Re: [linux-sunxi] Re: [PATCH v3 1/2] phy-sun4i-usb: Use of_match_node to get model specific config data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

On 26-11-15 05:22, Chen-Yu Tsai wrote:
On Thu, Nov 26, 2015 at 12:50 AM, Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
Use of_match_node instead of calling of_device_is_compatible a ton of
times to get model specific config data.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v3:
-New patch in v3 of this patch-set
---
  drivers/phy/phy-sun4i-usb.c | 130 +++++++++++++++++++++++++++++---------------
  1 file changed, 85 insertions(+), 45 deletions(-)

diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index b12964b..1d8f85d 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -88,12 +88,22 @@
  #define DEBOUNCE_TIME                  msecs_to_jiffies(50)
  #define POLL_TIME                      msecs_to_jiffies(250)

+enum sun4i_usb_phy_type {
+       sun4i_a10_phy,
+       sun8i_a33_phy,
+};
+
+struct sun4i_usb_phy_cfg {
+       int num_phys;
+       u32 disc_thresh;
+       enum sun4i_usb_phy_type type;
+       bool dedicated_clocks;
+};
+
  struct sun4i_usb_phy_data {
         void __iomem *base;
+       const struct sun4i_usb_phy_cfg *cfg;
         struct mutex mutex;
-       int num_phys;
-       u32 disc_thresh;
-       bool has_a33_phyctl;
         struct sun4i_usb_phy {
                 struct phy *phy;
                 void __iomem *pmu;
@@ -164,12 +174,15 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,

         mutex_lock(&phy_data->mutex);

-       if (phy_data->has_a33_phyctl) {
+       switch (phy_data->cfg->type) {
+       case sun4i_a10_phy:
+               phyctl = phy_data->base + REG_PHYCTL_A10;

Any reason why this offset isn't incorporated into phy_data?

You mean in phy_data->cfg I assume, the difference needed for
the "sun4i_usb_phy_write" functionality are not just the phyctl
register offset...


+               break;
+       case sun8i_a33_phy:
                 phyctl = phy_data->base + REG_PHYCTL_A33;
                 /* A33 needs us to set phyctl to 0 explicitly */
                 writel(0, phyctl);

e.g. the A33 needs this extra write, and on the H3 we need to do
similar bitbanging, but slightly different, see:

https://github.com/allwinner-zh/linux-3.4-sunxi/blob/master/drivers/usb/host/sunxi_hci.c#L899

Notice how it uses different addr and write register addresses
their through the usb_phy_csr_add and usb_phy_csr_write helper
functions as well as directly poking offset 0x20.

My current H3 usb-phy support patches do not deal with this,
as the h3 sdk code posted by the orange-pi people never calls
this function, so we do not need to worry about implementing
sun4i_usb_phy_write for H3, but if we ever want to tweak
lowlevel phy settings, and/or for the A83 we likely need to
implement a whole different sun4i_usb_phy_write code-path for
the H3/A83.

So it seems better to just have phy_data->cfg->type and deal
with any SoC specific differences on that, as there are more
differences to deal with then just the phyctl register offset.

Regards,

Hans




-       } else {
-               phyctl = phy_data->base + REG_PHYCTL_A10;
+               break;
         }

         for (i = 0; i < len; i++) {
@@ -249,7 +262,8 @@ static int sun4i_usb_phy_init(struct phy *_phy)
         sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);

         /* Disconnect threshold adjustment */
-       sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, data->disc_thresh, 2);
+       sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
+                           data->cfg->disc_thresh, 2);

         sun4i_usb_phy_passby(phy, 1);

@@ -476,7 +490,7 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
  {
         struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);

-       if (args->args[0] >= data->num_phys)
+       if (args->args[0] >= data->cfg->num_phys)
                 return ERR_PTR(-ENODEV);

         return data->phys[args->args[0]].phy;
@@ -499,6 +513,59 @@ static int sun4i_usb_phy_remove(struct platform_device *pdev)
         return 0;
  }

+static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
+       .num_phys = 3,
+       .disc_thresh = 3,
+       .type = sun4i_a10_phy,
+       .dedicated_clocks = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
+       .num_phys = 2,
+       .disc_thresh = 2,
+       .type = sun4i_a10_phy,
+       .dedicated_clocks = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
+       .num_phys = 3,
+       .disc_thresh = 3,
+       .type = sun4i_a10_phy,
+       .dedicated_clocks = true,
+};
+
+static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
+       .num_phys = 3,
+       .disc_thresh = 2,
+       .type = sun4i_a10_phy,
+       .dedicated_clocks = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
+       .num_phys = 2,
+       .disc_thresh = 3,
+       .type = sun4i_a10_phy,
+       .dedicated_clocks = true,
+};
+
+static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
+       .num_phys = 2,
+       .disc_thresh = 3,
+       .type = sun8i_a33_phy,
+       .dedicated_clocks = true,
+};
+
+static const struct of_device_id sun4i_usb_phy_of_match[] = {
+       { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
+       { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
+       { .compatible = "allwinner,sun6i-a31-usb-phy", .data = &sun6i_a31_cfg },
+       { .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
+       { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
+       { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
+       { },
+};
+MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
+
  static const unsigned int sun4i_usb_phy0_cable[] = {
         EXTCON_USB,
         EXTCON_USB_HOST,
@@ -511,10 +578,16 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
         struct device *dev = &pdev->dev;
         struct device_node *np = dev->of_node;
         struct phy_provider *phy_provider;
-       bool dedicated_clocks;
+       const struct of_device_id *match;
         struct resource *res;
         int i, ret;

+       match = of_match_node(sun4i_usb_phy_of_match, dev->of_node);

You can use of_device_get_match_data() for slightly less code. This
will also let you keep the of_device_id table where it was, at the
bottom.

+       if (!match) {

I'm working on something similar in the axp20x driver. Is there any
case of_match_node or of_device_get_match_data can fail?


Regards
ChenYu

+               dev_err(dev, "of_match_node() failed\n");
+               return -EINVAL;
+       }
+
         data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
         if (!data)
                 return -ENOMEM;
@@ -522,29 +595,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
         mutex_init(&data->mutex);
         INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan);
         dev_set_drvdata(dev, data);
-
-       if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy") ||
-           of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy") ||
-           of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy"))
-               data->num_phys = 2;
-       else
-               data->num_phys = 3;
-
-       if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy") ||
-           of_device_is_compatible(np, "allwinner,sun7i-a20-usb-phy"))
-               data->disc_thresh = 2;
-       else
-               data->disc_thresh = 3;
-
-       if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy") ||
-           of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy") ||
-           of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy"))
-               dedicated_clocks = true;
-       else
-               dedicated_clocks = false;
-
-       if (of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy"))
-               data->has_a33_phyctl = true;
+       data->cfg = match->data;

         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
         data->base = devm_ioremap_resource(dev, res);
@@ -590,7 +641,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
                 }
         }

-       for (i = 0; i < data->num_phys; i++) {
+       for (i = 0; i < data->cfg->num_phys; i++) {
                 struct sun4i_usb_phy *phy = data->phys + i;
                 char name[16];

@@ -602,7 +653,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
                         phy->vbus = NULL;
                 }

-               if (dedicated_clocks)
+               if (data->cfg->dedicated_clocks)
                         snprintf(name, sizeof(name), "usb%d_phy", i);
                 else
                         strlcpy(name, "usb_phy", sizeof(name));
@@ -689,17 +740,6 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
         return 0;
  }

-static const struct of_device_id sun4i_usb_phy_of_match[] = {
-       { .compatible = "allwinner,sun4i-a10-usb-phy" },
-       { .compatible = "allwinner,sun5i-a13-usb-phy" },
-       { .compatible = "allwinner,sun6i-a31-usb-phy" },
-       { .compatible = "allwinner,sun7i-a20-usb-phy" },
-       { .compatible = "allwinner,sun8i-a23-usb-phy" },
-       { .compatible = "allwinner,sun8i-a33-usb-phy" },
-       { },
-};
-MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
-
  static struct platform_driver sun4i_usb_phy_driver = {
         .probe  = sun4i_usb_phy_probe,
         .remove = sun4i_usb_phy_remove,
--
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux