usb1_drvvbus pin is used to Drive-VBUS enable to external charge
pump/power switch.
Add a pinmux for that pin.
Signed-off-by: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
Acked-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/am57xx-sbc-am57x.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
index 67e7f4a..b92650b 100644
--- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
@@ -38,6 +38,12 @@
DRA7XX_CORE_IOPAD(0x3770, PIN_INPUT | MUX_MODE14) /* mmc1_sdwp.gpio6_28 */
>;
};
+
+ usb1_pins: pinmux_usb1_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ >;
+ };
};
&uart3 {
@@ -60,3 +66,8 @@
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
