/gpu/drm/hisilicon/hisi_drm_dsi.c
>> @@ -0,0 +1,728 @@
>> +/*
>> + * Hisilicon hi6220 SoC dsi driver
>> + *
>> + * Copyright (c) 2014-2015 Hisilicon Limited.
>> + * Author:
>> + *     Xinliang Liu <xinliang.liu@xxxxxxxxxx>
>> + *     Xinliang Liu <z.liuxinliang@xxxxxxxxxxxxx>
>> + *     Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/component.h>
>> +#include <linux/of_graph.h>
>> +
>> +#include <drm/drm_crtc_helper.h>
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_encoder_slave.h>
>> +#include <drm/drm_atomic_helper.h>
>> +
>> +#include "hisi_dsi_reg.h"
>> +
>> +#define MAX_TX_ESC_CLK            (10)
>> +#define ROUND(x, y) ((x) / (y) + ((x) % (y) * 10 / (y) >= 5 ? 1 : 0))
>> +#define DEFAULT_MIPI_CLK_RATE   19200000
>> +#define DEFAULT_MIPI_CLK_PERIOD_PS (1000000000 / (DEFAULT_MIPI_CLK_RATE /
>> 1000))
>> +#define R(x) ((u32)((((u64)(x) * (u64)1000 * (u64)mode->clock) / \
>> +             phy->lane_byte_clk_kHz)))
>> +
>> +#define encoder_to_dsi(encoder) \
>> +       container_of(encoder, struct hisi_dsi, encoder)
>> +#define host_to_dsi(host) \
>> +       container_of(host, struct hisi_dsi, host)
>> +
>> +struct mipi_phy_register {
>> +       u32 clk_t_lpx;
>> +       u32 clk_t_hs_prepare;
>> +       u32 clk_t_hs_zero;
>> +       u32 clk_t_hs_trial;
>> +       u32 clk_t_wakeup;
>> +       u32 data_t_lpx;
>> +       u32 data_t_hs_prepare;
>> +       u32 data_t_hs_zero;
>> +       u32 data_t_hs_trial;
>> +       u32 data_t_ta_go;
>> +       u32 data_t_ta_get;
>> +       u32 data_t_wakeup;
>> +       u32 hstx_ckg_sel;
>> +       u32 pll_fbd_div5f;
>> +       u32 pll_fbd_div1f;
>> +       u32 pll_fbd_2p;
>> +       u32 pll_enbwt;
>> +       u32 pll_fbd_p;
>> +       u32 pll_fbd_s;
>> +       u32 pll_pre_div1p;
>> +       u32 pll_pre_p;
>> +       u32 pll_vco_750M;
>> +       u32 pll_lpf_rs;
>> +       u32 pll_lpf_cs;
>> +       u32 clklp2hs_time;
>> +       u32 clkhs2lp_time;
>> +       u32 lp2hs_time;
>> +       u32 hs2lp_time;
>> +       u32 clk_to_data_delay;
>> +       u32 data_to_clk_delay;
>> +       u32 lane_byte_clk_kHz;
>> +       u32 clk_division;
>> +};
>> +
>> +struct dsi_hw_ctx {
>> +       void __iomem *base;
>> +       struct clk *dsi_cfg_clk;
>> +};
>> +
>> +struct hisi_dsi {
>> +       struct drm_encoder encoder;
>> +       struct drm_display_mode cur_mode;
>> +       struct dsi_hw_ctx *ctx;
>> +       struct mipi_phy_register phy;
>> +
>> +       u32 lanes;
>> +       enum mipi_dsi_pixel_format format;
>> +       unsigned long mode_flags;
>> +       bool enable;
>> +};
>> +
>> +struct dsi_data {
>> +       struct hisi_dsi dsi;
>> +       struct dsi_hw_ctx ctx;
>> +};
>> +
>> +struct dsi_phy_seq_info {
>> +       u32 min_range_kHz;
>> +       u32 max_range_kHz;
>> +       u32 pll_vco_750M;
>> +       u32 hstx_ckg_sel;
>> +};
>> +
>> +static const struct dsi_phy_seq_info dphy_seq_info[] = {
>> +       {   46000,    62000,   1,    7 },
>> +       {   62000,    93000,   0,    7 },
>> +       {   93000,   125000,   1,    6 },
>> +       {  125000,   187000,   0,    6 },
>> +       {  187000,   250000,   1,    5 },
>> +       {  250000,   375000,   0,    5 },
>> +       {  375000,   500000,   1,    4 },
>> +       {  500000,   750000,   0,    4 },
>> +       {  750000,  1000000,   1,    0 },
>> +       { 1000000,  1500000,   0,    0 }
>> +};
>> +
>> +static void set_dsi_phy_rate_equal_or_faster(u32 phy_freq_kHz,
>> +                                            struct mipi_phy_register
>> *phy)
>> +{
>> +       u32 ui = 0;
>> +       u32 cfg_clk_ps = DEFAULT_MIPI_CLK_PERIOD_PS;
>> +       u32 i = 0;
>> +       u32 q_pll = 1;
>> +       u32 m_pll = 0;
>> +       u32 n_pll = 0;
>> +       u32 r_pll = 1;
>> +       u32 m_n = 0;
>> +       u32 m_n_int = 0;
>> +       u64 f_kHz;
>> +       u64 temp;
>> +       u64 tmp_kHz = phy_freq_kHz;
>> +
>> +       do {
>> +               f_kHz = tmp_kHz;
>> +
>> +               /* Find the PLL clock range from the table */
>> +               for (i = 0; i < ARRAY_SIZE(dphy_seq_info); i++)
>> +                       if (f_kHz > dphy_seq_info[i].min_range_kHz &&
>> +                           f_kHz <= dphy_seq_info[i].max_range_kHz)
>> +                               break;
>> +
>> +               if (i == ARRAY_SIZE(dphy_seq_info)) {
>> +                       DRM_ERROR("%lldkHz out of range\n", f_kHz);
>> +                       return;
>> +               }
>> +
>> +               phy->pll_vco_750M = dphy_seq_info[i].pll_vco_750M;
>> +               phy->hstx_ckg_sel = dphy_seq_info[i].hstx_ckg_sel;
>> +
>> +               if (phy->hstx_ckg_sel <= 7 &&
