Hi Xiubo, On Fri, Nov 01, 2013 at 03:04:53PM +0800, Xiubo Li wrote: > This is the SGTL5000 codec based audio driver supported with both > playback and capture dai link implemention. > > This implementation is only compatible with device tree definition. > > Signed-off-by: Alison Wang <b18965@xxxxxxxxxxxxx > Signed-off-by: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx> > > Conflicts: > sound/soc/fsl/Makefile > --- > sound/soc/fsl/Kconfig | 10 ++ > sound/soc/fsl/Makefile | 2 + > sound/soc/fsl/fsl-sgtl5000-vf610.c | 208 +++++++++++++++++++++++++++++++++++++ I just doubt if this file naming is appropriate. Even if we might not have rigor rule for the file names, according to existing ones, they are all in a same pattern: [SoC name]-[codec name].c "imx-sgtl5000.c" for example I think it would make user less confused about what this file exactly is if this machine driver also follow the pattern: vf610-sgtl5000.c @Shawn What do you think about the file name? > 3 files changed, 220 insertions(+) > create mode 100644 sound/soc/fsl/fsl-sgtl5000-vf610.c > > diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig > index 9a8851e..1b835ba 100644 > --- a/sound/soc/fsl/Kconfig > +++ b/sound/soc/fsl/Kconfig > @@ -228,4 +228,14 @@ config SND_SOC_FSL_SAI > tristate > select SND_SOC_GENERIC_DMAENGINE_PCM > > +config SND_SOC_FSL_SGTL5000_VF610 Same problem with the this define. > + tristate "SoC Audio support for FSL boards with sgtl5000" And 'FSL' here confuses me a lot. Because those boards based on i.MX series also could be called FSL boards. > + depends on OF && I2C > + select SND_SOC_FSL_SAI > + select SND_SOC_FSL_PCM > + select SND_SOC_SGTL5000 > + help > + Say Y if you want to add support for SoC audio on an FSL board with > + a sgtl5000 codec. > + > endif # SND_FSL_SOC > diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile > index e5acc03..26fc551 100644 > --- a/sound/soc/fsl/Makefile > +++ b/sound/soc/fsl/Makefile > @@ -59,5 +59,7 @@ obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o > > # FSL ARM SAI/SGT15000 Platform Support > snd-soc-fsl-sai-objs := fsl-sai.o > +snd-soc-fsl-sgtl5000-vf610-objs := fsl-sgtl5000-vf610.o > > obj-$(CONFIG_SND_SOC_FSL_SAI) += snd-soc-fsl-sai.o > +obj-$(CONFIG_SND_SOC_FSL_SGTL5000_VF610) += snd-soc-fsl-sgtl5000-vf610.o > diff --git a/sound/soc/fsl/fsl-sgtl5000-vf610.c b/sound/soc/fsl/fsl-sgtl5000-vf610.c > new file mode 100644 > index 0000000..f535b42 > --- /dev/null > +++ b/sound/soc/fsl/fsl-sgtl5000-vf610.c > @@ -0,0 +1,208 @@ > +/* > + * Freeacale ALSA SoC Audio using SGT1500 as codec. > + * > + * Copyright 2012-2013 Freescale Semiconductor, Inc. > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + */ > + > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_platform.h> > +#include <linux/i2c.h> > +#include <linux/clk.h> > + > +#include "../codecs/sgtl5000.h" > +#include "fsl-sai.h" > + > +static unsigned int sysclk_rate; > + > +static int fsl_sgtl5000_dai_init(struct snd_soc_pcm_runtime *rtd) Naming issue here again. At least from my point of view, if you actually merged imx-sgtl5000 with vf610-sgtl5000 and made it also compatible to other freescale SoCs, you could then fairly call it fsl_sgtl5000_xxxx. Well, I might be a little picky here because it's a static function and won't conflict others. Just the name here doesn't look so explicit to me. Please reconsider about this whole file's naming. Best regards, Nicolin Chen > +{ > + int ret; > + struct device *dev = rtd->card->dev; > + > + ret = snd_soc_dai_set_sysclk(rtd->codec_dai, SGTL5000_SYSCLK, > + sysclk_rate, SND_SOC_CLOCK_IN); > + if (ret) { > + dev_err(dev, "could not set codec driver clock params :%d\n", > + ret); > + return ret; > + } > + > + ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, FSL_SAI_CLK_BUS, > + sysclk_rate, SND_SOC_CLOCK_OUT); > + if (ret) { > + dev_err(dev, "could not set cpu dai driver clock params :%d\n", > + ret); > + return ret; > + } > + > + return 0; > +} > + > +static int sgtl5000_params(struct snd_pcm_substream *substream, > + struct snd_pcm_hw_params *params) > +{ > + struct snd_soc_pcm_runtime *rtd = substream->private_data; > + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; > + unsigned int channels = params_channels(params); > + > + /* TODO: The SAI driver should figure this out for us */ > + switch (channels) { > + case 2: > + snd_soc_dai_set_tdm_slot(cpu_dai, 0xfffffffc, 0xfffffffc, 2, 0); > + break; > + case 1: > + snd_soc_dai_set_tdm_slot(cpu_dai, 0xfffffffe, 0xfffffffe, 1, 0); > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static struct snd_soc_ops fsl_sgtl5000_hifi_ops = { > + .hw_params = sgtl5000_params, > +}; > + > +static struct snd_soc_dai_link fsl_sgtl5000_dai = { > + .name = "HiFi", > + .stream_name = "HiFi", > + .codec_dai_name = "sgtl5000", > + .init = &fsl_sgtl5000_dai_init, > + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | > + SND_SOC_DAIFMT_CBM_CFM, > + .ops = &fsl_sgtl5000_hifi_ops, > +}; > + > +static const struct snd_soc_dapm_widget fsl_sgtl5000_dapm_widgets[] = { > + SND_SOC_DAPM_MIC("Mic Jack", NULL), > + SND_SOC_DAPM_LINE("Line In Jack", NULL), > + SND_SOC_DAPM_HP("Headphone Jack", NULL), > + SND_SOC_DAPM_SPK("Line Out Jack", NULL), > + SND_SOC_DAPM_SPK("Ext Spk", NULL), > +}; > + > +static struct snd_soc_card fsl_sgt1500_card = { > + .owner = THIS_MODULE, > + .num_links = 1, > + .dai_link = &fsl_sgtl5000_dai, > + .dapm_widgets = fsl_sgtl5000_dapm_widgets, > + .num_dapm_widgets = ARRAY_SIZE(fsl_sgtl5000_dapm_widgets), > +}; > + > +static int fsl_sgtl5000_parse_dt(struct platform_device *pdev) > +{ > + int ret; > + struct device_node *sai_np, *codec_np; > + struct clk *codec_clk; > + struct i2c_client *codec_dev; > + struct device_node *np = pdev->dev.of_node; > + > + ret = snd_soc_of_parse_card_name(&fsl_sgt1500_card, "model"); > + if (ret) > + return ret; > + > + ret = snd_soc_of_parse_audio_routing(&fsl_sgt1500_card, > + "audio-routing"); > + if (ret) > + return ret; > + > + sai_np = of_parse_phandle(np, "saif-controller", 0); > + if (!sai_np) { > + dev_err(&pdev->dev, "\"saif-controller\" phandle missing or " > + "invalid\n"); > + return -EINVAL; > + } > + fsl_sgtl5000_dai.cpu_of_node = sai_np; > + fsl_sgtl5000_dai.platform_of_node = sai_np; > + > + codec_np = of_parse_phandle(np, "audio-codec", 0); > + if (!codec_np) { > + dev_err(&pdev->dev, "\"audio-codec\" phandle missing or " > + "invalid\n"); > + ret = -EINVAL; > + goto sai_np_fail; > + } > + fsl_sgtl5000_dai.codec_of_node = codec_np; > + > + codec_dev = of_find_i2c_device_by_node(codec_np); > + if (!codec_dev) { > + dev_err(&pdev->dev, "failed to find codec platform device\n"); > + ret = PTR_ERR(codec_dev); > + goto codec_np_fail; > + } > + > + codec_clk = devm_clk_get(&codec_dev->dev, NULL); > + if (IS_ERR(codec_clk)) { > + dev_err(&pdev->dev, "failed to get codec clock\n"); > + ret = PTR_ERR(codec_clk); > + goto codec_np_fail; > + } > + > + sysclk_rate = clk_get_rate(codec_clk); > + > +codec_np_fail: > + of_node_put(codec_np); > +sai_np_fail: > + of_node_put(sai_np); > + > + return ret; > +} > + > +static int fsl_sgtl5000_probe(struct platform_device *pdev) > +{ > + int ret; > + > + fsl_sgt1500_card.dev = &pdev->dev; > + > + ret = fsl_sgtl5000_parse_dt(pdev); > + if (ret) { > + dev_err(&pdev->dev, > + "parse sgtl5000 device tree failed :%d\n", > + ret); > + return ret; > + } > + > + ret = devm_snd_soc_register_card(&pdev->dev, &fsl_sgt1500_card); > + if (ret) { > + dev_err(&pdev->dev, "register soc sound card failed :%d\n", > + ret); > + return ret; > + } > + > + return 0; > +} > + > +static int fsl_sgtl5000_remove(struct platform_device *pdev) > +{ > + snd_soc_unregister_card(&fsl_sgt1500_card); > + > + return 0; > +} > + > +static const struct of_device_id fsl_sgtl5000_dt_ids[] = { > + { .compatible = "fsl,vf610-sgtl5000", }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, fsl_sgtl5000_dt_ids); > + > +static struct platform_driver fsl_sgtl5000_driver = { > + .driver = { > + .name = "fsl-sgtl5000", > + .owner = THIS_MODULE, > + .of_match_table = fsl_sgtl5000_dt_ids, > + }, > + .probe = fsl_sgtl5000_probe, > + .remove = fsl_sgtl5000_remove, > +}; > +module_platform_driver(fsl_sgtl5000_driver); > + > +MODULE_AUTHOR("Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>"); > +MODULE_DESCRIPTION("Freescale SGTL5000 ASoC driver"); > +MODULE_LICENSE("GPL"); > -- > 1.8.4 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html