On Mon, 21 Sep 2015, Andrew F. Davis wrote: > Fix the incorrect interrupt documentation file path in binding docs. > > Signed-off-by: Andrew F. Davis <afd@xxxxxx> > --- > Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt | 2 +- > Documentation/devicetree/bindings/mfd/arizona.txt | 2 +- > Documentation/devicetree/bindings/mfd/palmas.txt | 2 +- > Documentation/devicetree/bindings/sound/wm8994.txt | 2 +- > 4 files changed, 4 insertions(+), 4 deletions(-) Applied, thanks. > diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt > index dd5d2c0..4d6c8cd 100644 > --- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt > +++ b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt > @@ -24,7 +24,7 @@ controller. > - #interrupt-cells : Specifies the number of cells needed to encode an > interrupt. Shall be set to 2. The first cell defines the interrupt number, > the second encodes the triger flags encoded as described in > - Documentation/devicetree/bindings/interrupts.txt > + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt > - interrupt-parent : The parent interrupt controller. > - interrupts : The interrupt to the parent controller raised when GPIOs > generate the interrupts. > diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt > index a8fee60..3d361ec 100644 > --- a/Documentation/devicetree/bindings/mfd/arizona.txt > +++ b/Documentation/devicetree/bindings/mfd/arizona.txt > @@ -24,7 +24,7 @@ Required properties: > - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. > The first cell is the IRQ number. > The second cell is the flags, encoded as the trigger masks from > - Documentation/devicetree/bindings/interrupts.txt > + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt > > - gpio-controller : Indicates this device is a GPIO controller. > - #gpio-cells : Must be 2. The first cell is the pin number and the > diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt > index eda8989..8ae1a32 100644 > --- a/Documentation/devicetree/bindings/mfd/palmas.txt > +++ b/Documentation/devicetree/bindings/mfd/palmas.txt > @@ -24,7 +24,7 @@ and also the generic series names > - #interrupt-cells : should be set to 2 for IRQ number and flags > The first cell is the IRQ number. > The second cell is the flags, encoded as the trigger masks from > - Documentation/devicetree/bindings/interrupts.txt > + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt > - interrupt-parent : The parent interrupt controller. > > Optional properties: > diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt > index e045e90..68c4e8d 100644 > --- a/Documentation/devicetree/bindings/sound/wm8994.txt > +++ b/Documentation/devicetree/bindings/sound/wm8994.txt > @@ -30,7 +30,7 @@ Optional properties: > - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. > The first cell is the IRQ number. > The second cell is the flags, encoded as the trigger masks from > - Documentation/devicetree/bindings/interrupts.txt > + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt > > - clocks : A list of up to two phandle and clock specifier pairs > - clock-names : A list of clock names sorted in the same order as clocks. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