>> +                   phy->hstx_ckg_sel >= 4)
>> +                       q_pll = 0x10 >> (7 - phy->hstx_ckg_sel);
>> +
>> +               temp = f_kHz * (u64)q_pll * (u64)cfg_clk_ps;
>> +               m_n_int = temp / (u64)1000000000;
>> +               m_n = (temp % (u64)1000000000) / (u64)100000000;
>> +
>> +               if (m_n_int % 2 == 0) {
>> +                       if (m_n * 6 >= 50) {
>> +                               n_pll = 2;
>> +                               m_pll = (m_n_int + 1) * n_pll;
>> +                       } else if (m_n * 6 >= 30) {
>> +                               n_pll = 3;
>> +                               m_pll = m_n_int * n_pll + 2;
>> +                       } else {
>> +                               n_pll = 1;
>> +                               m_pll = m_n_int * n_pll;
>> +                       }
>> +               } else {
>> +                       if (m_n * 6 >= 50) {
>> +                               n_pll = 1;
>> +                               m_pll = (m_n_int + 1) * n_pll;
>> +                       } else if (m_n * 6 >= 30) {
>> +                               n_pll = 1;
>> +                               m_pll = (m_n_int + 1) * n_pll;
>> +                       } else if (m_n * 6 >= 10) {
>> +                               n_pll = 3;
>> +                               m_pll = m_n_int * n_pll + 1;
>> +                       } else {
>> +                               n_pll = 2;
>> +                               m_pll = m_n_int * n_pll;
>> +                       }
>> +               }
>> +
>> +               if (n_pll == 1) {
>> +                       phy->pll_fbd_p = 0;
>> +                       phy->pll_pre_div1p = 1;
>> +               } else {
>> +                       phy->pll_fbd_p = n_pll;
>> +                       phy->pll_pre_div1p = 0;
>> +               }
>> +
>> +               if (phy->pll_fbd_2p <= 7 && phy->pll_fbd_2p >= 4)
>> +                       r_pll = 0x10 >> (7 - phy->pll_fbd_2p);
>> +
>> +               if (m_pll == 2) {
>> +                       phy->pll_pre_p = 0;
>> +                       phy->pll_fbd_s = 0;
>> +                       phy->pll_fbd_div1f = 0;
>> +                       phy->pll_fbd_div5f = 1;
>> +               } else if (m_pll >= 2 * 2 * r_pll && m_pll <= 2 * 4 *
>> r_pll) {
>> +                       phy->pll_pre_p = m_pll / (2 * r_pll);
>> +                       phy->pll_fbd_s = 0;
>> +                       phy->pll_fbd_div1f = 1;
>> +                       phy->pll_fbd_div5f = 0;
>> +               } else if (m_pll >= 2 * 5 * r_pll && m_pll <= 2 * 150 *
>> r_pll) {
>> +                       if (((m_pll / (2 * r_pll)) % 2) == 0) {
>> +                               phy->pll_pre_p =
>> +                                       (m_pll / (2 * r_pll)) / 2 - 1;
>> +                               phy->pll_fbd_s =
>> +                                       (m_pll / (2 * r_pll)) % 2 + 2;
>> +                       } else {
>> +                               phy->pll_pre_p =
>> +                                       (m_pll / (2 * r_pll)) / 2;
>> +                               phy->pll_fbd_s =
>> +                                       (m_pll / (2 * r_pll)) % 2;
>> +                       }
>> +                       phy->pll_fbd_div1f = 0;
>> +                       phy->pll_fbd_div5f = 0;
>> +               } else {
>> +                       phy->pll_pre_p = 0;
>> +                       phy->pll_fbd_s = 0;
>> +                       phy->pll_fbd_div1f = 0;
>> +                       phy->pll_fbd_div5f = 1;
>> +               }
>> +
>> +               f_kHz = (u64)1000000000 * (u64)m_pll /
>> +                       ((u64)cfg_clk_ps * (u64)n_pll * (u64)q_pll);
>> +
>> +               if (f_kHz >= phy_freq_kHz)
>> +                       break;
>> +
>> +               tmp_kHz += 10;
>> +
>> +       } while (1);
>> +
>> +       ui = 1000000 / f_kHz;
>> +
>> +       phy->clk_t_lpx = ROUND(50, 8 * ui);
>> +       phy->clk_t_hs_prepare = ROUND(133, 16 * ui) - 1;
>> +
>> +       phy->clk_t_hs_zero = ROUND(262, 8 * ui);
>> +       phy->clk_t_hs_trial = 2 * (ROUND(60, 8 * ui) - 1);
>> +       phy->clk_t_wakeup = ROUND(1000000, (cfg_clk_ps / 1000) - 1);
>> +       if (phy->clk_t_wakeup > 0xff)
>> +               phy->clk_t_wakeup = 0xff;
>> +       phy->data_t_wakeup = phy->clk_t_wakeup;
>> +       phy->data_t_lpx = phy->clk_t_lpx;
>> +       phy->data_t_hs_prepare = ROUND(125 + 10 * ui, 16 * ui) - 1;
>> +       phy->data_t_hs_zero = ROUND(105 + 6 * ui, 8 * ui);
>> +       phy->data_t_hs_trial = 2 * (ROUND(60 + 4 * ui, 8 * ui) - 1);
>> +       phy->data_t_ta_go = 3;
>> +       phy->data_t_ta_get = 4;
>> +
>> +       phy->pll_enbwt = 1;
>> +       phy->clklp2hs_time = ROUND(407, 8 * ui) + 12;
>> +       phy->clkhs2lp_time = ROUND(105 + 12 * ui, 8 * ui);
>> +       phy->lp2hs_time = ROUND(240 + 12 * ui, 8 * ui) + 1;
>> +       phy->hs2lp_time = phy->clkhs2lp_time;
>> +       phy->clk_to_data_delay = 1 + phy->clklp2hs_time;
>> +       phy->data_to_clk_delay = ROUND(60 + 52 * ui, 8 * ui) +
>> +                               phy->clkhs2lp_time;
>> +
>> +       phy->lane_byte_clk_kHz = f_kHz / 8;
>> +       phy->clk_division = phy->lane_byte_clk_kHz / MAX_TX_ESC_CLK;
>> +       if (phy->lane_byte_clk_kHz % MAX_TX_ESC_CLK)
>> +               phy->clk_division++;
>> +}
>> +
>> +static u32 dsi_get_dpi_color_coding(enum mipi_dsi_pixel_format format)
>> +{
>> +       u32 val;
>> +
>> +       /* TODO: only support RGB888 now, to support more */
>> +       switch (format) {
>> +       case MIPI_DSI_FMT_RGB888:
>> +               val = DSI_24BITS_1;
>> +               break;
>> +       default:
>> +               val = DSI_24BITS_1;
>> +               break;
>> +       }
>> +
>> +       return val;
>> +}
>> +
>> +static void dsi_mipi_phy_clks(void __iomem *base,
>> +                             struct mipi_phy_register *phy,
>> +                             u32 lanes)
>> +{
>> +       u32 delay_count;
>> +       bool is_ready;
>> +       u32 val;
>> +       u32 i;
>> +
>> +       /* set lanes value */
>> +       val = (lanes - 1) | (PHY_STOP_WAIT_TIME << 8);
>> +       writel(val, base + PHY_IF_CFG);
>> +
>> +       /* set phy clk division */
>> +       val = readl(base + CLKMGR_CFG) | phy->clk_division;
>> +       writel(val, base + CLKMGR_CFG);
>> +
>> +       /* clean up phy set param */
>> +       writel(0, base + PHY_RSTZ);
>> +       writel(0, base + PHY_TST_CTRL0);
>> +       writel(1, base + PHY_TST_CTRL0);
>> +       writel(0, base + PHY_TST_CTRL0);
>> +
>> +       /* clock lane Timing control - TLPX */
>> +       dsi_phy_tst_set(base, 0x10010, phy->clk_t_lpx);
>> +
>> +       /* clock lane Timing control - THS-PREPARE */
>> +       dsi_phy_tst_set(base, 0x10011, phy->clk_t_hs_prepare);
>> +
>> +       /* clock lane Timing control - THS-ZERO */
>> +       dsi_phy_tst_set(base, 0x10012, phy->clk_t_hs_zero);
>> +
>> +       /* clock lane Timing control - THS-TRAIL */
>> +       dsi_phy_tst_set(base, 0x10013, phy->clk_t_hs_trial);
>> +
>> +       /* clock lane Timing control - TWAKEUP */
>> +       dsi_phy_tst_set(base, 0x10014, phy->clk_t_wakeup);
>> +
>> +       /* data lane */
>> +       for (i = 0; i < lanes; i++) {
>> +               /* Timing control - TLPX*/
>> +               dsi_phy_tst_set(base, 0x10020 + (i << 4),
>> phy->data_t_lpx);
>> +
>> +               /* Timing control - THS-PREPARE */
>> +               dsi_phy_tst_set(base, 0x10021 + (i << 4),
>> +                               phy->data_t_hs_prepare);
>> +
>> +               /* Timing control - THS-ZERO */
>> +               dsi_phy_tst_set(base, 0x10022 + (i << 4),
>> phy->data_t_hs_zero);
>> +
>> +               /* Timing control - THS-TRAIL */
>> +               dsi_phy_tst_set(base, 0x10023 + (i << 4),
>> phy->data_t_hs_trial);
>> +
>> +               /* Timing control - TTA-GO */
>> +               dsi_phy_tst_set(base, 0x10024 + (i << 4),
>> phy->data_t_ta_go);
>> +
>> +               /* Timing control - TTA-GET */
>> +               dsi_phy_tst_set(base, 0x10025 + (i << 4),
>> phy->data_t_ta_get);
>> +
>> +               /*  Timing control - TWAKEUP */
>> +               dsi_phy_tst_set(base, 0x10026 + (i << 4),
>> phy->data_t_wakeup);
>> +       }
>> +
>> +       /* physical configuration I  */
>> +       dsi_phy_tst_set(base, 0x10060, phy->hstx_ckg_sel);
>> +
>> +       /* physical configuration pll II  */
>> +       val = (phy->pll_fbd_div5f << 5) + (phy->pll_fbd_div1f << 4) +
>> +                               (phy->pll_fbd_2p << 1) + phy->pll_enbwt;
>> +       dsi_phy_tst_set(base, 0x10063, val);
>> +
>> +       /* physical configuration pll II  */
>> +       dsi_phy_tst_set(base, 0x10064, phy->pll_fbd_p);
>> +
>> +       /* physical configuration pll III  */
>> +       dsi_phy_tst_set(base, 0x10065, phy->pll_fbd_s);
>> +
>> +       /*physical configuration pll IV*/
>> +       val = (phy->pll_pre_div1p << 7) + phy->pll_pre_p;
>> +       dsi_phy_tst_set(base, 0x10066, val);
>> +
>> +       /*physical configuration pll V*/
>
>
> It would be nice to fix the comment spacing for uniformity.
>

