Some Arizona devices have the option to use the GPIO5 pin as a second jack detection pin. This patch adds device bindings to specify to the driver that it should use this pin. Note that the second jack detection pin is hard wired in the chip so can only be enabled through the binding, rather than a pin being specified. Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx> Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx> --- drivers/extcon/extcon-arizona.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 27ddf9c..7c9598d 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -1244,6 +1244,11 @@ static int arizona_extcon_device_get_pdata(struct arizona *arizona) device_property_read_u32(arizona->dev, "wlf,gpsw", &pdata->gpsw); + pdata->jd_gpio5 = device_property_read_bool(arizona->dev, + "wlf,use-jd-gpio"); + pdata->jd_gpio5_nopull = device_property_read_bool(arizona->dev, + "wlf,use-jd-gpio-nopull"); + return 0; } -- 1.7.2.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
