Documentation for hi6220 iommu driver.
Signed-off-by: Chen Feng <puck.chen@xxxxxxxxxxxxx>
---
.../bindings/iommu/hisi,hi6220-iommu.txt | 32 ++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt
diff --git a/Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt b/Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt
new file mode 100644
index 0000000..44f9101
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt
@@ -0,0 +1,32 @@
+Hi6220 SoC SMMU Device Driver devicetree document
+The media system shared the same smmu IP to access DDR memory. And all
+media IP used the same page table.
+
+Below binding describes the system mmu for media system in hi6220 platform
+
+Required properties:
+- compatible: should contain "hisilicon,hi6220-smmu".
+- reg: A tuple of base address and size of System MMU registers.
+- clocks: a list of phandle + clock-specifier pairs, one for each entry
+ in clock-names.
+- clock-names: should contain:
+ * "smmu"
+ * "media-sc"
+ * "smmu-peri"
+- interrupts: An interrupt specifier for interrupt signal of System MMU.
+- #iommu-cells: The iommu-cells should be 0. Because no additional information
+ needs to be encoded in the specifier.
+
+Examples:
+ iommu@f4210000 {
+ compatible = "hisilicon,hi6220-smmu";
+ reg = <0x0 0xf4210000 0x0 0x1000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_MMU_CLK>,
+ <&media_ctrl HI6220_MED_MMU>,
+ <&sys_ctrl HI6220_MEDIA_PLL_SRC>;
+ clock-names = "smmu",
+ "media-sc",
+ "smmu-peri";
+ #iommu-cells = <0>;
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