will be fixed in v3.

>
>> +       val = (phy->pll_vco_750M << 4) + (phy->pll_lpf_rs << 2) +
>> +                                       phy->pll_lpf_cs + BIT(5);
>> +       dsi_phy_tst_set(base, 0x10067, val);
>> +
>> +       writel(BIT(2), base + PHY_RSTZ);
>> +       udelay(1);
>> +       writel(BIT(2) | BIT(0), base + PHY_RSTZ);
>> +       udelay(1);
>> +       writel(BIT(2) | BIT(1) | BIT(0), base + PHY_RSTZ);
>> +       usleep_range(1000, 1500);
>> +
>> +       /* wait for phy's clock ready */
>> +       delay_count = 0;
>> +       is_ready = false;
>> +       while (1) {
>> +               val = readl(base +  PHY_STATUS);
>> +               if (((BIT(0) | BIT(2)) & val) || delay_count > 100) {
>> +                       is_ready = (delay_count < 100) ? true : false;
>> +                       delay_count = 0;
>> +                       break;
>> +               }
>> +
>> +               udelay(1);
>> +               ++delay_count;
>> +       }
>
>
> You could simplify this a bit:
>
>         delay_count = 100
>         while (delay_count) {
>         ...
>         --delay_count;
>         }
>
>         if (!delay_count)
>                 DRM_INFO("...");
>

