On Mon, Nov 30, 2015 at 10:59:47AM -0500, Damien Riegel wrote:
> Currently syscon has a fixed configuration of 32 bits for register and
> values widths. In some cases, it would be desirable to be able to
> customize the value width.
>
> For example, certain boards (like the ones manufactured by Technologic
> Systems) have a FPGA that is memory-mapped, but its registers are only
> 16-bit wide.
>
> This patch adds an optional "reg-io-width" DT binding for syscon that
> allows to change the width for the data bus (i.e. val_bits). If this
> property is provided, it will also set the register stride to
> reg-io-width's value. If not provided, the default configuration is
> used.
>
> Signed-off-by: Damien Riegel <damien.riegel@xxxxxxxxxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/mfd/syscon.txt | 4 ++++
> drivers/mfd/syscon.c | 13 +++++++++++++
> 2 files changed, 17 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt
> index fe8150b..408f768 100644
> --- a/Documentation/devicetree/bindings/mfd/syscon.txt
> +++ b/Documentation/devicetree/bindings/mfd/syscon.txt
> @@ -13,6 +13,10 @@ Required properties:
> - compatible: Should contain "syscon".
> - reg: the register region can be accessed from syscon
>
> +Optional property:
> +- reg-io-width: the size (in bytes) of the IO accesses that should be
> + performed on the device.
> +
> Examples:
> gpr: iomuxc-gpr@020e0000 {
> compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
> diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
> index 176bf0f..b7aabee 100644
> --- a/drivers/mfd/syscon.c
> +++ b/drivers/mfd/syscon.c
> @@ -47,6 +47,7 @@ static struct syscon *of_syscon_register(struct device_node *np)
> struct syscon *syscon;
> struct regmap *regmap;
> void __iomem *base;
> + u32 reg_io_width;
> int ret;
> struct regmap_config syscon_config = syscon_regmap_config;
>
> @@ -69,6 +70,18 @@ static struct syscon *of_syscon_register(struct device_node *np)
> else if (of_property_read_bool(np, "little-endian"))
> syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE;
>
> + /*
> + * search for reg-io-width property in DT. If it is not provided,
> + * default to 4 bytes. regmap_init_mmio will return an error if values
> + * are invalid so there is no need to check them here.
> + */
> + ret = of_property_read_u32(np, "reg-io-width", ®_io_width);
> + if (ret)
> + reg_io_width = 4;
> +
> + syscon_config.reg_stride = reg_io_width;
> + syscon_config.val_bits = reg_io_width * 8;
> +
> regmap = regmap_init_mmio(NULL, base, &syscon_config);
> if (IS_ERR(regmap)) {
> pr_err("regmap init failed\n");
> --
> 2.5.0
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
