Re: [PATCH 1/2] arm64: dts: berlin4ct: add I2C nodes for BG4CT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, 20 Nov 2015 22:21:55 +0100
Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> wrote:

> On 20.11.2015 10:47, Jisheng Zhang wrote:
> > The Marvell Berlin BG4CT SoC has 4 TWSI which are compatible with the
> > Synopsys DesignWare I2C driver. Add the corresponding nodes.
> > 
> > Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 52 ++++++++++++++++++++++++++++++
> >  1 file changed, 52 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> > index cca4c41..39d0676 100644
> > --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> > +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> > @@ -232,6 +232,32 @@
> >  				};
> >  			};
> >  
> > +			i2c0: i2c@1400 {
> > +				compatible = "snps,designware-i2c";
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +				reg = <0x1400 0x100>;
> > +				clocks = <&clk CLK_APBCORE>;  
> 
> This patch looks fine to me, except that clock node naming and
> clock indices may change. We should really postpone this series
> until we worked out clock.

Indeed. This is just to sent out for review early, so that we can merge
the i2c support once clk is ready.

Thanks for review,
Jisheng

> 
> Sebastian
> 
> > +				i2c-sda-hold-time-ns = <35>;
> > +				i2c-sda-falling-time-ns = <425>;
> > +				i2c-scl-falling-time-ns = <205>;
> > +				interrupts = <4>;
> > +				status = "disabled";
> > +			};
> > +
> > +			i2c1: i2c@1800 {
> > +				compatible = "snps,designware-i2c";
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +				reg = <0x1800 0x100>;
> > +				clocks = <&clk CLK_APBCORE>;
> > +				i2c-sda-hold-time-ns = <35>;
> > +				i2c-sda-falling-time-ns = <425>;
> > +				i2c-scl-falling-time-ns = <205>;
> > +				interrupts = <5>;
> > +				status = "disabled";
> > +			};
> > +
> >  			aic: interrupt-controller@3800 {
> >  				compatible = "snps,dw-apb-ictl";
> >  				reg = <0x3800 0x30>;
> > @@ -319,6 +345,32 @@
> >  				};
> >  			};
> >  
> > +			i2c2: i2c@b000 {
> > +				compatible = "snps,designware-i2c";
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +				reg = <0xb000 0x100>;
> > +				clocks = <&osc>;
> > +				i2c-sda-hold-time-ns = <140>;
> > +				i2c-sda-falling-time-ns = <500>;
> > +				i2c-scl-falling-time-ns = <220>;
> > +				interrupts = <6>;
> > +				status = "disabled";
> > +			};
> > +
> > +			i2c3: i2c@c000 {
> > +				compatible = "snps,designware-i2c";
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +				reg = <0xc000 0x100>;
> > +				clocks = <&osc>;
> > +				i2c-sda-hold-time-ns = <140>;
> > +				i2c-sda-falling-time-ns = <500>;
> > +				i2c-scl-falling-time-ns = <220>;
> > +				interrupts = <7>;
> > +				status = "disabled";
> > +			};
> > +
> >  			uart0: uart@d000 {
> >  				compatible = "snps,dw-apb-uart";
> >  				reg = <0xd000 0x100>;
> >   
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux