On Wed, 2015-11-18 at 18:34 +0100, Philipp Zabel wrote: > These muxes are supposed to select a fitting divider after the PLL > is already set to the correct rate. > > Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> Acked-by: James Liao <jamesjj.liao@xxxxxxxxxxxx> > --- > drivers/clk/mediatek/clk-mt8173.c | 4 ++-- > drivers/clk/mediatek/clk-mtk.h | 7 +++++-- > 2 files changed, 7 insertions(+), 4 deletions(-) > > diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c > index 227e356..b305fa2 100644 > --- a/drivers/clk/mediatek/clk-mt8173.c > +++ b/drivers/clk/mediatek/clk-mt8173.c > @@ -558,7 +558,7 @@ static const struct mtk_composite top_muxes[] __initconst = { > MUX_GATE(CLK_TOP_ATB_SEL, "atb_sel", atb_parents, 0x0090, 16, 2, 23), > MUX_GATE(CLK_TOP_VENC_LT_SEL, "venclt_sel", venc_lt_parents, 0x0090, 24, 4, 31), > /* CLK_CFG_6 */ > - MUX_GATE(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7), > + MUX_GATE_FLAGS(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7, 0), > MUX_GATE(CLK_TOP_IRDA_SEL, "irda_sel", irda_parents, 0x00a0, 8, 2, 15), > MUX_GATE(CLK_TOP_CCI400_SEL, "cci400_sel", cci400_parents, 0x00a0, 16, 3, 23), > MUX_GATE(CLK_TOP_AUD_1_SEL, "aud_1_sel", aud_1_parents, 0x00a0, 24, 2, 31), > @@ -569,7 +569,7 @@ static const struct mtk_composite top_muxes[] __initconst = { > MUX_GATE(CLK_TOP_SCAM_SEL, "scam_sel", scam_parents, 0x00b0, 24, 2, 31), > /* CLK_CFG_12 */ > MUX_GATE(CLK_TOP_SPINFI_IFR_SEL, "spinfi_ifr_sel", spinfi_ifr_parents, 0x00c0, 0, 3, 7), > - MUX_GATE(CLK_TOP_HDMI_SEL, "hdmi_sel", hdmi_parents, 0x00c0, 8, 2, 15), > + MUX_GATE_FLAGS(CLK_TOP_HDMI_SEL, "hdmi_sel", hdmi_parents, 0x00c0, 8, 2, 15, 0), > MUX_GATE(CLK_TOP_DPILVDS_SEL, "dpilvds_sel", dpilvds_parents, 0x00c0, 24, 3, 31), > /* CLK_CFG_13 */ > MUX_GATE(CLK_TOP_MSDC50_2_H_SEL, "msdc50_2_h_sel", msdc50_2_h_parents, 0x00d0, 0, 3, 7), > diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h > index 32d2e45..b607996 100644 > --- a/drivers/clk/mediatek/clk-mtk.h > +++ b/drivers/clk/mediatek/clk-mtk.h > @@ -83,7 +83,7 @@ struct mtk_composite { > signed char num_parents; > }; > > -#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) { \ > +#define MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, _flags) { \ > .id = _id, \ > .name = _name, \ > .mux_reg = _reg, \ > @@ -94,9 +94,12 @@ struct mtk_composite { > .divider_shift = -1, \ > .parent_names = _parents, \ > .num_parents = ARRAY_SIZE(_parents), \ > - .flags = CLK_SET_RATE_PARENT, \ > + .flags = _flags, \ > } > > +#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) \ > + MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, CLK_SET_RATE_PARENT) > + > #define MUX(_id, _name, _parents, _reg, _shift, _width) { \ > .id = _id, \ > .name = _name, \ -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html