Great! This looks much more clearly. will be fixed in v3.

>> +
>> +       if (!is_ready)
>> +               DRM_INFO("phylock and phystopstateclklane is not
>> ready.\n");
>> +}
>> +
>> +static void dsi_set_mode_timing(void __iomem *base,
>> +                               struct mipi_phy_register *phy,
>> +                               struct drm_display_mode *mode,
>> +                               enum mipi_dsi_pixel_format format)
>> +{
>> +       u32 hfp, hbp, hsw, vfp, vbp, vsw;
>> +       u32 hline_time;
>> +       u32 hsa_time;
>> +       u32 hbp_time;
>> +       u32 pixel_clk_kHz;
>> +       int htot, vtot;
>> +       u32 val;
>> +
>> +       /* DSI color coding setting */
>> +       val = dsi_get_dpi_color_coding(format);
>> +       writel(val, base + DPI_COLOR_CODING);
>> +
>> +       /* DSI format and pol setting */
>> +       val = (mode->flags & DRM_MODE_FLAG_NHSYNC ? 1 : 0) << 2;
>> +       val |= (mode->flags & DRM_MODE_FLAG_NVSYNC ? 1 : 0) << 1;
>> +       writel(val, base +  DPI_CFG_POL);
>> +
>> +       /*
>> +        * The DSI IP accepts vertical timing using lines as normal,
>> +        * but horizontal timing is a mixture of pixel-clocks for the
>> +        * active region and byte-lane clocks for the blanking-related
>> +        * timings.  hfp is specified as the total hline_time in byte-
>> +        * lane clocks minus hsa, hbp and active.
>> +        */
>> +       pixel_clk_kHz = mode->clock;
>> +       htot = mode->htotal;
>> +       vtot = mode->vtotal;
>> +       hfp = mode->hsync_start - mode->hdisplay;
>> +       hbp = mode->htotal - mode->hsync_end;
>> +       hsw = mode->hsync_end - mode->hsync_start;
>> +       vfp = mode->vsync_start - mode->vdisplay;
>> +       vbp = mode->vtotal - mode->vsync_end;
>> +       vsw = mode->vsync_end - mode->vsync_start;
>> +       if (vsw > 15) {
>> +               DRM_INFO("vsw exceeded 15\n");
>> +               vtot -= vsw - 15;
>> +               vsw = 15;
>> +       }
>> +
>> +       hsa_time = (hsw * phy->lane_byte_clk_kHz) / pixel_clk_kHz;
>> +       hbp_time = (hbp * phy->lane_byte_clk_kHz) / pixel_clk_kHz;
>> +       hline_time  = (((u64)htot * (u64)phy->lane_byte_clk_kHz)) /
>> +                     pixel_clk_kHz;
>> +
>> +       if ((R(hline_time) / 1000) > htot) {
>> +               DRM_INFO("--: hline_time=%d\n", hline_time);
>> +               hline_time--;
>> +       }
>> +
>> +       if ((R(hline_time) / 1000) < htot) {
>
>
> Could we use a better macro name here? Also, it would be nice to pass
> the phy argument to it too. Maybe even move the divide by 1000 in the macro.
>

Great idea! will be fixed in v3.

>
>> +               DRM_INFO("++: hline_time=%d\n", hline_time);
>> +               hline_time++;
>> +       }
>> +
>> +       /* all specified in byte-lane clocks */
>> +       writel(hsa_time, base + VID_HSA_TIME);
>> +       writel(hbp_time, base + VID_HBP_TIME);
>> +       writel(hline_time, base + VID_HLINE_TIME);
>> +
>> +       writel(vsw, base + VID_VSA_LINES);
>> +       writel(vbp, base + VID_VBP_LINES);
>> +       writel(vfp, base + VID_VFP_LINES);
>> +       writel(mode->vdisplay, base + VID_VACTIVE_LINES);
>> +       writel(mode->hdisplay, base + VID_PKT_SIZE);
>> +}
>> +
>> +static void dsi_set_video_mode_type(void __iomem *base,
>> +                                   struct mipi_phy_register *phy,
>> +                                   unsigned long flags)
>> +{
>> +       u32 val;
>> +       u32 mode_mask = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
>> +               MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
>> +       u32 non_burst_sync_pulse = MIPI_DSI_MODE_VIDEO |
>> +               MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
>> +       u32 non_burst_sync_event = MIPI_DSI_MODE_VIDEO;
>> +
>> +       /*
>> +        * choose video type
>> +        */
>> +       if ((flags & mode_mask) == non_burst_sync_pulse)
>> +               val = DSI_NON_BURST_SYNC_PULSES;
>> +       else if ((flags & mode_mask) == non_burst_sync_event)
>> +               val = DSI_NON_BURST_SYNC_EVENTS;
>> +       else
>> +               val = DSI_BURST_SYNC_PULSES_1;
>> +
>> +       writel(val, base + VID_MODE_CFG);
>> +       /* TODO: to support LCD panel need to set LP command transfer */
>> +}
>> +
>> +static void dsi_mipi_init(struct hisi_dsi *dsi)
>> +{
>> +       struct dsi_hw_ctx *ctx = dsi->ctx;
>> +       struct mipi_phy_register *phy = &dsi->phy;
>> +       struct drm_display_mode *mode = &dsi->cur_mode;
>> +       void __iomem *base = ctx->base;
>> +       u32 dphy_freq_kHz;
>> +
>> +       /* count phy params */
>> +       dphy_freq_kHz = mode->clock * 24 / dsi->lanes;
>
>
> Maybe replace the 24 above with the bpp in use for future compatibility?
>

Yes, it is bpp. will be replaced by bpp in v3.

>
>> +       set_dsi_phy_rate_equal_or_faster(dphy_freq_kHz, phy);
>> +
>> +       /* reset Core */
>> +       writel(0, base + PWR_UP);
>> +
>> +       /* set phy clocks */
>> +       dsi_mipi_phy_clks(base, phy, dsi->lanes);
>> +
>> +       /* set dsi mode */
>> +       dsi_set_mode_timing(base, phy, mode, dsi->format);
>> +
>> +       /* set video mode type and low power */
>> +       dsi_set_video_mode_type(base, phy, dsi->mode_flags);
>> +
>> +       /* DSI and D-PHY Initialization */
>> +       writel(DSI_VIDEO_MODE, base + MODE_CFG);
>> +       writel(BIT(0), base + LPCLK_CTRL);
>> +       writel(BIT(0), base + PWR_UP);
>> +}
>> +
>> +static void dsi_encoder_disable(struct drm_encoder *encoder)
>> +{
>> +       struct hisi_dsi *dsi = encoder_to_dsi(encoder);
>> +       struct dsi_hw_ctx *ctx = dsi->ctx;
>> +       void __iomem *base = ctx->base;
>> +
>> +       DRM_DEBUG_DRIVER("enter\n");
>> +       if (!dsi->enable)
>> +               return;
>> +
>> +       writel(0, base + PWR_UP);
>> +       writel(0, base + LPCLK_CTRL);
>> +       writel(0, base + PHY_RSTZ);
>> +       clk_disable_unprepare(ctx->dsi_cfg_clk);
>> +
>> +       dsi->enable = false;
>> +       DRM_DEBUG_DRIVER("exit success.\n");
>> +}
>> +
>> +static void dsi_encoder_enable(struct drm_encoder *encoder)
>> +{
>> +       struct hisi_dsi *dsi = encoder_to_dsi(encoder);
>> +       struct dsi_hw_ctx *ctx = dsi->ctx;
>> +       int ret;
>> +
>> +       DRM_DEBUG_DRIVER("enter.\n");
>> +       if (dsi->enable)
>> +               return;
>> +
>> +       /* mipi dphy clock enable */
>> +       ret = clk_prepare_enable(ctx->dsi_cfg_clk);
>> +       if (ret) {
>> +               DRM_ERROR("fail to enable dsi_cfg_clk: %d\n", ret);
>> +               return;
>> +       }
>> +
>> +       dsi_mipi_init(dsi);
>> +
>> +       dsi->enable = true;
>> +       DRM_DEBUG_DRIVER("exit success.\n");
>> +}
>> +
>> +static void dsi_encoder_mode_set(struct drm_encoder *encoder,
>> +                                struct drm_display_mode *mode,
>> +                                struct drm_display_mode *adj_mode)
>> +{
>> +       struct hisi_dsi *dsi = encoder_to_dsi(encoder);
>> +
>> +       DRM_DEBUG_DRIVER("enter.\n");
>> +       drm_mode_copy(&dsi->cur_mode, adj_mode);
>> +       DRM_DEBUG_DRIVER("exit success.\n");
>> +}
>> +
>> +static int dsi_encoder_atomic_check(struct drm_encoder *encoder,
>> +                                   struct drm_crtc_state *crtc_state,
>> +                                   struct drm_connector_state
>> *conn_state)
>> +{
>> +       struct drm_display_mode *mode = &crtc_state->mode;
>> +
>> +       DRM_DEBUG_DRIVER("enter.\n");
>> +       if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
>> +               DRM_ERROR("not support INTERLACE mode\n");
>> +               return MODE_NO_INTERLACE;
>> +       }
>> +
>> +       /* pixel clock support range is (1190494208/64, 1190494208)Hz */
>> +       if (mode->clock < 18602 || mode->clock > 1190494) {
>
>
> I don't think we need to worry about the maximum limit if we support pixel
> clocks up to 1190 Mhz :)

yea, 1190Mhz is too larger.  will be fixed in v3.

>
>
>> +               DRM_ERROR("mode clock not support\n");
>> +               return MODE_CLOCK_RANGE;
>> +       }
>> +
>> +       DRM_DEBUG_DRIVER("exit success.\n");
>> +       return 0;
>> +}
>> +
>> +static const struct drm_encoder_helper_funcs hisi_encoder_helper_funcs =
>> {
>> +       .atomic_check   = dsi_encoder_atomic_check,
>> +       .mode_set       = dsi_encoder_mode_set,
>> +       .enable         = dsi_encoder_enable,
>> +       .disable        = dsi_encoder_disable
>> +};
>> +
>> +static const struct drm_encoder_funcs hisi_encoder_funcs = {
>> +       .destroy = drm_encoder_cleanup,
>> +};
>> +
>> +static int hisi_drm_encoder_init(struct drm_device *dev,
>> +                                struct drm_encoder *encoder)
>> +{
>> +       int ret;
>> +
>> +       encoder->possible_crtcs = 1;
>> +       ret = drm_encoder_init(dev, encoder, &hisi_encoder_funcs,
>> +                              DRM_MODE_ENCODER_TMDS);
>
>
> We should have the encoder as DRM_MODE_ENCODER_DSI here, even if the
> connector is finally hdmi.

Correct! will be fixed in v3.

>
>
>> +       if (ret) {
>> +               DRM_ERROR("failed to init dsi encoder\n");
>> +               return ret;
>> +       }
>> +
>> +       drm_encoder_helper_add(encoder, &hisi_encoder_helper_funcs);
>> +
>> +       return 0;
>> +}
>> +
>> +static int dsi_bind(struct device *dev, struct device *master, void
>> *data)
>> +{
>> +       struct dsi_data *ddata = dev_get_drvdata(dev);
>> +       struct hisi_dsi *dsi = &ddata->dsi;
>> +       struct drm_device *drm_dev = data;
>> +       int ret;
>> +
>> +       ret = hisi_drm_encoder_init(drm_dev, &dsi->encoder);
>> +       if (ret)
>> +               return ret;
>> +
>> +       return 0;
>> +}
>> +
>> +static void dsi_unbind(struct device *dev, struct device *master, void
>> *data)
>> +{
>> +       /* do nothing */
>> +}
>> +
>> +static const struct component_ops dsi_ops = {
>> +       .bind   = dsi_bind,
>> +       .unbind = dsi_unbind,
>> +};
>> +
>> +static int dsi_parse_dt(struct platform_device *pdev, struct hisi_dsi
>> *dsi)
>> +{
>> +       struct dsi_hw_ctx *ctx = dsi->ctx;
>> +       struct resource *res;
>> +
>> +
>> +       ctx->dsi_cfg_clk = devm_clk_get(&pdev->dev, "pclk_dsi");
>> +       if (IS_ERR(ctx->dsi_cfg_clk)) {
>> +               DRM_ERROR("failed to get dsi plck clock\n");
>> +               return PTR_ERR(ctx->dsi_cfg_clk);
>> +       }
>> +
>> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +       ctx->base = devm_ioremap_resource(&pdev->dev, res);
>> +       if (IS_ERR(ctx->base)) {
>> +               DRM_ERROR("failed to remap dsi io region\n");
>> +               return PTR_ERR(ctx->base);
>> +       }
>> +
>> +       return 0;
>> +}
>> +
>> +static int dsi_probe(struct platform_device *pdev)
>> +{
>> +       struct dsi_data *data;
>> +       struct hisi_dsi *dsi;
>> +       struct dsi_hw_ctx *ctx;
>> +       int ret;
>> +
>> +       data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
>> +       if (!data) {
>> +               DRM_ERROR("failed to allocate dsi data.\n");
>> +               return -ENOMEM;
>> +       }
>> +       dsi = &data->dsi;
>> +       ctx = &data->ctx;
>> +       dsi->ctx = ctx;
>> +
>> +       ret = dsi_parse_dt(pdev, dsi);
>> +       if (ret)
>> +               return ret;
>> +
>> +       platform_set_drvdata(pdev, data);
>> +
>> +       return component_add(&pdev->dev, &dsi_ops);
>> +}
>> +
>> +static int dsi_remove(struct platform_device *pdev)
>> +{
>> +       component_del(&pdev->dev, &dsi_ops);
>> +
>> +       return 0;
>> +}
>> +
>> +static const struct of_device_id dsi_of_match[] = {
>> +       {.compatible = "hisilicon,hi6220-dsi"},
>> +       { }
>> +};
>> +MODULE_DEVICE_TABLE(of, dsi_of_match);
>> +
>> +static struct platform_driver dsi_driver = {
>> +       .probe = dsi_probe,
>> +       .remove = dsi_remove,
>> +       .driver = {
>> +               .name = "hisi-dsi",
>> +               .owner = THIS_MODULE,
>> +               .of_match_table = dsi_of_match,
>> +       },
>> +};
>> +
>> +module_platform_driver(dsi_driver);
>> +
>> +MODULE_AUTHOR("Xinliang Liu <xinliang.liu@xxxxxxxxxx>");
>> +MODULE_AUTHOR("Xinliang Liu <z.liuxinliang@xxxxxxxxxxxxx>");
>> +MODULE_AUTHOR("Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx>");
>> +MODULE_DESCRIPTION("hisilicon hi6220 SoC dsi driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/gpu/drm/hisilicon/hisi_dsi_reg.h
>> b/drivers/gpu/drm/hisilicon/hisi_dsi_reg.h
>> new file mode 100644
>> index 0000000..db8f9df
>> --- /dev/null
>> +++ b/drivers/gpu/drm/hisilicon/hisi_dsi_reg.h
>> @@ -0,0 +1,89 @@
>> +/*
>> + * Copyright (c) 2014-2015 Hisilicon Limited.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + */
>> +
>> +#ifndef __HISI_DSI_REG_H__
>> +#define __HISI_DSI_REG_H__
>> +
>> +/*
>> + * regs
>> + */
>> +#define  PWR_UP                  (0x4)   /* Core power-up */
>> +#define  PHY_IF_CFG              (0xA4)  /* D-PHY interface configuration
>> */
>> +#define  CLKMGR_CFG              (0x8)   /* the internal clock dividers
>> */
>> +#define  PHY_RSTZ                (0xA0)  /* D-PHY reset control */
>> +#define  PHY_TST_CTRL0           (0xB4)  /* D-PHY test interface control
>> 0 */
>> +#define  PHY_TST_CTRL1           (0xB8)  /* D-PHY test interface control
>> 1 */
>> +#define  DPI_VCID                (0xC)   /* DPI virtual channel id */
>> +#define  DPI_COLOR_CODING        (0x10)  /* DPI color coding */
>> +#define  DPI_CFG_POL             (0x14)  /* DPI polarity configuration */
>> +#define  VID_HSA_TIME            (0x48)  /* Horizontal Sync Active time
>> */
>> +#define  VID_HBP_TIME            (0x4C)  /* Horizontal Back Porch time */
>> +#define  VID_HLINE_TIME          (0x50)  /* Line time */
>> +#define  VID_VSA_LINES           (0x54)  /* Vertical Sync Active period
>> */
>> +#define  VID_VBP_LINES           (0x58)  /* Vertical Back Porch period */
>> +#define  VID_VFP_LINES           (0x5C)  /* Vertical Front Porch period
>> */
>> +#define  VID_VACTIVE_LINES       (0x60)  /* Vertical resolution */
>> +#define  VID_PKT_SIZE            (0x3C)  /* Video packet size */
>> +#define  VID_MODE_CFG            (0x38)  /* Video mode configuration */
>> +#define  DPI_LP_CMD_TIM          (0x18)  /* Low-power command timing
>> config */
>> +#define  PHY_TMR_CFG             (0x9C)  /* Data lanes timing
>> configuration */
>> +#define  BTA_TO_CNT              (0x8C)  /* Response timeout definition
>> */
>> +#define  PHY_TMR_LPCLK_CFG       (0x98)  /* clock lane timing
>> configuration */
>> +#define  CLK_DATA_TMR_CFG        (0xCC)
>> +#define  LPCLK_CTRL              (0x94)  /* Low-power in clock lane */
>> +#define  PCKHDL_CFG              (0x2C)  /* Packet handler configuration
>> */
>> +#define  EDPI_CMD_SIZE           (0x64)  /* Size for eDPI packets */
>> +#define  MODE_CFG                (0x34)  /* Video or Command mode
>> selection */
>> +#define  PHY_STATUS              (0xB0)  /* D-PHY PPI status interface */
>> +
>> +#define        PHY_STOP_WAIT_TIME      (0x30)
>> +
>> +/*
>> + * regs relevant enum
>> + */
>> +enum dpi_color_coding {
>> +       DSI_24BITS_1 = 5,
>> +};
>> +
>> +enum dsi_video_mode_type {
>> +       DSI_NON_BURST_SYNC_PULSES = 0,
>> +       DSI_NON_BURST_SYNC_EVENTS,
>> +       DSI_BURST_SYNC_PULSES_1,
>> +       DSI_BURST_SYNC_PULSES_2
>> +};
>> +
>> +enum dsi_work_mode {
>> +       DSI_VIDEO_MODE = 0,
>> +       DSI_COMMAND_MODE
>> +};
>> +
>> +/*
>> + * regs Write/Read functions
>> + */
>> +static inline void dsi_phy_tst_set(void __iomem *base, u32 reg, u32 val)
>> +{
>> +       writel(reg, base + PHY_TST_CTRL1);
>> +       /* reg addr written at first */
>> +       wmb();
>> +       writel(0x02, base + PHY_TST_CTRL0);
>> +       /* cmd1 sent for write */
>> +       wmb();
>> +       writel(0x00, base + PHY_TST_CTRL0);
>> +       /* cmd2 sent for write */
>> +       wmb();
>> +       writel(val, base + PHY_TST_CTRL1);
>> +       /* Then write data */
>> +       wmb();
>> +       writel(0x02, base + PHY_TST_CTRL0);
>> +       /* cmd2 sent for write */
>> +       wmb();
>> +       writel(0x00, base + PHY_TST_CTRL0);
>> +}
>> +
>
>
> This doesn't look like something that should be inlined. Maybe move it to
> hisi_drm_dsi.c?

yes, you are right. will be fixed in v3.

Thanks,
-xinliang

>
>> +#endif /* __HISI_DRM_DSI_H__ */
>>
>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux