This patch adds documentation for the optional syscon-tcsr property in the
Qualcomm DWC3 node. The syscon-tcsr specifies the register and bit used to
configure the TCSR USB phy mux register.
Signed-off-by: Andy Gross <agross@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/usb/qcom,dwc3.txt | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
index ca164e7..dfa222d 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
@@ -8,6 +8,10 @@ Required properties:
"core" Master/Core clock, have to be >= 125 MHz for SS
operation and >= 60MHz for HS operation
+Optional properties:
+- syscon-tcsr Specifies TCSR handle, register offset, and bit position for
+ configuring the phy mux setting.
+
Optional clocks:
"iface" System bus AXI clock. Not present on all platforms
"sleep" Sleep clock, used when USB3 core goes into low
@@ -22,6 +26,11 @@ Documentation/devicetree/bindings/phy/qcom,dwc3-usb-phy.txt
Example device nodes:
+ tcsr: syscon@1a400000 {
+ compatible = "qcom,tcsr-ipq8064", "syscon";
+ reg = <0x1a400000 0x100>;
+ };
+
hs_phy: phy@100f8800 {
compatible = "qcom,dwc3-hs-usb-phy";
reg = <0x100f8800 0x30>;
@@ -51,6 +60,8 @@ Example device nodes:
ranges;
+ syscon-tcsr = <&tcsr 0xb0 0x1>;
+
status = "ok";
dwc3@10000000 {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
