Hi Geert, Thank you for the patch. On Thursday 19 November 2015 19:38:41 Geert Uytterhoeven wrote: > Amend the DT bindings to include the optional clock sources for the Baud > Rate Generator for External Clock (BRG), as found on some SCIF variants > and on HSCIF. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > --- > Documentation/devicetree/bindings/serial/renesas,sci-serial.txt | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt > b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index > 8efc9b6f35637fbb..ae907e39b11c2a5a 100644 > --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt > +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt > @@ -46,6 +46,12 @@ Required properties: > On (H)SCI(F) and some SCIFA, an additional clock may be specified: > - "hsck" for the optional external clock input (on HSCIF), > - "sck" for the optional external clock input (on other variants). > + On UARTs equipped with a Baud Rate Generator for External Clock (BRG) > + (some SCIF and HSCIF), additional clocks may be specified: > + - "int_clk" for the optional internal clock source for the frequency > + divider (typically the (AXI or SHwy) bus clock), Isn't this always the same clock as the SCIF functional clock ? > + - "scif_clk" for the optional external clock source for the frequency > + divider (SCIF_CLK). > > Note: Each enabled SCIx UART should have an alias correctly numbered in the > "aliases" node. -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
