Re: [RFC/PATCH] pinctrl: qcom: Add generic ssbi and spmi GPIO/MPP bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Nov 17, 2015 at 05:00:26PM -0800, Stephen Boyd wrote:
> The drivers don't really need to know which PMIC they're for, so
> make a generic binding for them. This alleviates us from updating
> the drivers every time a new PMIC comes out. It's still
> recommended that we update the binding with new PMIC models and
> always specify the specific model for the MPPs and gpios before
> the generic compatible string in devicetree, but this at least
> cuts down on adding more and more compatible strings to the
> drivers until we actually need them.
> 
> Cc: <devicetree@xxxxxxxxxxxxxxx>
> Cc: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
> Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
> ---

Seems okay to me. I assume you are going to update all the dts files?

Rob

> 
> We can also figure out the number of the pins from the number
> of interrupts, so we really don't need to even look at the size of the
> reg property or model number for the spmi and ssbi modules. I'll propose
> that change as well tomorrow.
> 
>  Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 5 ++++-
>  Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt  | 5 ++++-
>  drivers/pinctrl/qcom/pinctrl-spmi-gpio.c                     | 1 +
>  drivers/pinctrl/qcom/pinctrl-spmi-mpp.c                      | 1 +
>  4 files changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> index a90c812ad642..f1e4643f4132 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> @@ -17,6 +17,9 @@ PMIC's from Qualcomm.
>  		    "qcom,pm8994-gpio"
>  		    "qcom,pma8084-gpio"
>  
> +		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
> +		    if the device is on an spmi bus or an ssbi bus respectively
> +
>  - reg:
>  	Usage: required
>  	Value type: <prop-encoded-array>
> @@ -183,7 +186,7 @@ to specify in a pin configuration subnode:
>  Example:
>  
>  	pm8921_gpio: gpio@150 {
> -		compatible = "qcom,pm8921-gpio";
> +		compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio";
>  		reg = <0x150 0x160>;
>  		interrupts = <192 1>, <193 1>, <194 1>,
>  			     <195 1>, <196 1>, <197 1>,
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
> index d74e631e10da..e28320b18ecb 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
> @@ -18,6 +18,9 @@ of PMIC's from Qualcomm.
>  		    "qcom,pm8994-mpp",
>  		    "qcom,pma8084-mpp",
>  
> +		    And must contain either "qcom,spmi-mpp" or "qcom,ssbi-mpp"
> +		    if the device is on an spmi bus or an ssbi bus respectively.
> +
>  - reg:
>  	Usage: required
>  	Value type: <prop-encoded-array>
> @@ -157,7 +160,7 @@ to specify in a pin configuration subnode:
>  Example:
>  
>  	mpps@a000 {
> -		compatible = "qcom,pm8841-mpp";
> +		compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
>  		reg = <0xa000>;
>  		gpio-controller;
>  		#gpio-cells = <2>;
> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> index df4413023e21..9f9979903fcb 100644
> --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> @@ -806,6 +806,7 @@ static const struct of_device_id pmic_gpio_of_match[] = {
>  	{ .compatible = "qcom,pm8941-gpio" },	/* 36 GPIO's */
>  	{ .compatible = "qcom,pm8994-gpio" },	/* 22 GPIO's */
>  	{ .compatible = "qcom,pma8084-gpio" },	/* 22 GPIO's */
> +	{ .compatible = "qcom,spmi-gpio" }, /* Generic */
>  	{ },
>  };
>  
> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
> index 7b4136a22c5b..5a4373dd9c61 100644
> --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
> @@ -909,6 +909,7 @@ static const struct of_device_id pmic_mpp_of_match[] = {
>  	{ .compatible = "qcom,pm8941-mpp" },	/* 8 MPP's */
>  	{ .compatible = "qcom,pm8994-mpp" },	/* 8 MPP's */
>  	{ .compatible = "qcom,pma8084-mpp" },	/* 8 MPP's */
> +	{ .compatible = "qcom,spmi-mpp" },	/* Generic */
>  	{ },
>  };
>  
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux