The properties specified in the wled node could harm connected hardware, so move the properties to Honami and disable the platform node. Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 13 +++++++++++++ arch/arm/boot/dts/qcom-pm8941.dtsi | 9 ++------- 2 files changed, 15 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index 37741725b7bd..a0398b69f4f2 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -403,4 +403,17 @@ qcom,vset-millivolts = <3000>; }; }; + + pm8941@1 { + wled@d800 { + status = "ok"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index b0d443999fcc..b73fee57cf18 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -159,17 +159,12 @@ #address-cells = <1>; #size-cells = <0>; - wled@d800 { + pm8941_wled: wled@d800 { compatible = "qcom,pm8941-wled"; reg = <0xd800 0x100>; label = "backlight"; - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; + status = "disabled"; }; }; }; -- 2.4.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html