Re: [PATCH v8 4/8] mfd: fsl imx25 Touchscreen ADC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 21/11/15 17:02, Jonathan Cameron wrote:
> On 16/11/15 12:01, Markus Pargmann wrote:
>> This is the core driver for imx25 touchscreen/adc driver. The module
>> has one shared ADC and two different conversion queues which use the
>> ADC. The two queues are identical. Both can be used for general purpose
>> ADC but one is meant to be used for touchscreens.
>>
>> This driver is the core which manages the central components and
>> registers of the TSC/ADC unit. It manages the IRQs and forwards them to
>> the correct components.
>>
>> Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
>> Signed-off-by: Denis Carikli <denis@xxxxxxxxxx>
>>
>> [ensure correct ADC clock depending on the IPG clock]
>> Signed-off-by: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
> Looks good to me - one query on meaning of a comment inline.
> 
> Acked-by: Jonathan Cameron <jic23@xxxxxxxxxx>
> 
> I'm taking the view this series wants to go through the MFD tree
> but don't mind if it goes through IIO or input instead
> if there is a good reason to do so.
> 
> Jonathan
>> ---
>>
>> Notes:
>>     Changes in v7:
>>      - Cleanup bit defines in header files to be more readable
>>      - Fix irq check to return with an error for irq <= 0
>>      - Add COMPILE_TEST in Kconfig file
>>     
>>     Changes in v5:
>>      - Remove ifdef CONFIG_OF as this driver is only for DT usage
>>      - Remove module owner
>>      - Add Kconfig dependencies ARCH_MX25 and OF
>>     
>>     @Jonathan Cameron:
>>     I left your acked-by on the patch as these were small changes. If it should be
>>     removed, please say so. Thanks
>>
>>  drivers/mfd/Kconfig             |   9 ++
>>  drivers/mfd/Makefile            |   2 +
>>  drivers/mfd/fsl-imx25-tsadc.c   | 204 ++++++++++++++++++++++++++++++++++++++++
>>  include/linux/mfd/imx25-tsadc.h | 140 +++++++++++++++++++++++++++
>>  4 files changed, 355 insertions(+)
>>  create mode 100644 drivers/mfd/fsl-imx25-tsadc.c
>>  create mode 100644 include/linux/mfd/imx25-tsadc.h
>>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index 4d92df6ef9fe..4222e202ad2b 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -271,6 +271,15 @@ config MFD_MC13XXX_I2C
>>  	help
>>  	  Select this if your MC13xxx is connected via an I2C bus.
>>  
>> +config MFD_MX25_TSADC
>> +	tristate "Freescale i.MX25 integrated Touchscreen and ADC unit"
>> +	select REGMAP_MMIO
>> +	depends on (SOC_IMX25 && OF) || COMPILE_TEST
>> +	help
>> +	  Enable support for the integrated Touchscreen and ADC unit of the
>> +	  i.MX25 processors. They consist of a conversion queue for general
>> +	  purpose ADC and a queue for Touchscreens.
>> +
>>  config MFD_HI6421_PMIC
>>  	tristate "HiSilicon Hi6421 PMU/Codec IC"
>>  	depends on OF
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index a8b76b81b467..5741be88c173 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -81,6 +81,8 @@ obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
>>  obj-$(CONFIG_MFD_TWL4030_AUDIO)	+= twl4030-audio.o
>>  obj-$(CONFIG_TWL6040_CORE)	+= twl6040.o
>>  
>> +obj-$(CONFIG_MFD_MX25_TSADC)	+= fsl-imx25-tsadc.o
>> +
>>  obj-$(CONFIG_MFD_MC13XXX)	+= mc13xxx-core.o
>>  obj-$(CONFIG_MFD_MC13XXX_SPI)	+= mc13xxx-spi.o
>>  obj-$(CONFIG_MFD_MC13XXX_I2C)	+= mc13xxx-i2c.o
>> diff --git a/drivers/mfd/fsl-imx25-tsadc.c b/drivers/mfd/fsl-imx25-tsadc.c
>> new file mode 100644
>> index 000000000000..e67d5ca81e10
>> --- /dev/null
>> +++ b/drivers/mfd/fsl-imx25-tsadc.c
>> @@ -0,0 +1,204 @@
>> +/*
>> + * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@xxxxxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it under
>> + * the terms of the GNU General Public License version 2 as published by the
>> + * Free Software Foundation.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/irqchip/chained_irq.h>
>> +#include <linux/irqdesc.h>
>> +#include <linux/irqdomain.h>
>> +#include <linux/irq.h>
>> +#include <linux/mfd/imx25-tsadc.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +
>> +static struct regmap_config mx25_tsadc_regmap_config = {
>> +	.fast_io = true,
>> +	.max_register = 8,
>> +	.reg_bits = 32,
>> +	.val_bits = 32,
>> +	.reg_stride = 4,
>> +};
>> +
>> +static void mx25_tsadc_irq_handler(struct irq_desc *desc)
>> +{
>> +	struct mx25_tsadc *tsadc = irq_desc_get_handler_data(desc);
>> +	struct irq_chip *chip = irq_desc_get_chip(desc);
>> +	u32 status;
>> +
>> +	chained_irq_enter(chip, desc);
>> +
>> +	regmap_read(tsadc->regs, MX25_TSC_TGSR, &status);
>> +
>> +	if (status & MX25_TGSR_GCQ_INT)
>> +		generic_handle_irq(irq_find_mapping(tsadc->domain, 1));
>> +
>> +	if (status & MX25_TGSR_TCQ_INT)
>> +		generic_handle_irq(irq_find_mapping(tsadc->domain, 0));
>> +
>> +	chained_irq_exit(chip, desc);
>> +}
>> +
>> +static int mx25_tsadc_domain_map(struct irq_domain *d, unsigned int irq,
>> +				 irq_hw_number_t hwirq)
>> +{
>> +	struct mx25_tsadc *tsadc = d->host_data;
>> +
>> +	irq_set_chip_data(irq, tsadc);
>> +	irq_set_chip_and_handler(irq, &dummy_irq_chip,
>> +				 handle_level_irq);
>> +	irq_modify_status(irq, IRQ_NOREQUEST, IRQ_NOPROBE);
>> +
>> +	return 0;
>> +}
>> +
>> +static struct irq_domain_ops mx25_tsadc_domain_ops = {
>> +	.map = mx25_tsadc_domain_map,
>> +	.xlate = irq_domain_xlate_onecell,
>> +};
>> +
>> +static int mx25_tsadc_setup_irq(struct platform_device *pdev,
>> +				struct mx25_tsadc *tsadc)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct device_node *np = dev->of_node;
>> +	int irq;
>> +
>> +	irq = platform_get_irq(pdev, 0);
>> +	if (irq <= 0) {
>> +		dev_err(dev, "Failed to get irq\n");
>> +		return irq;
>> +	}
>> +
>> +	tsadc->domain = irq_domain_add_simple(np, 2, 0, &mx25_tsadc_domain_ops,
>> +					      tsadc);
>> +	if (!tsadc->domain) {
>> +		dev_err(dev, "Failed to add irq domain\n");
>> +		return -ENOMEM;
>> +	}
>> +
>> +	irq_set_chained_handler(irq, mx25_tsadc_irq_handler);
>> +	irq_set_handler_data(irq, tsadc);
>> +
>> +	return 0;
>> +}
>> +
>> +static void mx25_tsadc_setup_clk(struct platform_device *pdev,
>> +				 struct mx25_tsadc *tsadc)
>> +{
>> +	unsigned clk_div;
>> +
>> +	/*
>> +	 * According to the datasheet the ADC clock should never
>> +	 * exceed 1,75 MHz. Base clock is the IPG and the ADC unit uses
>> +	 * a funny clock divider. To keep the time constant the ADC needs to do
>> +	 * one conversion, adapt the ADC internal clock divider to
>> +	 * the available IPG
> I'm not entirely following this explanation...
> maybe
> 
> ...one conversion, then adapt the ADC...
> 
>> +	 */
>> +
>> +	dev_dbg(&pdev->dev, "Found master clock at %lu Hz\n",
>> +		clk_get_rate(tsadc->clk));
>> +
>> +	clk_div = DIV_ROUND_UP(clk_get_rate(tsadc->clk), 1750000);
>> +	dev_dbg(&pdev->dev, "Setting up ADC clock divider to %u\n", clk_div);
>> +
>> +	/* adc clock = IPG clock / (2 * div + 2) */
>> +	clk_div -= 2;
>> +	clk_div /= 2;
>> +
>> +	/*
>> +	 * the ADC clock divider changes its behaviour when values below 4
>> +	 * are used: it is fixed to "/ 10" in this case
>> +	 */
>> +	clk_div = max_t(unsigned, 4, clk_div);
>> +
>> +	dev_dbg(&pdev->dev, "Resulting ADC conversion clock at %lu Hz\n",
>> +		clk_get_rate(tsadc->clk) / (2 * clk_div + 2));
>> +
>> +	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR,
>> +			   MX25_TGCR_ADCCLKCFG(0x1f),
>> +			   MX25_TGCR_ADCCLKCFG(clk_div));
>> +}
>> +
>> +static int mx25_tsadc_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct device_node *np = dev->of_node;
>> +	struct mx25_tsadc *tsadc;
>> +	struct resource *res;
>> +	int ret;
>> +	void __iomem *iomem;
>> +
>> +	tsadc = devm_kzalloc(dev, sizeof(*tsadc), GFP_KERNEL);
>> +	if (!tsadc)
>> +		return -ENOMEM;
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	iomem = devm_ioremap_resource(dev, res);
>> +	if (IS_ERR(iomem))
>> +		return PTR_ERR(iomem);
>> +
>> +	tsadc->regs = devm_regmap_init_mmio(dev, iomem,
>> +					    &mx25_tsadc_regmap_config);
>> +	if (IS_ERR(tsadc->regs)) {
>> +		dev_err(dev, "Failed to initialize regmap\n");
>> +		return PTR_ERR(tsadc->regs);
>> +	}
>> +
>> +	tsadc->clk = devm_clk_get(dev, "ipg");
>> +	if (IS_ERR(tsadc->clk)) {
>> +		dev_err(dev, "Failed to get ipg clock\n");
>> +		return PTR_ERR(tsadc->clk);
>> +	}
>> +
>> +	/* setup clock according to the datasheet */
>> +	mx25_tsadc_setup_clk(pdev, tsadc);
>> +
>> +	/* Enable clock and reset the component */
>> +	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_CLK_EN,
>> +			   MX25_TGCR_CLK_EN);
>> +	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_TSC_RST,
>> +			   MX25_TGCR_TSC_RST);
>> +
>> +	/* Setup powersaving mode, but enable internal reference voltage */
>> +	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_POWERMODE_MASK,
>> +			   MX25_TGCR_POWERMODE_SAVE);
>> +	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_INTREFEN,
>> +			   MX25_TGCR_INTREFEN);
>> +
>> +	ret = mx25_tsadc_setup_irq(pdev, tsadc);
>> +	if (ret)
>> +		return ret;
>> +
>> +	platform_set_drvdata(pdev, tsadc);
>> +
>> +	of_platform_populate(np, NULL, NULL, dev);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id mx25_tsadc_ids[] = {
>> +	{ .compatible = "fsl,imx25-tsadc" },
>> +	{ /* Sentinel */ }
>> +};
>> +
>> +static struct platform_driver mx25_tsadc_driver = {
>> +	.driver = {
>> +		.name = "mx25-tsadc",
>> +		.of_match_table = of_match_ptr(mx25_tsadc_ids),
>> +	},
>> +	.probe = mx25_tsadc_probe,
>> +};
>> +module_platform_driver(mx25_tsadc_driver);
>> +
>> +MODULE_DESCRIPTION("MFD for ADC/TSC for Freescale mx25");
>> +MODULE_AUTHOR("Markus Pargmann <mpa@xxxxxxxxxxxxxx>");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_ALIAS("platform:mx25-tsadc");
>> diff --git a/include/linux/mfd/imx25-tsadc.h b/include/linux/mfd/imx25-tsadc.h
>> new file mode 100644
>> index 000000000000..7fe4b8c3baac
>> --- /dev/null
>> +++ b/include/linux/mfd/imx25-tsadc.h
>> @@ -0,0 +1,140 @@
>> +#ifndef _LINUX_INCLUDE_MFD_IMX25_TSADC_H_
>> +#define _LINUX_INCLUDE_MFD_IMX25_TSADC_H_
>> +
>> +struct regmap;
>> +struct clk;
>> +
>> +struct mx25_tsadc {
>> +	struct regmap *regs;
>> +	struct irq_domain *domain;
>> +	struct clk *clk;
>> +};
>> +
>> +#define MX25_TSC_TGCR			0x00
>> +#define MX25_TSC_TGSR			0x04
>> +#define MX25_TSC_TICR			0x08
>> +
>> +/* The same register layout for TC and GC queue */
>> +#define MX25_ADCQ_FIFO			0x00
>> +#define MX25_ADCQ_CR			0x04
>> +#define MX25_ADCQ_SR			0x08
>> +#define MX25_ADCQ_MR			0x0c
>> +#define MX25_ADCQ_ITEM_7_0		0x20
>> +#define MX25_ADCQ_ITEM_15_8		0x24
>> +#define MX25_ADCQ_CFG(n)		(0x40 + ((n) * 0x4))
>> +
>> +#define MX25_ADCQ_MR_MASK		0xffffffff
>> +
>> +/* TGCR */
>> +#define MX25_TGCR_PDBTIME(x)		((x) << 25)
>> +#define MX25_TGCR_PDBTIME_MASK		GENMASK(31, 25)
>> +#define MX25_TGCR_PDBEN			BIT(24)
>> +#define MX25_TGCR_PDEN			BIT(23)
>> +#define MX25_TGCR_ADCCLKCFG(x)		((x) << 16)
>> +#define MX25_TGCR_GET_ADCCLK(x)		(((x) >> 16) & 0x1f)
>> +#define MX25_TGCR_INTREFEN		BIT(10)
>> +#define MX25_TGCR_POWERMODE_MASK	GENMASK(9, 8)
>> +#define MX25_TGCR_POWERMODE_SAVE	(1 << 8)
>> +#define MX25_TGCR_POWERMODE_ON		(2 << 8)
>> +#define MX25_TGCR_STLC			BIT(5)
>> +#define MX25_TGCR_SLPC			BIT(4)
>> +#define MX25_TGCR_FUNC_RST		BIT(2)
>> +#define MX25_TGCR_TSC_RST		BIT(1)
>> +#define MX25_TGCR_CLK_EN		BIT(0)
>> +
>> +/* TGSR */
>> +#define MX25_TGSR_SLP_INT		BIT(2)
>> +#define MX25_TGSR_GCQ_INT		BIT(1)
>> +#define MX25_TGSR_TCQ_INT		BIT(0)
>> +
>> +/* ADCQ_ITEM_* */
>> +#define _MX25_ADCQ_ITEM(item, x)	((x) << ((item) * 4))
>> +#define MX25_ADCQ_ITEM(item, x)		((item) >= 8 ? \
>> +		_MX25_ADCQ_ITEM((item) - 8, (x)) : _MX25_ADCQ_ITEM((item), (x)))
>> +
>> +/* ADCQ_FIFO (TCQFIFO and GCQFIFO) */
>> +#define MX25_ADCQ_FIFO_DATA(x)		(((x) >> 4) & 0xfff)
>> +#define MX25_ADCQ_FIFO_ID(x)		((x) & 0xf)
>> +
>> +/* ADCQ_CR (TCQR and GCQR) */
>> +#define MX25_ADCQ_CR_PDCFG_LEVEL	BIT(19)
>> +#define MX25_ADCQ_CR_PDMSK		BIT(18)
>> +#define MX25_ADCQ_CR_FRST		BIT(17)
>> +#define MX25_ADCQ_CR_QRST		BIT(16)
>> +#define MX25_ADCQ_CR_RWAIT_MASK		GENMASK(15, 12)
>> +#define MX25_ADCQ_CR_RWAIT(x)		((x) << 12)
>> +#define MX25_ADCQ_CR_WMRK_MASK		GENMASK(11, 8)
>> +#define MX25_ADCQ_CR_WMRK(x)		((x) << 8)
>> +#define MX25_ADCQ_CR_LITEMID_MASK	(0xf << 4)
>> +#define MX25_ADCQ_CR_LITEMID(x)		((x) << 4)
>> +#define MX25_ADCQ_CR_RPT		BIT(3)
>> +#define MX25_ADCQ_CR_FQS		BIT(2)
>> +#define MX25_ADCQ_CR_QSM_MASK		GENMASK(1, 0)
>> +#define MX25_ADCQ_CR_QSM_PD		0x1
>> +#define MX25_ADCQ_CR_QSM_FQS		0x2
>> +#define MX25_ADCQ_CR_QSM_FQS_PD		0x3
>> +
>> +/* ADCQ_SR (TCQSR and GCQSR) */
>> +#define MX25_ADCQ_SR_FDRY		BIT(15)
>> +#define MX25_ADCQ_SR_FULL		BIT(14)
>> +#define MX25_ADCQ_SR_EMPT		BIT(13)
>> +#define MX25_ADCQ_SR_FDN(x)		(((x) >> 8) & 0x1f)
>> +#define MX25_ADCQ_SR_FRR		BIT(6)
>> +#define MX25_ADCQ_SR_FUR		BIT(5)
>> +#define MX25_ADCQ_SR_FOR		BIT(4)
>> +#define MX25_ADCQ_SR_EOQ		BIT(1)
>> +#define MX25_ADCQ_SR_PD			BIT(0)
>> +
>> +/* ADCQ_MR (TCQMR and GCQMR) */
>> +#define MX25_ADCQ_MR_FDRY_DMA		BIT(31)
>> +#define MX25_ADCQ_MR_FER_DMA		BIT(22)
>> +#define MX25_ADCQ_MR_FUR_DMA		BIT(21)
>> +#define MX25_ADCQ_MR_FOR_DMA		BIT(20)
>> +#define MX25_ADCQ_MR_EOQ_DMA		BIT(17)
>> +#define MX25_ADCQ_MR_PD_DMA		BIT(16)
>> +#define MX25_ADCQ_MR_FDRY_IRQ		BIT(15)
>> +#define MX25_ADCQ_MR_FER_IRQ		BIT(6)
>> +#define MX25_ADCQ_MR_FUR_IRQ		BIT(5)
>> +#define MX25_ADCQ_MR_FOR_IRQ		BIT(4)
>> +#define MX25_ADCQ_MR_EOQ_IRQ		BIT(1)
>> +#define MX25_ADCQ_MR_PD_IRQ		BIT(0)
>> +
>> +/* ADCQ_CFG (TICR, TCC0-7,GCC0-7) */
>> +#define MX25_ADCQ_CFG_SETTLING_TIME(x)	((x) << 24)
>> +#define MX25_ADCQ_CFG_IGS		(1 << 20)
>> +#define MX25_ADCQ_CFG_NOS_MASK		GENMASK(19, 16)
>> +#define MX25_ADCQ_CFG_NOS(x)		(((x) - 1) << 16)
>> +#define MX25_ADCQ_CFG_WIPER		(1 << 15)
>> +#define MX25_ADCQ_CFG_YNLR		(1 << 14)
>> +#define MX25_ADCQ_CFG_YPLL_HIGH		(0 << 12)
>> +#define MX25_ADCQ_CFG_YPLL_OFF		(1 << 12)
>> +#define MX25_ADCQ_CFG_YPLL_LOW		(3 << 12)
>> +#define MX25_ADCQ_CFG_XNUR_HIGH		(0 << 10)
>> +#define MX25_ADCQ_CFG_XNUR_OFF		(1 << 10)
>> +#define MX25_ADCQ_CFG_XNUR_LOW		(3 << 10)
>> +#define MX25_ADCQ_CFG_XPUL_HIGH		(0 << 9)
>> +#define MX25_ADCQ_CFG_XPUL_OFF		(1 << 9)
>> +#define MX25_ADCQ_CFG_REFP(sel)		((sel) << 7)
>> +#define MX25_ADCQ_CFG_REFP_YP		MX25_ADCQ_CFG_REFP(0)
>> +#define MX25_ADCQ_CFG_REFP_XP		MX25_ADCQ_CFG_REFP(1)
>> +#define MX25_ADCQ_CFG_REFP_EXT		MX25_ADCQ_CFG_REFP(2)
>> +#define MX25_ADCQ_CFG_REFP_INT		MX25_ADCQ_CFG_REFP(3)
>> +#define MX25_ADCQ_CFG_REFP_MASK		GENMASK(8, 7)
>> +#define MX25_ADCQ_CFG_IN(sel)		((sel) << 4)
>> +#define MX25_ADCQ_CFG_IN_XP		MX25_ADCQ_CFG_IN(0)
>> +#define MX25_ADCQ_CFG_IN_YP		MX25_ADCQ_CFG_IN(1)
>> +#define MX25_ADCQ_CFG_IN_XN		MX25_ADCQ_CFG_IN(2)
>> +#define MX25_ADCQ_CFG_IN_YN		MX25_ADCQ_CFG_IN(3)
>> +#define MX25_ADCQ_CFG_IN_WIPER		MX25_ADCQ_CFG_IN(4)
>> +#define MX25_ADCQ_CFG_IN_AUX0		MX25_ADCQ_CFG_IN(5)
>> +#define MX25_ADCQ_CFG_IN_AUX1		MX25_ADCQ_CFG_IN(6)
>> +#define MX25_ADCQ_CFG_IN_AUX2		MX25_ADCQ_CFG_IN(7)
>> +#define MX25_ADCQ_CFG_REFN(sel)		((sel) << 2)
>> +#define MX25_ADCQ_CFG_REFN_XN		MX25_ADCQ_CFG_REFN(0)
>> +#define MX25_ADCQ_CFG_REFN_YN		MX25_ADCQ_CFG_REFN(1)
>> +#define MX25_ADCQ_CFG_REFN_NGND		MX25_ADCQ_CFG_REFN(2)
>> +#define MX25_ADCQ_CFG_REFN_NGND2	MX25_ADCQ_CFG_REFN(3)
>> +#define MX25_ADCQ_CFG_REFN_MASK		GENMASK(3, 2)
>> +#define MX25_ADCQ_CFG_PENIACK		(1 << 1)
>> +
>> +#endif  /* _LINUX_INCLUDE_MFD_IMX25_TSADC_H_ */
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux